urmet domus 1093 Series User Manual/Instructions

Brand: urmet domus

Model: 1093 Series

Category: Digital Video Recorders (DVR)

Type: User Manual/Instructions

DS1093-132C

Mod.

1093

H.264 WITH HDMI NVR

NVR Boost 2.0 Series

8CH Ref. 1093/908H

32CH Ref. 1093/932H

8CH POE Ref. 1093/908HP

16CH POE Ref. 1093/916HP

32CH POE Ref. 1093/932HP

USER MANUAL INSTRUCTIONS

DS1093-132C 2

TABLE OF CONTENTS

1 General information ..................................................................................................................................5

1.1 Product description ....................................................................................................................5

1.1.1 General features ........................................................................................................................................... 5

1.2 Opening the box ........................................................................................................................6

1.2.1 Contents of the box ....................................................................................................................................... 6

1.3 Warnings ...................................................................................................................................7

1.3.1 Power............................................................................................................................................................ 7

1.3.2 Safety precautions ........................................................................................................................................ 7

1.3.3 Installation precautions ................................................................................................................................. 7

1.3.4 Cleaning the device ...................................................................................................................................... 7

1.3.5 Hard disk ....................................................................................................................................................... 7

1.3.6 Image recording ............................................................................................................................................ 7

1.3.7 Privacy and Copyright ................................................................................................................................... 7

1.3.8 Software upgrades ........................................................................................................................................ 7

1.3.9 Firmware upgrades ....................................................................................................................................... 8

1.3.10 Network installation ....................................................................................................................................... 8

1.3.11 Network connection ...................................................................................................................................... 8

1.4 NVR Front Panel .......................................................................................................................8

1.4.1 Ref. 1093/908H-932H-908HP-916HP ........................................................................................................... 8

1.4.2 Ref. 1093/932HP .......................................................................................................................................... 9

1.5 NVR Rear Panel ........................................................................................................................9

1.5.1 Ref. 1093/908H-932H ................................................................................................................................... 9

1.5.2 Ref. 1093/908HP-916HP ............................................................................................................................ 10

1.5.3 Ref. 1093/932HP ........................................................................................................................................ 10

1.5.4 RS485/Sensor/Alarm port functions ............................................................................................................ 11

1.6 Remote Controller .................................................................................................................. 11

1.7 Mouse Operation .................................................................................................................... 12

1.8 HDD installation ...................................................................................................................... 12

1.9 Web Camera and Monitor Connection ................................................................................... 12

1.10 Power Supply Connection ...................................................................................................... 12

2 NVR Boot Up ........................................................................................................................................... 13

2.1 NVR System Initialization ....................................................................................................... 13

2.2 Startup Wizard ........................................................................................................................ 13

2.3 Configuring IP Cameras ......................................................................................................... 14

3 NVR Menu ................................................................................................................................................ 16

3.1 Pop-up Menu .......................................................................................................................... 16

3.2 NVR Menu Guide ................................................................................................................... 17

3.3 NVR Main Menu ..................................................................................................................... 18

3.4 Display .................................................................................................................................... 18

3.4.1 IP Camera ................................................................................................................................................... 18

3.4.2 RTSP function ............................................................................................................................................. 19

3.4.3 IP Camera Setup ........................................................................................................................................ 20

3.4.4 Output ......................................................................................................................................................... 20

3.4.5 Image Control ............................................................................................................................................. 21

3.4.6 Privacy Zone ............................................................................................................................................... 21

3.5 Record .................................................................................................................................... 22

3.5.1 Rec Parameters .......................................................................................................................................... 22

3.5.2 Schedule ..................................................................................................................................................... 22

3.6 Search .................................................................................................................................... 23

3.6.1 Record Search ............................................................................................................................................ 23

3.6.2 Event Search .............................................................................................................................................. 24

3.6.3 Log Search ................................................................................................................................................. 25

3.6.4 Play Backup Files ....................................................................................................................................... 25

3.7 Network .................................................................................................................................. 27

3.7.1 Network ....................................................................................................................................................... 27

3.7.2 Main Stream/ Sub Stream/ Mobile Stream .................................................................................................. 27

3.7.3 E-Mail.......................................................................................................................................................... 28

3.7.4 DDNS.......................................................................................................................................................... 28

