Klimaire KSIL024H219 Quick start guide

Category
Split-system air conditioners
Type
Quick start guide

This manual is also suitable for

ULTIMATE COOLING & HEATING SOLUTION
SERIES
L
TECHNOLOGY
How you ike it
When you ike it
Where you ike it
l
l
l
Feel the difference!
Experience the real Comfort
C US
We have been in Ductless mini-split business since 1989 and at Klimaire maintain the highest quality and reliability with
ISO 9001 and ISO 14001 standards in our manufacturing facilities. Our products have proven their endurance and
resiliency over time operating in 70 different countries since then. All products are ETL certified and AHRI registered.
Klimaire products exceed industry standards for energy efficiency and employs innovative technology to achieve the
highest customer satisfaction. Since our goal is to achieve maximum customer satisfaction, we continuously seek to
achieve in the design phase of our future units higher performance levels.
Ductless mini-split system are one of the fastest growing products in the US and popularity is rapidly increasing.
They allow air conditioning and heating systems to be added quickly, economically and conveniently.
Often for some applications where installing comfort systems didn't seem possible or practical.
Flexibility is the main role of their popularity.
Klimaire ductless systems are simple, reliable, and easy to install as well as affordable. Klimaire slim single zone and
multi zone ductless systems offer built-in solution with duct free technology benefits. These systems are integrated
with innovative inverter technology providing individual comfort and control. We are committed to bring you real
comfort with our series to our valuable customers where you ike it, when you ike it and how you ike it.
Experience the true individual comfort.
Ductless mini-split systems are perfect solution to variety of installation challenges, allowing installers the ability to
place Ductless mini-split units in locations that were previously impractical or impossible. They are ideal when
additional ductwork is necessary but not cost effectively. Basically Ductless mini-split units eliminate the use of
ductwork. Since they consist of two parts, the outdoor portion and the indoor portion similar to regular split units but
smaller in size, they are known as Ductless mini-split systems. The two units are connected to each other by means of
refrigerant and electrical lines. They run together with condensate drain line through a small hole in an exterior wall
generally 3 inch in diameter or less.
In addition to eliminating the need for ducting, one of the other great advantages of ductless mini-split systems is true
zone control. The indoor fan coil unit is dedicated to the room being conditioned allowing a temperature and humidity
level to be kept different from the rest of the house or the building.
L L L L
Ductless Mini-Split
What Klimaire brings you . . .
Inverter Technology:
DC Inverter is a type of power conversion circuit that electronically regulates the voltage, current and frequency of a
compressor or a motor. DC INVERTER-driven air conditioners and heat pumps bear special double cam, twin rotary variable
speed compressor. Like a cruise control of a vehicle. Inverter technology varies the compressor speed based on cooling and
heating needs in the space. Variable speed enables to precisely match system capacity to actual load. They can slow down or
speed up based on demand load. By varying the speed of the compressor systems are able to better match load in heating
and cooling. Therefore systems operate more efficiently at light load, while still being capable of increasing the speed to
deliver full capacity when needed.
Since Humidity is a major factor for comfort, in the summer, Klimaire DC INVERTER – driven variable speed compressors
reduces capacity to match lighter loads increasing the run time to remove moisture and reduce relative humidity resulting in
improved comfort. In the winter, by increasing the speed of the compressor Klimaire air conditioner and heat pump systems
are able to maintain capacity and deliver hotter supply air even at low outdoor ambient conditions .
SERIES
L
Klimaire Invertech DC inverter -driven air conditioners and heat pumps are the ultimate cooling and heating technology of the
HVAC field. Klimaire DC Inverter Technology adopts the new advanced 180 Sine Wave DC inverter Driven Technology and
brushless DC (BLDC) motor (Variable Revolution) Twin cam compressor. This translates into more energy-savings and quieter
operation than 120 Square- Wave DC inverter types. Result is more consistent temperature which translates into increased
comfort and energy savings all year round.
