2. ROOMS TO GO
  3. 23111305

ROOMS TO GO 23111305 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Alek 1129-3 Round End Table. This document outlines the step-by-step process to assemble your new table, including attaching the legs, frames and glass shelves. It uses a series of illustrations to guide you through the process. I am here to help answer any questions you might have regarding the assembly process or table features described in the document.
  • What is the first step in assembling the table?
    What is the purpose of the antiskid pads?
    When should I tighten all the bolts?
ROOMS
TO GO
SKU:23111292
ALEK 1129-3 ROUND END TABLE
ASSEMBLY INSTRUCTION
Thank you for purchasing this quality product.Be sure to check all packing
material carefully for small parts which may have come loose inside the carton
during shipment.Identify and count all parts and compare with the Parts list
below:
No. PART DESCRIPTION
MADE IN CHINA
Q.TY
Allen Wrench:M4
2
4
5
6
8
4
1
9
10
Bolt:1/4"*5/8"
1
8
4
4
1
1
11
Leg 4
1
1
2
6
8
Step 1 9
5
Step 2
Step 3 1
211
Step 4
10
Step 5
74
Step 6
Finish
Antiskid Pad
Pad
7 1
Bottom frame
Top frame
Top glass
Bottom glass
Metal cap
ASSEMBLY INSTRUCTION
2)Using Bolt(2),Allen Wrench(1)to assembly Leg(6) and Bottom frame(8) as step 1.
3)Using Pad(5) to the Bottom frame(8),then put the Bottom glass(9) as step2.
4)Using Allen Wrerch(1)and Bolt(2) to fasten the Top frame as step3.
5)Using Antiskid Pad(4)and Metal Cap(11) to the Top frame as step4.
6)Put the Top glass(10) to the Top frame(7) as step5.
7)Enjoy your table for a long time to come.
1)Carefully unwrap the furniture and place all parts on a clean soft blanket.
ATTENTION:
Do not tighten 100% !!
Tighten it 100% after step3
ATTENTION:
Do not tighten 100% !!
Tighten it 100% after step3
/