3.7.5 Urmet DDNS Account Setup ....................................................................................................................... 29

3.7.6 RTSP .......................................................................................................................................................... 30

3.7.7 Switch ......................................................................................................................................................... 31

ENGLISH

DS1093-132C 3

3.8 Alarm ...................................................................................................................................... 32

3.8.1 Motion ......................................................................................................................................................... 32

3.8.2 Alarm .......................................................................................................................................................... 33

3.9 Device ..................................................................................................................................... 34

3.9.1 HDD ............................................................................................................................................................ 34

3.9.2 Cloud Storage ............................................................................................................................................. 34

3.10 System .................................................................................................................................... 35

3.10.1 General ....................................................................................................................................................... 35

3.10.2 DST ............................................................................................................................................................ 35

3.10.3 NTP ............................................................................................................................................................ 35

3.10.4 Users .......................................................................................................................................................... 36

3.10.5 Info .............................................................................................................................................................. 36

3.10.6 Channel Info ............................................................................................................................................... 37

3.11 Advanced ................................................................................................................................ 37

3.11.1 Maintain ...................................................................................................................................................... 37

3.11.2 Events ......................................................................................................................................................... 38

3.12 PTZ Control ............................................................................................................................ 38

3.12.1 Cruise Set ................................................................................................................................................... 38

3.13 Menu Lock .............................................................................................................................. 39

3.14 Split Mode ............................................................................................................................... 39

3.15 Stream Switch ........................................................................................................................ 39

3.16 View Effect .............................................................................................................................. 39

3.17 Start Sequence ....................................................................................................................... 39

3.18 Mute ........................................................................................................................................ 39

3.19 Start Cruise ............................................................................................................................. 39

3.20 Playback ................................................................................................................................. 39

4 Web Application Manager ..................................................................................................................... 40

4.1 ActiveX control download and installation .............................................................................. 40

4.2 Web Interface NVR Accessing via IP Address, URL or Urmet DDNS Account ..................... 41

4.3 Live Interface .......................................................................................................................... 41

4.3.1 Menu Bar .................................................................................................................................................... 42

4.3.2 Live Display ................................................................................................................................................ 42

4.3.3 Video Control .............................................................................................................................................. 42

4.3.4 PTZ Control ................................................................................................................................................ 43

4.4 Playback ................................................................................................................................. 43

4.4.1 Record Search ............................................................................................................................................ 44

4.4.2 Playback Control ......................................................................................................................................... 44

4.5 Parameter Setting ................................................................................................................... 46

4.5.1 Display ........................................................................................................................................................ 46

4.5.2 Record ........................................................................................................................................................ 48

4.5.3 Network ....................................................................................................................................................... 50

4.5.4 Alarm .......................................................................................................................................................... 52

4.5.5 Device ......................................................................................................................................................... 53

4.5.6 System ........................................................................................................................................................ 54

4.5.7 Advanced .................................................................................................................................................... 55

4.6 Local Setting ........................................................................................................................... 57

4.7 Logout ..................................................................................................................................... 57

5 Mobile Software ...................................................................................................................................... 58

5.1 Smartphone Device ................................................................................................................ 58

5.1.1 Urmet iUVS Software Mobile ...................................................................................................................... 58

5.2 Tablet Device .......................................................................................................................... 62

5.2.1 Urmet IUVSpad and iUVStab Mobile .......................................................................................................... 62

5.3 P2P Function .......................................................................................................................... 66

6 1093/908H - 1093/932H Specifications (Pal Format) ........................................................................... 69

7 1093/908HP - 1093/916HP – 1093/932HP Specifications (Pal Format) .............................................. 70

8 Maximum recording time with 2000GB hard disk ............................................................................... 71

8.1 Ref. 1093/908H – 1093/932H – 1093/908HP – 1093/916HP – 1093/932HP ........................ 71

9 Appendix ................................................................................................................................................. 74

9.1 Record Alarm setting .............................................................................................................. 74

DS1093-132C 4

9.2 Active X installation ................................................................................................................ 74

9.3 FAQ ........................................................................................................................................ 76

9.4 Usage Maintenance ................................................................................................................ 76

DS1093-132C 5

1 GENERAL INFORMATION

This document describes how to install and use the URMET NVR Boost 2.0 Series ref. 1093/908H – ref. 1093/932H - ref.