Advanced Klimaire 180 Degrees Inverter Technology
Room temperature 77ºF
Humidity 50%
COMFORTABLE
Decreasing humidity while
maintaining the temperature
increases comfort
Room temperature 77ºF
Humidity 80%
UNCOMFORTABLE
Hot and stuffy with high
humidity
Heating
Cooling
Water Heating
Appliances
(includes refrigerator, dishwasher,
clothes washer and dryer)
Lighting
Electronics
(includes computer and monitor
and TV and DVD player)
Other*
(includes external power adapters,
telephony, set-top boxes, ceiling fans,
vent fans and home audio)
29%
17%
14%
13%
12%
4%
11%
The US Department of Energy (DOE) says that as much as half of the energy used in your home goes to heating and cooling.
So making smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system can have a big effect
on your utility bills and your comfort.
Klimaire DC Inverter - driven ductless air conditioners and heat pumps can save you up to 33% in your power
utility bill when compare with room air conditioners or standard efficiency 10 SEER ductless systems. Even up to 30% energy
consumption savings can be achieved when ductless Invertech units are practical to install and preferred over traditional
ducted central units. Total savings can reach up to 60% when the two options are combined.
Be the One… to make the Smart Choice
A high performance double
cam twin rotary compressor
increases the performance,
reliability, and durability.
Energy savings are much
higher with this INVERTECH
DC INVERTER - driven
variable speed compressor.
The opposite double blade
advanced design provides
mechanical stability and less
vibration that shall increase
the life of compressor and
other components in the
outdoor unit.
Homeowners and neighbors
enjoy quiet whisper breeze
outdoor unit operation making
sure nobody is disturbed.
Eccentric
Load
The temperature fluctuations are much higher in traditional
(on/off cycling) systems compared to invertech driven
inverter systems, which effects human comfort.
Real comfort does not only depend on temperature.
Dehumidification process, especially during hot sticky
weather is essential and integral part of cooling and
inverter systems are the more efficient way to remove
moisture and control humidity level.
Savings and advantages are even much more when you
compare with traditional systems. They run at fixed speed
and cycle on/off to match the load. This will result
compressor to draw tremendous energy each time when it
starts up. On/off cycling also reduces the life-span of the
compressor and other components that cycle on/off.
1-Wider frequency & voltage range
2-More Efficient & higher savings
3-Lower noise & reduced vibration for longer life
4-Improved reliable operation
Time
Room Temperature
Setting
Temp.
T1
Too HotToo Hot
Too Cold
T2 < T1
Room
temperature cool
down to setting
temperature in
shorter time
T2
Comfortable
Fixed Speed System
DC Inverter System
Time
Power Consumption
(Current)
Fixed Speed System
DC Inverter System
DC Inverter 180 Sine Wave
Temperature Fluctuation
- INVERTECH System vs. On/off System
Weakest
Sound
Heard
Jet Engine
at 100’
Whisper
Quiet
Library
Normal
Conversation
from 3 - 5’
Power
Tools
140
105
70
35
0
dB(A) Level
Klimaire
KSIL Unit
Noise Level
Like regular split air conditioning or
heat pump systems, the condensing
unit is installed outdoors allowing a
peaceful and more comfortable
interior environment.
Ductless Mini-split – A Real Solution
Ductless mini-split systems are a real cost efficient,
flexible, quiet and attractive solution to provide a
smart, peaceful alternative to both window and
central air conditioners, for locations where no duct
is available, in residential, offices, or commercial
buildings, new or existing, and additions.
Flexible and Quiet
Remote Control
Fan
Speed
Setting
HIGH
/ MED / LOW
/
FAN
Timer Off
Turbo
Temperature
Setting
Lock
Pinhole
Reset
Pinhole
Sleep
Air
Direction
Swing
Mode
Setting
SERIES
L
ON / OFF
AUTO / COOL
/ DRY / HEAT
LED
Display
Timer On
Swing - Distributes cool/warm air to a maximum area by
moving flaps automatically.
Sleep - Enables the air conditioner to automatically increase
(cooling) or decrease (heating) 1.8 ºF / hour for the first two
hours, then keep it steady for the next 5 hours, after that will
turn off. This function maintains both energy savings and
comfort in night operation.
Air Direction - Due to density of cold and warm air is different,
in cooling mode indoor unit blows air horizontally, while in
heating mode blows it vertically, to make room temperature
more consistent and comfortable during the operation.
