2. Neopost
  3. IS-5000

Neopost IS-5000 Ppi Installation

  • Hello! I've reviewed the user manual for IS-5000 and IS-6000 mailing machines, focusing on PPI installation. The document provides clear steps on how to install the PPI via USB key, using the supervisor menu. It covers adding new PPIs and repeating the process. I'm ready to answer your questions about this process.
  • How do I access the machine's menu?
    Where is the USB port located?
    How to start PPI installation process
1
Please nd attached your PPI USB key, please use the
following instructions to install your PPI onto your mailing
machine.
Ensure the machine is awake by checking the sleep/reset
key is showing green.
1. From the “HOME SCREEN” press the “MENU” key.
2. Select the “SUPERVISOR” option from the list.
3. Enter the “SUPERVISOR PIN” (meter specic) and press
”OK”.
4. From the SUPERVISOR menu select ”OPTIONS &
UPDATES”.
5. In the following screen select “PPI MANAGEMENT”.
IS-5000
IS-5000 & IS-6000 PPI INSTALLATION
IS-6000
IS-5000 IS-6000
2
6. In the “PPI MANAGEMENT” screen there will be 5 spaces
for PPI’s, select “ADD NEW”.
7. The machine will prompt you to “INSERT YOUR USB KEY”,
insert the USB key into one of the free USB ports on
either side of the base.
IS-5000 IS-6000
8. Once the USB key has been entered press “OK”.
3
9. The machine will display the le on the key, select it and
press “OK”.
10. When the download is successful, the machine will
display a “PPI DOWNLOAD IS SUCCESSFUL” message,
press “OK” and remove the USB key.
11. In the PPI management screen you will see one of the
slots occupied by the new PPI.
IS-5000 IS-6000
12. PPI download is done. If you have more PPI dies to load
please repeat steps 7 – 12, otherwise return to the main
user screen by pressing the sleep/reset button twice.
44152127G/A - 01/02/2015
/