1093/908HP – ref. 1093/916HP – ref. 1093/932HP.

Read this manual which contains information for correct, safe use carefully.

Keep this manual at hand so that you can refer to it when needed.

1.1 PRODUCT DESCRIPTION

The URMET S.p.A. product is a net video recorder capable of recording from several IP cameras to internal hard disk.

1.1.1 GENERAL FEATURES

 Triplex mode (recording, play and network transmission at the same time)

 H. 264 video compression, with 1080P resolution

 Windows Graphical interface; embedded real-time Linux 2.6 Operation System

 Recording in 1080P Resolution

 Multiple or single recording

 HDMI/ VGA Output

 User friendly Menu

 Multiple operation modes (Preview, record, playback, backup, network surveillance and mobile phone monitoring)

 Main Stream, Sub Stream and Mobile stream network transmission

 Configuration with the Urmet DDNS Account ID via Internet Explorer, Mobile, Client Software

 P2P function only for Mobile use and Urmet UVS Client Software

 ADPCM audio compression

 Remote control (via browser and via Urmet UVS Client Software)

 Remote control through mobile

 Supports Zoom in/out and sequence function

 Alarm management

 Multiple alarm recording

 Alarm notification through email

 Auto-maintenance mode

 Backup on USB 2.0 in front Panel (flash drive or hard disk)

 Rear USB 2.0 and 3.0 ports for Backup, upgrade and mouse operation

 Rear e-SATA Port for Backup only for Ref. 1093/932HP

 Loading and saving NVR settings using USB stick

 Remote Control

 Multilanguage OSD

 Software Mobile for the following Platforms: iOS (Iphone and iPad), Android (Smartphone and Tablet)

 Watermark

 Syncronous Playback for NVR 8/16/32 ch. Models

DS1093-132C 6

Here follow a Summarize about the most Features:

1.2 OPENING THE BOX

Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either

missing or damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it is

damaged.

1.2.1 CONTENTS OF THE BOX

 NVR

 Quick Guide

 CD containing Urmet software and user manuals

 Mouse

 IR remote control, (included 2 batteries size AAA)

 Brackets for installation in a rack (only for Ref. 1093/932HP)

 Screws and bolts for rack mounting (only for Ref. 1093/932HP)

 Power adapter for Ref. 1093/908H, Ref. 1093/932H, Ref. 1093/908HP, Ref. 1093/916HP

 Shuko plug (2 Shuko plugs only for Ref. 1093/932HP)

 Italian plug (2 Italian plugs only for Ref. 1093/932HP)

IMPORTANT NOTE

Accessories may be changed without prior notice.

Function

Brief and Description

Real time

monitoring

Double video output with monitor, VGA virtual output port or HDMI Output; Support

CMS Client Software and MP live surveillance and also support zoom in/out, auto

sequence and PIP display.

Record

H.264 video compression format; record quality/resolution/frame rate adjustable,

multiple record modes (Always, Scheduled, Manual, Alarm (if available), Motion

detection and remote record)

Record storage

Support SATA large capacity HDD and save real-time record image to HDD.

Playback

Support NVR single CH and multiple CH Search/Playback of recorded files.

Backup

Support NVR backup via USB flash drive, removable drive, Recorder and network.

Alarm Setting

Supports HDD & video input alarm management and external alarm signal inputs.

Network

operation

Supports remote surveillance by authority users to increase system security.

Mouse

Operation

Supports Mouse operation for faster menu navigation.

PTZ Control

Supports PTZ camera operations through RS-485.

DS1093-132C 7

1.3 WARNINGS

1.3.1 POWER

 Check mains rating before plugging the power unit in.

 Do not pull the cable to unplug the device.

 Switch the device off before unplugging power unit. This operation must not be performed when the NVR is

recording, playing or from the configuration menu. Stop recordings and playback in progress before

disconnecting power from the device to prevent damaging the hard disk beyond repair.

1.3.2 SAFETY PRECAUTIONS

 Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material

(solid or liquid) inside. If this should accidentally occur, disconnect the device from the mains and have it

inspected by qualified personnel.

 Never open the device. In all cases, contact a qualified personnel or authorised service centre for repairs.

 Keep the device away from children, to prevent accidental damage.

 Do not touch the device with wet hands to prevent electrical shock or mechanical damage.

