Contec CPS-MG341-ADSC1-931 Reference guide

Reference Manual

(Software)

CONTENTS

M2M Gateway Series

Integrated type

Firmware version 3.0.0 or later

Introduction .................................................................. 8

Safety Precautions .................................................... 17

Set the Computer Network ................................... 21

CONPROSYS WEB Setting ..................................... 27

Easy Data Process and Control ......................... 139

Monitoring Edit ...................................................... 189

Tag Edit ...................................................................... 202

Collecting Information From PLC .................... 210

Transferring Measured Data to Server ........... 220

Using The Product As OPC UA Sever ............. 230

Set the Auto Send Mail ....................................... 242

Connecting to Azure IoT Hub ........................... 247

MTConnect ............................................................... 264

FTP Communication ............................................. 268

MQTT Publish And Subscribe ........................... 273

BACnet ....................................................................... 307

Set Up Troubleshooting ...................................... 332

Appendix ................................................................... 336

Customer Support and Inquiry ......................... 378

Index ........................................................................... 380

— 2 —

Table of Contents

Introduction ...................................................................... 8

1. Product Outline .......................................................................................................................................................9

1. An Example Of System Composition .......................................................................................................9

2. Gateway Series Function ............................................................................................................................ 10

2. Manual Composition .......................................................................................................................................... 12

3. Procedure Until Ready To Use ........................................................................................................................ 13

4. Related Manuals ................................................................................................................................................... 14

5. Online Help ............................................................................................................................................................ 15

6. Check The Firmware Version ........................................................................................................................... 16

Safety Precautions ......................................................... 17

1. Safety Information ............................................................................................................................................... 18

2. Handling Precautions ......................................................................................................................................... 19

3. Security Warning .................................................................................................................................................. 20

1. Information Security Risks ......................................................................................................................... 20

2. Security Measures – e.g. ............................................................................................................................. 20

Set the Computer Network ........................................... 21

1. Connect With a PC .............................................................................................................................................. 22

2. Set the Computer Network .............................................................................................................................. 23

1. Computer Network Setting Procedure (for Windows 10) ............................................................. 23

3. Check Communication ...................................................................................................................................... 26

CONPROSYS WEB Setting ............................................. 27

1. CONPROSYS WEB Setting Outline ................................................................................................................ 28

1. Compatible Web Browser .......................................................................................................................... 28

2. Start Up CONPROSYS WEB Setting ........................................................................................................ 28

3. CONPROSYS WEB Setting Basic Operation ........................................................................................ 29

2. Menu Function List .............................................................................................................................................. 31

3. Function Details .................................................................................................................................................... 33

1. Wired LAN ........................................................................................................................................................ 33

2. Wireless LAN ................................................................................................................................................... 35

3. 3G ........................................................................................................................................................................ 38

4. LTE ....................................................................................................................................................................... 41

5. Proxy................................................................................................................................................................... 44

6. Router Function ............................................................................................................................................. 45

7. IP Filter ............................................................................................................................................................... 52

8. Device ................................................................................................................................................................ 56

9. Data Transfer ................................................................................................................................................... 60

10. Azure IoT Hub................................................................................................................................................. 65

11. Time .................................................................................................................................................................... 66

12. Service ............................................................................................................................................................... 68

— 3 —

Table of Contents

13. Mail ..................................................................................................................................................................... 71

14. SMS ..................................................................................................................................................................... 74

15. OPC UA.............................................................................................................................................................. 76

16. MTConnect ...................................................................................................................................................... 78

17. FTP....................................................................................................................................................................... 79

18. PLC (Link config) ............................................................................................................................................ 82

19. PLC (CPU config) ............................................................................................................................................ 86

20. PLC (DEVICE config) ..................................................................................................................................... 88

21. MQTT Connection ......................................................................................................................................... 92

22. MQTT Publish ................................................................................................................................................. 97

23. MQTT Subscribe ..........................................................................................................................................104