Timer - The timer can be set to start ON and stop OFF at any
point in a 24 hour operation
Turbo - The air conditioner will maximize the output of cooling
or heating operation, make the room cool down or heat up
rapidly, and attain the desired temperature in the shortest time
TEMP - Sets the room temperature up or down 1º F at a time.
Applications are endless...
Smart Heating & Cooling
It is highly recomendable to replace your inefficient old room air conditioner
with quieter, more efficient, super high efficiency ductless mini split System.
Indoor Climate Changer
Indoor nurseries & plant growers can easily achieve the desired temperature
and control hummidity levels in different zones.
Individual Comfort & Temperature Control
Condition the storage
Heating and cooling your garage helps to maintain
low humidity and prevents mildew and keep reasonable
winter temperatures. Your stored goods are
in perfect conditions for years.
Auxiliary Cooling
When additional cooling is on demand, ductless mini split systems
can be added quickly, conveniently and economically.
Ductless Mini-splits have flexibility to fit virtually any applications
Create your own true zone cooling & heating to achieve more precise individual
comfort day and night in your home or business. Klimaire units zoning capability
allows you to set each zone with different temperature settings as desired.
You can even turn off the units in non-occupied rooms for additional energy savings,
while you can keep them at a higher temperature setting in cooling to control
humidity levels – increasing personal comfort.
Homes utilizes hydronic heat
Remote Utility transfer stations
Residential additions such as a Florida room,
sun room, bed room or garage conversions
Restaurants, Barber shops
Computer rooms (different temperature/
humidity control is required)
Historic homes
Vacation homes or cabins
ATMs and photo studios
Remote offices such as inside
a warehouse factory
Class rooms, indoor nurseries
Shopping malls
Nursing homes, hospitals & church
sanctuaries
Arena sky boxes
EZ Supplemental Capacity
In most cases it is impractical and inconvenient to utilize existing central system and
duct work for your home addition projects. Klimaire Inverter units can be easily add on
as a supplemental cooling and heating capacity for your home additions. Homeowners
enjoy zone comfort control eliminating messy duct work installation and tampering
with it, that may result in inefficient air distribution.
74
68
69
70
71
73
SERIES
L
Advantages of Ductless Mini-split System
Ultra High Efficiency –Units are designed up to 19 SEER (seasonal energy efficiency ratio) and 9.6
HSPF (heating seasonal performance factor) ratings that exceed government standards.
Klimaire's INVERTECH advanced inverter technology makes it possible to save energy four seasons all
year around for cooling and heating. Since these units are directly serves area being conditioned with
duct free design technology that eliminates lengthy air travels and air leakage in duct. I
For a homeowner this translates into lower utility bills.
f the ducts are
not sealed tight or in an unconditioned space such as an attic or crawler space the losses can easily be
more than 30% of energy consumption.
Sleek Design-
Easy installation
High wall models, a low profile indoor unit in natural off-white
color to blend with any décor in home and /or in business.
It is simple to install Klimaire indoor units like hanging a
picture frame on the wall. All you need is to make a small hole not larger than 3
inches in diameter into an exterior wall and run the refrigerant lines and
electrical wires to be connected to your outdoor unit. Factory installed
condensate drain line should run through the same hole as well. Most of the
cases this hole is made on an exterior wall. Since there is a single electric power
entry connected to the outdoor unit only, it requires much less labor and
reduces installation time. Optional outdoor unit wall brackets are contractors
preferred solution to expedite installation process for upper floor installations.
Burglar free – On the contrary of a window air
conditioner, with ductless air conditioners systems there
are no wall openings so that access cannot be gained.
Experience the true individual comfort
SERIES
L
Energy Savings
Quieter operation
Comfort
Powerful
Convenient
Environmentally Friendly
– Reduction of up to 60% in energy consumption can be achieved in comparison to 10 SEER units,
which will reduce the utility bill.
– It is less noisy than a self contained window unit, or a packaged terminal unit (PTAC / PTHP),
or a central unit. A ductless split system is ultra-quiet because it does not have to push conditioned air through many
feet of ductwork, and the nosier outdoor portion of the system operates outdoors.