 Do not use the device if it should fall or the external casing is damaged. Risk of electrocution if the device is used

in such conditions. Contact the retailer or authorised installer.

1.3.3 INSTALLATION PRECAUTIONS

 To prevent overheating the device, arrange it in a position allowing the flow of air through the slots in the casing.

Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install sources of

heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas subject to

excessive dust, mechanical vibrations or shocks.

 Do not arrange this device on an unstable surface, such as a tottering or slanted table. The device could fall

causing injury or mechanical failures.

 Do not install the device in a place where it could be exposed to humidity or water. Do not direct a jet of water

onto the device: risk of fire, electrocution or mechanical failure.

 Stop using the device if water or other material should penetrate inside: risk of fire and electrocution. Contact the

retailer or authorised installer.

 Do not place heavy or heat generating objects on top of the device: this could damage the casing and/or increase

internal temperature causing faults.

 Do not cover the device with a cloth while it is running to prevent deforming the external casing and overheating

the internal parts: risk of fire, electrocution and mechanical failure.

 Keep magnets and magnetised objects away from the device to prevent faults.

 Do not use the device in presence of smoke, vapour, humidity, dust or intense vibrations.

 Wait for a while before operating a device immediately after transporting it from a cold place to a warm place and

vice versa. Wait on average for three hours: this will allow the device to adapt to the new ambient (temperature,

humidity, etc.).

1.3.4 CLEANING THE DEVICE

 Rub delicately with a dry cloth to remove dust and dirt.

 Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.

 Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to clean the

device to prevent deformation, deterioration or scratches to the paint finish.

1.3.5 HARD DISK

 The hard disk installed in this device is sensitive to shocks, differences in temperature and vibrations. Disrespect

of these precautions can compromise correct operation of the device and cause loss of data stored on the hard

disk.

 If repairs are required, it is advisable to backup all important data before taking the device to the service centre.

URMET S.p.A. is not liable for loss of stored data.

 The addition of a hard disk must be performed by qualified technical personnel or by contacting the technical

assistance service.

1.3.6 IMAGE RECORDING

 This device was designed to record images, not as a burglar alarm. URMET S.p.A. cannot be held liable for loss

or damage following theft sustained by the user.

 Make a test recording before using the device to make sure that is working correctly. Please note that URMET

S.p.A. is not liable for loss of stored data consequent to loss or damage caused by incorrect observation

installation, use, improper use or malfunctioning of the device.

 This device contains precision electronic components. Protect the device from shocks to ensure correct recording

of images.

1.3.7 PRIVACY AND COPYRIGHT

 The NVR (Net video recorder) Boost Series is a device for CCTV systems. Recording of imagines is subject to

the laws in force in your country. Recording of images protected by copyright is forbidden.

 Product users shall be responsible for checking and respecting all local rules and regulations concerning

monitoring and recording video signals. The manufacturing SHALL NOT BE LIABLE for use of this product not in

compliance with the laws in force.

1.3.8 SOFTWARE UPGRADES

 Regularly check the specific section of the manufacturer’s web site at http://www.urmet.it for software upgrades.

DS1093-132C 8

1.3.9 FIRMWARE UPGRADES

 Periodically check the URMET S.p.A. Customer Service Technical Area for firmware upgrades.

1.3.10 NETWORK INSTALLATION

 The factory default IP address of the NVR is DHCP.

 Using the NVR Network OSD Menu, assign the NVR an IP address which hasn't been assigned to other devices

in order to prevent any network conflict.

 After assigning a proper IP address to the NVR, it can be connected to the Network.

1.3.11 NETWORK CONNECTION

 When connecting to a remote PC (using Client Software or I.E.), remember that all video channels used by the

PC correspond to a “unicast” type connection (TCP, RTP,UDP etc).

 The NVR is capable of supporting up to 3 “unicast” connections, connected in TCP, RTP, UDP.

1.4 NVR FRONT PANEL

1.4.1 REF. 1093/908H-932H-908HP-916HP

P.S NVR is short for Network Video Recorder.

Item

Key title or

Indicator

Remark

Indicator Function & Description

Power Indicator

PWR

If the “Green” indicator is on, NVR is getting power normally.

IR Receiver

Receive IR signal from Remote Controller.

HDD Indicator

HDD

If the “Red” indicator flashes, the hard drive is being read or

written to. If the indicator is always on, it means the hard disk is

abnormal, unformatted or has no recording files.