24. BACnet .............................................................................................................................................................109

25. System .............................................................................................................................................................117

26. Modbus Data View .....................................................................................................................................119

27. File View ..........................................................................................................................................................122

28. Log ....................................................................................................................................................................124

29. Firmware Update .........................................................................................................................................125

30. Configuration File........................................................................................................................................126

31. User/Password ..............................................................................................................................................127

32. Network ..........................................................................................................................................................130

33. User's Restrictions .......................................................................................................................................131

34. Monitoring Edit ............................................................................................................................................132

35. Monitoring View ..........................................................................................................................................133

36. Task Edit ..........................................................................................................................................................134

37. Tag Edit ............................................................................................................................................................135

38. Save and Reboot .........................................................................................................................................136

39. Save and Shutdown ...................................................................................................................................136

40. Save ..................................................................................................................................................................136

41. Reboot .............................................................................................................................................................137

42. Shutdown .......................................................................................................................................................137

43. Forced Reboot ..............................................................................................................................................137

44. Repair SD and Reboot ...............................................................................................................................138

Easy Data Process and Control ................................... 139

1. CONPROSYS VTC Outline ...............................................................................................................................140

1. What You Can Do With CONPROSYS VTC ........................................................................................140

2. Work Area ......................................................................................................................................................141

3. Create Processing Tasks ............................................................................................................................141

4. Basic Procedure for Creating Processing Tasks ...............................................................................142

5. Internal Variables .........................................................................................................................................145

2. Summary Of Available Controls ...................................................................................................................146

3. Input/Output Module Allocation ................................................................................................................151

4. Sample ...................................................................................................................................................................152

5. 1. Sample (1) .....................................................................................................................................................153

2. Sample (2) ......................................................................................................................................................155

3. Sample (3) ......................................................................................................................................................158

4. Sample (4) ......................................................................................................................................................161

5. Sample (5) ......................................................................................................................................................163

6. Sample (6) ......................................................................................................................................................165

— 4 —

Table of Contents

7. Sample (7) ......................................................................................................................................................169

8. Sample (8) ......................................................................................................................................................174

9. Sample (9) ......................................................................................................................................................179

10. Sample (10) ................................................................................................................................................182

11. Sample (11) ................................................................................................................................................184

12. Sample (12) ................................................................................................................................................187

Monitoring Edit ............................................................ 189

1. CONPROSYS HMI Outline ..............................................................................................................................190

1. What You Can Do With CONPROSYS HMI ........................................................................................190

2. HMI Editor Work Areas .............................................................................................................................191

3. Create a Monitoring Screen ....................................................................................................................191

4. Basic Procedure for Creating a Monitoring Screen .......................................................................192

2. Summary of Available Controls ....................................................................................................................196

3. Internal Variables Specification ....................................................................................................................198

4. Sample ...................................................................................................................................................................199

1. Sample of Input / Output Monitoring Screen. ................................................................................199

Tag Edit ......................................................................... 202

1. Overview of Tag Edit .........................................................................................................................................203

1. Tag Edit Page .................................................................................................................................................203

2. TAG Export/Import ......................................................................................................................................207

Collecting Information From PLC ............................... 210

1. Display System Setting Page .........................................................................................................................211

2. PLC Link Configuration ....................................................................................................................................214

3. PLC CPU Configuration ....................................................................................................................................216

4. PLC Device Configuration ...............................................................................................................................218

Transferring Measured Data to Server ....................... 220

1. Data Transfer Outline .......................................................................................................................................221

2. Settings for Transferring Measured Data. ................................................................................................222

3. Data Transfer Setting ........................................................................................................................................223

1. Data Transfer .................................................................................................................................................223

2. Service .............................................................................................................................................................223

3. Time ..................................................................................................................................................................224

4. Network Setting ...........................................................................................................................................225

5. Wireless LAN .................................................................................................................................................226

