9
Control panel
SSeettttiinngg mmooddee
Always remember that when:
- setting the water softener,
- activating/deactivating the audible signals,
- activating/deactivating the rinse aid dispenser
the appliance
MMUUSSTT
be in setting mode:
● Press On/Off button,
AALLLL
programme button lights are illuminated =
appliance in setting mode.
● Press On/Off button,
OONNLLYY
a programme button light is illuminated = last
performed or selected programme still set.
In this case, to return to setting mode, the programme has to be cancelled.
TToo ccaanncceell aa sseett pprrooggrraammmmee oorr aa pprrooggrraammmmee iinn pprrooggrreessss
Simultaneously press and hold the two programme buttons positioned over the
word
RREESSEETT
, until all the programme button lights will illuminate. The
programme has been cancelled and the machine is now in setting mode.
AAuuddiibbllee ssiiggnnaallss
Audible signals have been introduced to help indicate which operations the
dishwasher is performing:
- end of programme
- intervention of an alarm due to malfunction
It is possible to deactvate the audible signals, using some of the programme
buttons on the control panel.
Factory setting: audible signals activated.
Deactivation/activation of the audible signals
11..
Press the On/Off button. The dishwasher must be in setting mode.
22..
Press simultaneously and keep pressed buttons
AA
and
B
B
until the lights of the
buttons
AA
,
BB
and
CC
start flashing.
33..
Press button
CC
, the lights of buttons
AA
and
BB
turn off while the light of button
CC
goes on flashing. The digital display indicates the current setting.
44
To change the current setting, press again button
CC
, the digital display will
indicate the new setting.
55
To memorise the operation, switch off the dishwasher by pressing the On/Off
button.
Audible signals deactivated
Audible signals activated (factory set)