USB

USB port

DS1093-132C 9

1.4.2 REF. 1093/932HP

Item

Key title or

Indicator

Remark

Indicator Function & Description

Power Indicator

PWR

If the “Green” indicator is on, NVR is getting power normally.

IR Receiver

Receive IR signal from Remote Controller.

HDD Indicator

HDD

If the “Red” indicator flashes, the hard drive is being read or

written to. If the indicator is always on, it means the hard disk is

abnormal, unformatted or has no recording files.

USB

USB port

1.5 NVR REAR PANEL

1.5.1 REF. 1093/908H-932H

Item

Physical Port

Connection Method

Power switch

Startup and shutdown

Power port

Connect the attached power supply

Sensor/Alarm

Connect to sensor or alarming device

USB Port

Connect USB devices, such as USB mouse

USB Port 3.0

Connect USB devices till to 3.0, such as Backup and Upgrade Firmware

HDMI Port

HDMI high definition port

VGA Port

Connect to VGA monitor, such as PC monitor

Audio Output

Audio signal output, RCA interface

LAN Port

Network input interface of the router/Connect to web camera.

DS1093-132C 10

1.5.2 REF. 1093/908HP-916HP

1.5.3 REF. 1093/932HP

Item

Physical Port

Connection Method

Power switch

Startup and shutdown

Power port

Connect the attached power supply

Sensor/Alarm

Connect to sensor or alarming device

USB Port

Connect USB devices, such as USB mouse

USB Port 3.0

Connect USB devices till to 3.0, such as Backup and Upgrade Firmware

HDMI Port

HDMI high definition port

VGA Port

Connect to VGA monitor, such as PC monitor

Audio Output

Audio signal output, RCA interface

WAN Port

Network input interface of the router/Connect to web camera.

LAN Port

LAN network interface, support POE, can supply power to the camera.

Item

Physical Port

Connection Method

Power ports

Connect the attached power supply at 100÷240 Vac, 50÷60Hz

Power switches

Startup and shutdown

Sensor/Alarm

Connect to sensor or alarming device

e-SATA Port

Connect SATA devices for Backup

USB Port 3.0

Connect USB devices till to 3.0, such as Backup and Upgrade Firmware

HDMI Port

HDMI high definition port

VGA Port

Connect to VGA monitor, such as PC monitor

Audio Output

Audio signal output, RCA interface

USB Port

Connect USB devices, such as USB mouse

WAN Port

Network input interface of the router/Connect to web camera.

LAN Port

LAN network interface, support POE, can supply power to the camera.

DS1093-132C 11

1.5.4 RS485/SENSOR/ALARM PORT FUNCTIONS

Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input according to the alarm device

you purchased.

Alarm output: Connect to the two ports marked with “out”

PTZ Port (RS-485 and KB PINS):Not available on NVR.

1.6 REMOTE CONTROLLER

Item

Key title

Key function

1-8

Channel select 1-8; Numeric key

9、0

Numeric key; Clicking numeric “0” allow you

switch to GUI (Graphical user Interface)

function

ALL

Multiple display mode

Enter into Main menu/Exit

▲

Up arrow key, Volume adjust

▼

Down arrow key, Volume adjust

◄/

Left/Down key,

Decrease/increase parameter value of

control bar

SEL

Select key/Edit key;

Confirm the selected operation.

Rewind key

Enter into record search menu;

Play key

Forward key

●

Record key

Pause/Sequence key

■

Stop manual record; stop playing

Audio/Search

Audio on/off and search playback

Mute

Mute on/off

DS1093-132C 12

1.7 MOUSE OPERATION

Except using buttons of front panel or remote controller, you also can use mouse to perform system operation.

TYPE

Function

Click left key of

Mouse

In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-

in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to

enter into any sub menu directly.

After entering into main menu, clicking left key could enter into any sub menu; On

[Detailed file] menu mode, clicking left key could playback one recording file.

Change the status of check box and motion detection area.

Clicking combo box to access pull-down menu; Click left key to stop dwell time display

when dwell time display is activated.

By clicking left key you can adjust Color control bar and volume control bar.