6. 3G ......................................................................................................................................................................228

7. LTE .....................................................................................................................................................................229

— 5 —

Table of Contents

Using The Product As OPC UA Sever ......................... 230

1. OPC UA Client Preparation and Communication..................................................................................231

1. OPC UA Client Preparation ......................................................................................................................231

2. Communication With OPC UA Client ..................................................................................................231

2. Download OPC UA Sever Certificate ..........................................................................................................233

3. Upload OPC UA Client Certificate ...............................................................................................................235

4. Client Authentication By User ID .................................................................................................................237

5. Communication With CNC by FANUC .......................................................................................................238

6. OPC UA Server Specification .........................................................................................................................239

1. Overall Specification ..................................................................................................................................239

2. Address Space Specification ...................................................................................................................240

Set the Auto Send Mail ................................................ 242

1. SMTP Sever Setting ...........................................................................................................................................243

2. Mail Address Setting ........................................................................................................................................245

3. Send Mail Program ...........................................................................................................................................246

Connecting to Azure IoT Hub ..................................... 247

1. Azure IoT Hub Communication Functions ...............................................................................................248

1. Azure IoT Hub Communication Specification ..................................................................................248

2. Azure IoT Hub Preparation ............................................................................................................................249

1. Create a Microsoft Azure Account .......................................................................................................249

2. Create an Azure IoT Hub ..........................................................................................................................249

3. Obtain a Device Connection String ......................................................................................................252

3. Azure IoT Hub Setting .....................................................................................................................................255

4. Send Azure IoT Task ..........................................................................................................................................256

1. Sending Format ...........................................................................................................................................256

2. Set a Task ........................................................................................................................................................258

3. Check Sending .............................................................................................................................................261

4. Check Log .......................................................................................................................................................262

5. Check Resending File .................................................................................................................................262

6. Receiving Format .........................................................................................................................................262

7. Check Receiving ...........................................................................................................................................263

MTConnect ................................................................... 264

1. MTConnect Outline ...........................................................................................................................................265

1. MTConnect Overall Specification ..........................................................................................................265

2. MTConnect DataItem Specification .....................................................................................................266

3. An Example Of MTConnect Client Display ........................................................................................267

FTP Communication .................................................... 268

1. FTP Communication Function.......................................................................................................................269

— 6 —

Table of Contents

2. FTP Server Settings ...........................................................................................................................................270

3. File Sending/Receiving Program .................................................................................................................271

MQTT Publish And Subscribe ..................................... 273

1. MQTT Outline ......................................................................................................................................................274

2. Required Settings For MQTT Publish And Subscribe ..........................................................................275

3. MQTT Connection .............................................................................................................................................276

4. Examples for MQTT Publish and Subscribe .............................................................................................278

1. Publish (1) ......................................................................................................................................................279

2. Publish (2) ......................................................................................................................................................281

3. Publish (3) ......................................................................................................................................................283

4. Publish (4) ......................................................................................................................................................285

5. Publish (5) ......................................................................................................................................................288

6. Publish (6) ......................................................................................................................................................289

7. Publish (7) ......................................................................................................................................................290

8. Publish (8) ......................................................................................................................................................292

9. Subscribe (1) .................................................................................................................................................293

10. Subscribe (2) .................................................................................................................................................295

11. Subscribe (3) .................................................................................................................................................297

12. Subscribe (4) .................................................................................................................................................298

13. Subscribe (5) .................................................................................................................................................299

14. Subscribe (6) .................................................................................................................................................301

5. Examples for MQTT Application ..................................................................................................................302

1. Connection (1) ..............................................................................................................................................303

2. Connection (2) ..............................................................................................................................................304

3. Other (1)..........................................................................................................................................................306

BACnet .......................................................................... 307

1. BACnet Basic Information ...............................................................................................................................308

2. BACnet Server Function ..................................................................................................................................309

1. BACnet Object ..............................................................................................................................................309