– A true zone temperature control optimizes your comfort. Even a single-zone or a multi-zone Klimaire
INVERTECH advanced DC Inverter technology provides maximum comfort for the entire space by individual
temperature and humidity control. By utilizing inverter technology, temperature and humidity fluctuations are
minimized, this state-of-the-art electronic climate control also changes the louver direction swings air, to create
uniform ambient conditions. When the selected temperature is reached an inverter system runs almost constantly at
low economy speed to maintain desired comfort level controlling humidity which is considered vital for comfort.
– By means of a microprocessor Inverter Technology senses the indoor air temperature of the space being
cooled or heated and adjusts the speed of the compressor to run at higher speed to meet the demand and quickly
reach the set temperature, then slows down to lower rotation speed to maintain it.
– Excellent for remodeling older homes, convenient for retrofitting, vacation homes, cabins, classrooms,
churches, nursing homes, restaurants, computer rooms, sun rooms, ATMs, office lobbies and remote offices.
– Our units use environmentally
friendly R-410A refrigerant designed to prevent the depletion
of the ozone layer. Our super high efficiency products contribute
to reduce fossil fuel consumption and limit air pollution.
SERIES
L
Turbo mode –
Sleep mode –
Auto-restart & memory function –
Dry mode –
Auto level swing –
To bring the room quickly to the
desired temperature the air conditioner
maximizes the cooling or heating output
capacity by operating the fan at very high
speed to attain the set temperature in the
shortest time.
On this function the unit
automatically adjusts the temperature setting
by 1.8 ºF per hour for the first two hours, then
holds it steady for the next 5 hours and after
that it switches off for all-night comfort.
If the power
fails no setting will be lost, when the power
resumes, the air conditioner will restart with
the previous function setting automatically
eliminating the need for re-programming.
The individual dehumidification
mode efficiently helps to control humidity level
when cooling may not be necessary.
Distributes cool/warm air to
a maximum area by moving flaps automatically.
Comfort
Features
Respected for its reliability
Desired for its all season performance
Air direction –
Low ambient operation –
Anti-cold Air –
Adjustable indoor fan control –
Since cold air and warm air
density is different, in cooling mode the indoor
unit blows air horizontally while vertically in
heating mode. This technology makes the room
temperature more consistent and comfortable
during operation.
Units can operate
down to 5 ºF in heating mode.
(Heat pump only) When starting
the heating operation, the fan speed is
automatically regulated from the lowest level
to the pre-set level according to the
temperature rising of the evaporator.
This function prevents cold air blowing out at
the beginning of the operation, avoiding
discomfort to the user.
Changes the
fan speed to 3 different settings to
accommodate user's needs. It also helps to