Clicking combo box to access pull-down menu

By clicking left key you can select values in edit boxes or pull-down menu and supports

special symbol, numeric and character input, use instead of [Enter- ] or [Backspace

]

Click right key of

Mouse

In live display mode, clicking right key will display pop-up menu.

In Main menu or sub menu mode, clicking right key will exit current menu.

Double-click Left

key of Mouse

In live display or playback mode, double-clicking left key will maximize the screen.

Moving Mouse

Select menu item

Sliding Mouse

On motion mode, sliding mouse will select motion area; On [Color set] menu mode,

sliding mouse will adjust color control bar and volume control bar.

1.8 HDD INSTALLATION

Caution: Please do not take out hard drive when NVR is running!

HDD Installation:

1. Cut power firstly, and then remove screws on both sides and rear panel and open NVR upper cover.

2. (Connect HDD data cable and power cable to the main board. Install the HDD and fix it on the bracket and then

connect the HDD power cable and data cable.

3. Put the upper cover back carefully

Note: If user requires higher performance HDD, it is strongly recommended to use hard drive for security.

1.9 WEB CAMERA AND MONITOR CONNECTION

Transmit signals of web camera to NVR by the network cable and connect VGA port and HDMI port for output (Refer to

section 1.5 Rear Panel).

1.10 POWER SUPPLY CONNECTION

Please use attached power adapter to connect NVR. Before power on, make sure network port is well connected.

DS1093-132C 13

2 NVR BOOT UP

2.1 NVR SYSTEM INITIALIZATION

After connecting the power cable of NVR to wall outlet and pressing the power button, you will enter into the NVR system

initializing screen shown as Picture.

2.2 STARTUP WIZARD

After NVR startup is completed, the startup wizard will be displayed if enabled. If you do not want to make any setting, you

may click “Don't show this window next time” to cancel, as shown in picture.

Wizard setting menu includes: Homepage, Network setup, IPC setup, Record Schedule and hard disk maintenance.

1. Homepage and network setup. In network setup page, user may set the network of NVR.

2: IPC Setup: In this page, user may add and delete IPC;

3: Record Schedule: In this page, user may set recording time and scheduled recording of NVR.

Note: The illustration in the user

manual may not be the same as the

menu interface in your monitor. All the

illustrations are for users’ reference.

DS1093-132C 14

4. HDD: It supports HDD formatting and overwriting type.

5. Main Interface

Note: When internal HDD is not connected to NVR, When internal HDD is not connected to NVR or the HDD is not

formatted, on Live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into

[EventAlarm] to set HDD loss, HDD space not enough and alarm output to “off”.

2.3 CONFIGURING IP CAMERAS

Ref. 1093/908H-932H-908HP-916HP-932HP models provide no analog camera connection; therefore it can be used as

NVR only, with IP cameras at 1080P, 960P, 720P, D1 and VGA Resolutions in Main Stream in local display or CIF and

QVGA resolution in Sub Stream in Web Interface IE, Urmet UVS Client Software and Urmet iUVS Software Mobile.

Before configuring IP cameras, please ensure that all IP cameras are connected to the same network as your NVR and

the network settings for your NVR is properly set up.

DS1093-132C 15

In order to set IP Camera:

1. Select the + key in order to add IP Camera, as shown in picture below.

2. Select Search in order to find IP cameras in the Network.

3. Select the Device from the list. The devices present on the list are supported by Device Search Tool and are

detected from the NVR. If it doesn’t detect any device, it is possible to set manually the parameters of devices.

4. Put the settings of IP Camera, like IP Camera name, IP Address, Ports, User Name and Password.

5. Select Add and the IP Camera will be online and displayed in LIVE Preview.

NOTE

The quality of resolution, frame rate and bit rate depends on the performance of the IP camera.

DS1093-132C 16

3 NVR MENU

3.1 POP-UP MENU

After finishing system initialization, click right key of mouse on preview interface or slide the mouse to the bottom of screen

to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-Pics, Auto Cruise,

Record Search, Sequence, Volume setting and Stream switching, shown as Picture below.

The options in the pop-up menu may be varied slightly according to different parameter settings. The options in the menu

will be explained in detail in the following chapters.