2. Link with PLC communication ................................................................................................................316

3. BACnet Client Function ...................................................................................................................................318

4. Glossary .................................................................................................................................................................319

Router Function ........................................................... 320

1. Router Function Outline ..................................................................................................................................321

2. Router Function Setting ..................................................................................................................................322

1. DHCP Server ..................................................................................................................................................323

2. Static Routing ...............................................................................................................................................324

3. Port Forwarding ...........................................................................................................................................326

4. IP Filter .............................................................................................................................................................328

— 7 —

Table of Contents

Set Up Troubleshooting .............................................. 332

1. If You Encounter a Problem? .........................................................................................................................333

1. General ............................................................................................................................................................333

2. Data Transfer To The Server Problems ................................................................................................335

3. Monitoring Screen Creation And Display Problems .....................................................................335

4. Processing Task Creation And Display Problems ............................................................................335

Appendix ...................................................................... 336

1. Data Transfer Format ........................................................................................................................................337

2. F&eIT Protocol Specifications .......................................................................................................................341

1. Communications Sever Concept ...........................................................................................................341

2. Basic Specifications ....................................................................................................................................342

3. Control Information ...................................................................................................................................349

3. SD Card ..................................................................................................................................................................351

4. DIP Switch .............................................................................................................................................................352

5. LED ...........................................................................................................................................................................353

6. Modbus Status Information ...........................................................................................................................354

7. COM Setting ........................................................................................................................................................362

8. MQTT Publish And Subscribe Data Format .............................................................................................363

1. MQTT Publish Data Format .....................................................................................................................363

2. MQTT Resend File Format .......................................................................................................................365

3. MQTT Subscribe Data Format ................................................................................................................366

9. MQTT Communication Log ...........................................................................................................................368

1. COMMUNICATION LOG ...........................................................................................................................368

2. PUBLISH LOG ................................................................................................................................................369

3. SUBSCRIBE LOG ...........................................................................................................................................370

10. SMS Send Log .....................................................................................................................................................371

11. Industrial Value Conversion ...........................................................................................................................372

Setting Example 1 : Measurement Value ..................................................................................................372

Setting Example 2 : Current Value ...............................................................................................................374

Setting Example 3 : Connection With a Pyranometer of DC4-20mA Outputs ..........................376

Customer Support and Inquiry ................................... 378

1. Services ..................................................................................................................................................................379

Index ............................................................................. 380

— 8 —

Introduction

This section provides necessary information of the

product such as the product configuration and manuals

before actual use.

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 9 —

1. Product Outline

Add M2M Gateway series to your current facilities where devices are controlled by PLC, and data

from the devices can be collected and linked with IoT system such as Cloud service.

The controller features the capability of collecting data from several PLCs from various makers.

1. An Example Of System Composition

* Even several different device types from various makers are used, and with multiple interfaces and

communication protocols, the M2M Gateway series can collect data, monitor facilities, and

accumulate data of operations.

Brand A PLCs

Internet

(VPN)

Cloud Data Service

Brand B PLCs

RS-485

Ethernet

Brand C PLCs

M2M Ga teway

series

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 10 —

2. Gateway Series Function

Support multi-vendor

 Data can be collected from several PLCs from various models or makers including Mitsubishi and

OMRON, and even in the environment where there are several interfaces and communication

protocols.

Collect data by easy setting

 With simple configurations, data can be collected from multiple PLCs from various makers or

models.

 With easy settings, information can be sent to cloud.

Monitor PLC device memory

 The setting values and control results can be read and monitored from PLC device memory.

Remote-monitor facilities through cloud

 The setting values and control results can be collected all at once.

 Facilities in a remote location or overseas can be monitored.

 Performances of devices can be accumulated.

Collect data on-premises

 Data can be summarized easily with data collecting software for Windows PC provided free of

charge.