control humidity level when cooling may not be
necessary.
TECHNOLOGY
SERIES
L
K
S
I
L
018
-
H
2
19
Efficiency
SEER
Power Supply
1: 115 / 1 / 60
2 : 208-230 / 1 / 60
Operational Information
C: Cooling Only
H: Heat Pump
Nominal Capacity (kBtu/h)
Product Series
Unit Type
I : Inverter
Model
S: System
Brand
K: Klimaire
PRODUCT CODE:
NOMENCLATURE
KSIL Single Zone 16 SEER - Heat Pump
GENERAL SPECIFICATIONS
SERIES
L
Performer 16 Series
Dimensions
H
D
L
H
D
L
KSIL030-H216 KSIL036-H215
No No
30.000 36.000
12,650 - 36,150 15,180 -43,370
30.000 36.000
14,100 - 37,800 16,900 - 45,390
6,342 8,033
10 9,5
16 14,5
9,6 9
1600 1600
942 942
50/48/46 50/48/46
59 59
208-230 / 1 / 60 208-230 / 1 / 60
13 16,0
11 16,0
16 20
25 30
3.000 3.800
2.500 3.450
4 4
16 16
1445 x 340 x 277 1445 x 340 x 277
56"-7/8 x 13"-3 /8 x 10"-7 /8 56"-7/8 x 13"-3 /8 x 10"-7 /8
1530 x 365 x 420 1530 x 365 x 420
60"-1/4 x 14"-3/8 x 16"-9/16 60"-1/4 x 14"-3/8 x 16"-9/16
53 / 71 53 / 71
895 × 860 × 330 990 x 965 x 345
35"-1/4 × 33"-1/4 × 13" 39" x 38" x 13"-9/16
1043 x 915 x 395 1120 x 1100 x 435
41"-1/16 × 36" × 15"-9/16 44"-1/8 x 43"-5/16 x 17"-1/8
157 / 165 181 / 190
R-410A R-410A
Flare Flare
Ф9.53(3/8") Ф9.53(3/8")
Ф16(5/8") Ф16(5/8")
550/340 PSIG 550/340 PSIG
82 98
33 49
971 971
1260 / 1090 / 950 1260 / 1090 / 950
5 122/5 93.2 5 122/5 93.2
50/47/43 50/46/42
59 65
1400-1900 1900-2500
Option Option
YES YES
YES YES
YES YES
YES YES
Option Option
Option Option
Option Option
Option Option
Option Option
Option Option
24 24
Klimaire Model No. KSIL009-H216 KSIL012-H216 KSIL018-H216 KSIL024-H216
Energy Star
No No No No
Cooling Capacity Btu/h
9.000 12.000 18.000 23.000
Inverter Cooling Capacity Range
Btu/h 5,000 - 12,800 5,000 - 16,100 5,800 - 22,000 9,700 - 28,300
Heating Capacity Btu/h
10.700 13.000 18.900 23.000
Inverter Heating Capacity Range
Btu/h 5,000 - 13,000 5,000 - 16,500 5,800 - 24,000 10,800 - 29,000
Dehudimification Pts/h 2,114 2,537 3,805 5,285
EER Btu/W.h
12,4 12 12 9,6
SEER Btu/W.h
16 16,6 17 16
HSPF Btu/W.h
9,2 9 8,2 7,8
Indoor Air Flow Volume m3/h 670 880 1150 1150
cfm 395 518 677 677
Indoor Noise Level - Hi/Med/Lo
dB(A) 40/36/30 43/41/39 49/45/42 49/45/42
Outdoor Noise Level
dB(A) 52 54 54 56
Power input V / ph / Hz 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60
Amps (Cool) A 4 5 7 11
Amps (Heat) A 4 5 7 11
Minimum Cicuit Amp. A 8 8 14 15
Max. Overc. Protection A 15 15 20 25
Watts (Cool) W 750 1.000 1.500 2.410
Watts (Heat) W 820 1.020 1.580 2.520
No. of Wires Indoor to Outdoor
4 4 4 4
Wire Size # Indoor to outdoor AWG
16 16 16 16
Indoor Unit Dimensions mm
790 x 265 x 198 920 x 292 x 223
998 x 322 x 240 998 x 322 x 240
(W*H*D) in
31"-1/8 x 10"-7/16 x 7"-13/16 36"-1/4 x 11"-1/2 x 8"-3/4
39"-5/16 x 12"-11 /16 x 9"-7/16 39"-5/16 x 12"-11 /16 x 9"-7/16
Indoor Unit Packing mm
875 x 335 x 265 1015 x 368 x 295
1080 x 320 x 400 1080 x 320 x 400
Dimensions (W*H*D) in
34"-7/8 x 13"-3/16 x 10"-7/16 39"-15/16 x 14"-1/2 x 11"-5/8
42"-1/2 x 12"-5/8 x 15"-3 /4 42"-1/2 x 12"-5/8 x 15"-3/4
Indoor Unit Net/Gross Weight lb
18 / 22 26 / 33 29 / 38 30 / 36
