The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0870
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0870 10" 2 HP PORTABLE TABLE SAW WITH
ROLLER STAND
Product Dimensions:
Weight................................................................................................................................................................ 96 lbs.
Width (side-to-side) x Depth (front-to-back) x Height...............................................................41-1/2 x 37-1/2 x 41 in.
Footprint (Length x Width)............................................................................................................................35 x 33 in.
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 106 lbs.
Length x Width x Height....................................................................................................................... 31 x 30 x 24 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement........................................................................................................... 120V, Single-Phase, 60 Hz
Full-Load Current Rating........................................................................................................................................ 15A
Minimum Circuit Size..............................................................................................................................................20A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.................................................................................................................................................6 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included..........................................................................................................................................................Yes
Included Plug Type................................................................................................................................................ 1-15
Switch Type................................................................................................................................ ON/OFF Push-Button
Motors:
Main
Horsepower................................................................................................................................................ 2 HP
Phase............................................................................................................................................ Single-Phase
Amps............................................................................................................................................................ 15A
Speed............................................................................................................................................. 20,000 RPM
Type.....................................................................................................................................................Universal
Power Transfer .................................................................................................................................... Gearbox
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Main Information
Table Saw Type.................................................................................................................................... Portable
Maximum Blade Diameter......................................................................................................................... 10 in.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed....................................................................................................................... 2,000 to 4,000 RPM
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt Direction....................................................................................................................................... Left
Max Blade Tilt........................................................................................................................................ 45 Deg.
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.
Maximum Depth of Cut At 45 Degrees.................................................................................................. 2-1/4 in.
Max Rip Right of Blade w/Included Fence & Rails..................................................... 28-1/2 in. w/4" Table Ext.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0870
Additional Blade Information
Included Blade Information..................................................................................................................10" x 40T
Riving Knife/Spreader Thickness..........................................................................................................0.091 in.
Required Blade Body Thickness...........................................................................................................0.079 in.
Required Blade Kerf Thickness............................................................................................................ 0.118 in.
Rim Speed at Max Blade Diameter.................................................................................................10,500 FPM
Table Information
Floor to Table Height................................................................................................................................. 34 in.
Table Size with Extension Wings Width.............................................................................................. 26-3/8 in.
Table Size with Extension Wings Depth.............................................................................................. 22-1/4 in.
Distance Front of Table to Center of Blade......................................................................................... 12-1/4 in.
Distance Front of Table to Blade At Maximum Cut............................................................................... 7-1/2 in.
Main Table Size Thickness....................................................................................................................1-1/2 in.
Fence Information
Fence Type.........................................................................................................................................Aluminum
Fence Size Length...............................................................................................................................25-3/4 in.
Fence Size Width.........................................................................................................................................1 in.
Fence Size Height................................................................................................................................. 2-3/8 in.
Fence Rail Type................................................................................................................................. Aluminum
Fence Rail Length............................................................................................................................... 26-3/8 in.
Fence Rail Width................................................................................................................................... 1-1/2 in.
Fence Rail Height.................................................................................................................................. 1-1/4 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width.....................................................................................................................3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table...................................................................................................................................................Aluminum
Cabinet................................................................................................................................Steel Tube w/Cover
Trunnions............................................................................................................................................Aluminum
Rails....................................................................................................................................................Aluminum
Miter Gauge Construction..............................................................................Sheet Metal Body, Aluminum Bar
Guard............................................................................................................................. Steel and Clear Plastic
Arbor Bearings.............................................................................................. Sealed & Permanently Lubricated
Other Related Information
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size........................................................................................................................................2-1/2 in.
Other Specifications:
Country of Origin .............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................15 Minutes
Serial Number Location ................................................................................................................... Machine ID Label
Sound Rating ..................................................................................................................................................... 92 dB
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................... Yes
Features:
Built-In Stand Offers Easy Portability and Quick Setup at Job Sites
Only 7 Handwheel Turns for Min. to Max. Blade Elevation
4" Outfeed Extension Support
Quick-Release Blade Guard and Riving Knife
Die-Cast Aluminum Table Insert
Flip-Down Fence for Small/Thin Workpieces
/