 Collected data can be used with Modbus/TCP communication supported SCADA

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 11 —

Link Up to 10 Systems and 256 Register Groups

 Connect up to 10 PLCs using an Ethernet connection or up to 128 PLCs using a serial connection.

Connect up to 256 register groups, gather up to 10000 data.

 In case of computer links, the number of devices that can communicate is limited by hardware

specifications.

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 12 —

2. Manual Composition

This manual is composed as follows:

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 13 —

3. Procedure Until Ready To Use

The followings show the standard procedure until the product is ready to use.

Connect with a PC

Refer to

page 22

Set up the network of PC

Refer to

page 23

Set up with CONPROSYS WEB Setting

Refer to

page 28

Set Username and Password

Refer to

page 127

Save the settings

Refer to

page 135

Set up the product

Refer to Reference

Manual

(Hardware)

*This procedure can be different depending on the user's environment or system types.

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 14 —

4. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read The Following Manuals.

Name

When to Read

Contents

How to Get

Product Guide

Must read this after

opening the package.

This lists the product

configuration and

describes the precautions.

Included in the package

(Printed matter)

Setup Manual

Read this when setting up

the product.

This describes the required

items for setup and

configuration procedure.

Download from

the Contec

website (PDF)

Reference Manual

(Hardware)

Read this when operating

the product.

This describes the

hardware aspects such as

functions and settings.

Download from

the Contec

website (PDF)

Reference Manual

(Software)

Read this when setting up

the “CONPROSYS WEB

Setting”.

This describes how to set

each function of

“CONPROSYS WEB

Setting”.

Download from

the Contec

website (PDF)

 Read The Following Manuals As Necessary.

Name

When to Read

Contents

How to Get

CONPROSYS Cloud Data

Service 2 (CDS2) Manual

Read this to understand

the outline of the

CONPROSYS Cloud

Data Service 2.

This describes the outline

and specification of the

CONPROSYS Cloud Data

Service 2 as well as how to

operate the product.

Download from

the Contec

website (PDF)

CONPROSYS Cloud Data

Service 2 Concise Manual

Read this when using

the CONPROSYS Cloud

Data Service 2.

This describes the procedure

to start monitoring

measured data in Cloud Data

Service 2.

Download from

the Contec

website (PDF)

 Download Manuals

Download the manuals from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 15 —

5. Online Help

We offer the detailed information on “CONPROSYS VTC” for assembling processing tasks such as

calculation and control as well as on “CONPROSYS HMI” for operating and editing the monitoring

screen through the Online Help.

Consult the Online Help as necessary.

 CONPROSYS VTC (Visual Task Control).

Online Help

https://doc.conprosys.com/help/task/V1/en/

 CONPROSYS HMI (Human Machine Interface)

Online Help

https://doc.conprosys.com/help/hmi/V1/en/

—

Introduction

—

M2M Gateway Series, Reference Manual (Software)

— 16 —

6. Check The Firmware Version

Before running the product, visit our website to check the firmware version and update to the latest

one if necessary.

Updating firmware to the latest version will resolve troubles and stabilize the operation.

Download

https://www.contec.com/download/

* Refer to the “Firmware Update (page 125)” for further details.

— 17 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely. Never fail to read them before

using the product.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 18 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

Signal word used to indicate an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in minor or moderate injury.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 19 —

2. Handling Precautions

CAUTION

 The specifications of the product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

in the CONTEC’s website and understand the contents.

 Do not modify the software.

CONTEC will bear no responsibility for any problems, etc., resulting from modifying the

software.

 Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that

may appear in this document or for results obtained by the user as a result of using the

software.

—

Safety Precautions

—

M2M Gateway Series, Reference Manual (Software)

— 20 —

3. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information Security Risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security Measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

Page is loading ...

Contec CPS-MG341-ADSC1-931 Reference guide

This manual is also suitable for

Contec CPS-MG341-ADSC1-931 Reference guide

Related papers

Other documents