Outdoor Unit Dimensions mm 760 × 590 × 285 760 × 590 × 285 845 × 695 × 335 895 × 860 × 330
(W*H*D) in 29"-15/16 × 23"-1/4 × 11"-1/4 29"-15/16 × 23"-1/4 × 11"-1/4 33"-1/4 × 27"-3/8 × 13"-3/16 33"-1/4 × 27"-3/8 × 13"-3/16
Outdoor Unit Packing mm 887 x 645 x 355 887 x 645 x 355 965 x 755 x 395 965 x 755 x 395
Dimensions (W*H*D) in 34"-15/16 × 25"-13/16 × 14" 34"-15/16 × 25"-13/16 × 14" 38" × 29"-3/4 × 15"-9/16 38" × 29"-3/4 × 15"-9/16
Outdoor Unit Net / Gross Weight lb
84 / 90 88 / 93 110 / 120 109 / 116
Refrigerant Gas Type R-410A R-410A R-410A R-410A
Charge Amount oz / g
Refrigerant connections
Flare Flare Flare Flare
Piping size - Liquid mm (in) Ф6.35(1/4") Ф6.35(1/4") Ф9.53(3/8") Ф9.53(3/8")
Gas mm (in) Ф9.53(3/8") Ф12.7(1/2") Ф16(5/8") Ф16(5/8")
Design Pressure psig
550/340 PSIG 550/340 PSIG 550/340 PSIG 550/340 PSIG
Max. Line Run
1
ft
66 66 82 82
Max. Elevation difference
2
ft
26 26 33 33
Indoor Unit Air Circulation cfm
394 518 676 676
Fan Speeds H / M / L
1200/940/800 1200/940/800 1285 / 1245 / 1040 1285 / 1245 / 1040
Temp. Setting Range
On Remote 62º F - 88º F
Low Ambient Operation
(cooling/heating)
4
ºF
5 122/5 93.2 5 122/5 93.2 5 122/5 93.2 5 122/5 93.2
Noise level indoor (H/M/L) dB(A)
40/36/30 44/41/39 50/45/42 49/45/42
Noise level outdoor dB(A)
55 54 59 60
Applicable Area Sq.Ft.
350-400 450-550 700-1000 1100-1400
Follow me Option Option Option Option
Turbo Mode YES YES YES YES
Anto-restart YES YES YES YES
LCD display YES YES YES YES
Auto level swing YES YES YES YES
Active Carbon Option Option Option Option
Golden Fin Option Option Option Option
Vitamin C Filter Option Option Option Option
Bio Filter Option Option Option Option
Sliver Ion Filter Option Option Option Option
Finger Guard net Option Option Option Option
Timer 24 24 24 24
Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part.
Allways comply with local, state, and national electrical codes.
1 - Minimum 10 ft line set recommended.
2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m)
3 - Factory installed only, not field option
4 - Units may operate in heating mode until the ambient conditions reach 5º F
C US
SERIES
L
KSIL Single Zone 19 SEER - Heat Pump
GENERAL SPECIFICATIONS
Performer 19 Series
Dimensions
H
D
L
H
D
L
C US
Klimaire Model No. KSIL009-H119 KSIL012-H219 KSIL018-H219
Energy Star
YES YES YES
Cooling Capacity Btu/h
9.000 12.000 18.000
Inverter Cooling Capacity Range
Btu/h 5,000 - 12,800 5,000 - 16,100 5,800 - 22,000
Heating Capacity Btu/h
10.000 13.000 19.000
Inverter Heating Capacity Range
Btu/h 5,000 - 13,000 5,000 - 16,500 5,800 - 24,000
Dehudimification Pts/h 2,11 2,54 3,81
EER Btu/W.h
14 12,5 12,5
SEER Btu/W.h
19 18,8 19,2
HSPF Btu/W.h
9,6 9,3 9,6
Indoor Air Flow Volume m3/h 750 850 1150
cfm 440 500 675
Indoor Noise Level - Hi/Med/Lo
dB(A) 39/35/32 41/37/34 48/40/36
Outdoor Noise Level
dB(A) 53 54 54
Power input V / ph / Hz 115 / 1 / 60 230 / 1 / 60 230 / 1 / 60
Amps (Cool) A 6,0 5,0 7
Amps (Heat) A 7 6,0 7
Minimum Cicuit Amp. A 15 8 13
Max. Overc. Protection A 25 15 20
Watts (Cool) W
650 1000 1460
Watts (Heat) W
790 1250 1470
No. of Wires Indoor to Outdoor
4 4 4
Wire Size # Indoor to outdoor AWG
16 16 16