DS1093-132C 17

3.2 NVR MENU GUIDE

Display

IPC Setup

Output

Image Control

IP Camera

Schedule

Record

Rec Param

Event Search

Record Search

Log Search

Sub Stream

Network

Main Stream

Network

DDNS

RTSP

Switch

System

Device

General

DST

NTP

Users

Maintain

Advance

Events

HDD

Info

Channel Info

Alarm

Motion

Main Menu

Privacy Zone

Cloud Storage

Mobile Stream

DS1093-132C 18

3.3 NVR MAIN MENU

3.4 DISPLAY

3.4.1 IP CAMERA

Go to“Main Menu”→“Display”→“IP Camera” to enter into the interface shown as Picture below.

It is possible to select the function [Auto Assign Channels] in order to quick add the IP Camera connected to LAN

or select [Add All] or [User Defined Add] in order to add manually the IP camera connected to LAN.

 Channel: IPC camera channel

 Edit: Modify the name and location of channels, change

other

IPC or protocols, etc, as shown in Picture.

 State: Display IPC on-line state

 IP address: Modify IP address of IPC camera.

 IP Address/Domain: IP address of the IPC connected of

the channel

 Subnet Mask: IPC camera subnet mask

 Port: Connection port number of the currently set IPC.

 Manufacturer: Manufacturer for different IPC

 Device type: Add IPC with different protocols.

 Protocol: The selected access protocol for IPC to connect

to NVR

 MAC Address: Physical address for device

 Software: Display current version of IPC.

DS1093-132C 19

3.4.2 RTSP FUNCTION

The RTSP is used to view the video Main Streams/Sub Streams of an IP camera connected to the NVR on a web page of

the PC or on the local monitor, through the RTSP port. This is advantageous for managing the live stream of an IP ONVIF

camera connected to the NVR.

Go to the main menu →“Display” →“IP Camera” and select “User-defined add”. Then click on an available camera from

the detected device list.

Click on “Protocol Manage”. The following page will appear:

The following parameters can be set:

 Protocol Manage: Define the name of the RTSP protocol to be associated to the IP camera.

The following can be defined for each Main Stream/Sub Stream:

 Port: the default RTSP port is 544, but this can be changed by the user.

 Resource path: Copy the resource path used for the VLC software installed in the PC for the IP camera to be

added. Afterwards, it will also be possible to view the live stream on local NVR through the configured RTSP port.

Confirm to quit at this point. Now, the IP camera detected using the protocol which exploits the RTSP port can be added to

the live grid of the NVR.

DS1093-132C 20

3.4.3 IP CAMERA SETUP

Go to“Main Menu”→“Display”→“IPC Setup” to enter into the interface shown as Picture below.

3.4.4 OUTPUT

Go to“Main Menu”→“Display”→“Output” to enter into the interface shown as Picture below.

 Channel: Select channel number.

 Show Name: Display the channel name.

 Show Time: Tick the checkbox to display time.

 Channel Name: Name marked on IPC

 Date Format: Set date format such as m/d/y or y/m/d

 Time Format: 12 hour or 24 hour

 Refresh Rate: select the frequency in Hz.

 OSD Position: Freely set the position of IPC name and

time

 Color setting: Adjust the hue, brightness, contrast

and saturation of the IPC of the channel.

 Video Output: Live Output

 Seq Mode: Set sequence mode

 SEQ Dwell Time: Sequence dwell time is set

5 seconds by default. User may set it as

required.

 VGA/HDMI Resolution: VGA output or HDMI

output.

Including: 1024×768,1280×1024, 1440×900,

1280×720, 1920×1080

NOTE:

This Function allows to control the OSD Menu,

switching HDMI and/or VGA Video Output.

Set the HDMI/VGA Resolution to 1920x1080 and

connecting both video output (i.e. VGA and HDMI)

on NVR, it is possible to display the OSD NVR

Menu for both video output on monitor, if monitor

model supports the 1080P resolution in VGA video

output. Otherwise it is possible to decrease the

HDMI/VGA Resolution to 1024x768 and display the

OSD NVR Menu for both video output connected

(i.e. HDMI and VGA).

 Transparency: Set the transparency of the

menu in the range of 0—128.

Page is loading ...

urmet domus 1093 Series User Manual/Instructions

Brand: urmet domus

Model: 1093 Series

Category: Digital Video Recorders (DVR)

Type: User Manual/Instructions

Download PDF

report

urmet domus 1093 Series User Manual/Instructions

urmet domus 1093 Series User Manual/Instructions

Related papers

Other documents