Indoor Unit Dimensions mm
920x292x223
920x292x223 998x322x240
(W*D*H) in
36"-1/4 x 11"-1/2 x 8"-3/4 36"-1/4 x 11"-1/2 x 8"-3/4
39"-5/16 x 12"-11 /16 x 9"-7/16
Indoor Unit Packing mm
1015 x 368 x 295 1015 x 368 x 295
1080x320x400
Dimensions (W*D*H) in
39"-15/16 x 14"-1/2 x 11"-5/8 39"-15/16 x 14"-1/2 x 11"-5/8
42"-1/2 x 12"-5/8 x 15"-3 /4
Indoor Unit Net/Gross Weight lb
26 / 32 26 / 32 29 / 37
Outdoor Unit Dimensions mm 760×590×285 760×590×285 845×695×335
(W*D*H) in 29"-15/16 × 23"- 1/4 × 11"-1/4 29"-15/16 × 23"- 1/4 × 11"-1/4 33"- 1/4 × 27"-3/8 × 13"- 3/16
Outdoor Unit Packing mm 887 × 655 × 355 887 × 655 × 355 965 × 755 × 395
Dimensions (W*D*H) in 34"-15/16 × 25"-13/16 × 14" 34"-15/16 × 25"-13/16 × 14" 38" × 29"-3/4 × 15"-9/16
Outdoor Unit Net / Gross Weight lb
83 / 88 88 / 93 105 / 113
Refrigerant Gas Type R-410A R-410A R-410A
Charge Amount g
1600 1600 1750
Refrigerant connections
Piping size - Liquid mm (in) Ф6.35 (1/4") Ф6.35 (1/4") Ф9.53 (3/8")
Gas mm (in) Ф9.53 (3/8") Ф12.7 (1/2") Ф16 (5/8")
Design Pressure psig
550/340 PSIG 550/340 PSIG 550/340 PSIG
Max. Line Run
1
ft
66 66 82
Max. Elevation difference
2
ft
26 26 33
Indoor Unit Air Circulation m3/h
750 850 1150
cfm
441 500 676
Fan Speeds H / M / L
1150 / 1000 / 850 1200 / 940 / 800 1285 / 1245 / 1040
Temp. Setting Range
On remote 62º F - 88º F
Low Ambient Operation
(cooling/heating)
4
ºF
5122/593.2 5122/593.2 5122/593.2
Noise level indoor (H/M/L) dB(A)
39/35/32 41/37/34 48/44/42
Noise level outdoor dB(A)
53 55 59
Applicable Area Sq.Ft.
350-400 450-550 700-1000
Follow me Option Option Option
Turbo Mode YES YES YES
Anto-restart YES YES YES
LCD display YES YES YES
Auto level swing YES YES YES
Active Carbon Option Option Option
Golden Fin Option Option Option
Vitamin C Filter Option Option Option
Bio Filter Option Option Option
Sliver Ion Filter Option Option Option
Finger Guard net Option Option Option
Timer 24 24 24
KSIL024-H219
YES
24.000
9,700 - 28,300
24.000
10,800 - 29,000
5,50
12,5
18
9,6
1600
940
50/48/46
59
230 / 1 / 60
9,1
9,0
15
25
2100
1980
4
16
1445x340x277
56"-7/8 x 13"-3 /8 x 10"-7 /8
1530x365x420
60"-1/4 x 14"-3/8 x 16"-9/16
58 / 71
895×860×330
35"-1/ 4 × 33"-7/8 × 13"
1043 × 915 × 395
41 "-1/16 × 36" × 15"- 9/16
159 / 168
R-410A
2540
Ф9.53 (3/8")
Ф16 (5/8")
550/340 PSIG
82
33
1600
941
1260 / 1090 / 950
5122/593.2
51/48/45
59
1100-1400
Option
YES
YES
YES
YES
Option
Option
Option
Option
Option
Option
24
Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part.
Allways comply with local, state, and national electrical codes.
1 - Minimum 10 ft line set recommended.
2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m)
3 - Factory installed only, not field option
4 - Units may operate in heating mode until the ambient conditions reach 5º F
TECHNOLOGY
SERIES
L
Tel: (305)594-4972 - Fax (305) 675-2212
www.klimaire.com - [email protected]
2190 NW 89 Place
Doral, FL 33172 – USA
on Parts
1
Year
Warranty
1
on Compressor
5
Year
Warranty
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Klimaire KSIL024H219 Quick start guide

Category
Split-system air conditioners
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI