Klimaire KSIL018H219 Quick start guide

Brand: Klimaire

Model: KSIL018H219

Category: Split-system air conditioners

Type: Quick start guide

This manual is also suitable for

KSIL024H219

ULTIMATE COOLING & HEATING SOLUTION

SERIES

TECHNOLOGY

How you ike it

When you ike it

Where you ike it

Feel the difference!

Experience the real Comfort

C US

We have been in Ductless mini-split business since 1989 and at Klimaire maintain the highest quality and reliability with

ISO 9001 and ISO 14001 standards in our manufacturing facilities. Our products have proven their endurance and

resiliency over time operating in 70 different countries since then. All products are ETL certified and AHRI registered.

Klimaire products exceed industry standards for energy efficiency and employs innovative technology to achieve the

highest customer satisfaction. Since our goal is to achieve maximum customer satisfaction, we continuously seek to

achieve in the design phase of our future units higher performance levels.

Ductless mini-split system are one of the fastest growing products in the US and popularity is rapidly increasing.

They allow air conditioning and heating systems to be added quickly, economically and conveniently.

Often for some applications where installing comfort systems didn't seem possible or practical.

Flexibility is the main role of their popularity.

Klimaire ductless systems are simple, reliable, and easy to install as well as affordable. Klimaire slim single zone and

multi zone ductless systems offer built-in solution with duct free technology benefits. These systems are integrated

with innovative inverter technology providing individual comfort and control. We are committed to bring you real

comfort with our series to our valuable customers where you ike it, when you ike it and how you ike it.

Experience the true individual comfort.

Ductless mini-split systems are perfect solution to variety of installation challenges, allowing installers the ability to

place Ductless mini-split units in locations that were previously impractical or impossible. They are ideal when

additional ductwork is necessary but not cost effectively. Basically Ductless mini-split units eliminate the use of

ductwork. Since they consist of two parts, the outdoor portion and the indoor portion similar to regular split units but

smaller in size, they are known as Ductless mini-split systems. The two units are connected to each other by means of

refrigerant and electrical lines. They run together with condensate drain line through a small hole in an exterior wall

generally 3 inch in diameter or less.

In addition to eliminating the need for ducting, one of the other great advantages of ductless mini-split systems is true

zone control. The indoor fan coil unit is dedicated to the room being conditioned allowing a temperature and humidity

level to be kept different from the rest of the house or the building.

L L L L

Ductless Mini-Split

What Klimaire brings you . . .

Inverter Technology:

DC Inverter is a type of power conversion circuit that electronically regulates the voltage, current and frequency of a

compressor or a motor. DC INVERTER-driven air conditioners and heat pumps bear special double cam, twin rotary variable

speed compressor. Like a cruise control of a vehicle. Inverter technology varies the compressor speed based on cooling and

heating needs in the space. Variable speed enables to precisely match system capacity to actual load. They can slow down or

speed up based on demand load. By varying the speed of the compressor systems are able to better match load in heating

and cooling. Therefore systems operate more efficiently at light load, while still being capable of increasing the speed to

deliver full capacity when needed.

Since Humidity is a major factor for comfort, in the summer, Klimaire DC INVERTER – driven variable speed compressors

reduces capacity to match lighter loads increasing the run time to remove moisture and reduce relative humidity resulting in

improved comfort. In the winter, by increasing the speed of the compressor Klimaire air conditioner and heat pump systems

are able to maintain capacity and deliver hotter supply air even at low outdoor ambient conditions .

SERIES

Klimaire Invertech DC inverter -driven air conditioners and heat pumps are the ultimate cooling and heating technology of the

HVAC field. Klimaire DC Inverter Technology adopts the new advanced 180 Sine Wave DC inverter Driven Technology and

brushless DC (BLDC) motor (Variable Revolution) Twin cam compressor. This translates into more energy-savings and quieter

operation than 120 Square- Wave DC inverter types. Result is more consistent temperature which translates into increased

comfort and energy savings all year round.

Advanced Klimaire 180 Degrees Inverter Technology

Room temperature 77ºF

Humidity 50%

COMFORTABLE

Decreasing humidity while

maintaining the temperature

increases comfort

Room temperature 77ºF

Humidity 80%

UNCOMFORTABLE

Hot and stuffy with high

humidity

Heating

Cooling

Water Heating

Appliances

(includes refrigerator, dishwasher,

clothes washer and dryer)

Lighting

Electronics

(includes computer and monitor

and TV and DVD player)

Other*

(includes external power adapters,

telephony, set-top boxes, ceiling fans,

vent fans and home audio)

29%

17%

14%

13%

12%

11%

The US Department of Energy (DOE) says that as much as half of the energy used in your home goes to heating and cooling.

So making smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system can have a big effect

on your utility bills and your comfort.

Klimaire DC Inverter - driven ductless air conditioners and heat pumps can save you up to 33% in your power

utility bill when compare with room air conditioners or standard efficiency 10 SEER ductless systems. Even up to 30% energy

consumption savings can be achieved when ductless Invertech units are practical to install and preferred over traditional

ducted central units. Total savings can reach up to 60% when the two options are combined.

Be the One… to make the Smart Choice

A high performance double

cam twin rotary compressor

increases the performance,

reliability, and durability.

Energy savings are much

higher with this INVERTECH

DC INVERTER - driven

variable speed compressor.

The opposite double blade

advanced design provides

mechanical stability and less

vibration that shall increase

the life of compressor and

other components in the

outdoor unit.

Homeowners and neighbors

enjoy quiet whisper breeze

outdoor unit operation making

sure nobody is disturbed.

Eccentric

Load

The temperature fluctuations are much higher in traditional

(on/off cycling) systems compared to invertech driven

inverter systems, which effects human comfort.

Real comfort does not only depend on temperature.

Dehumidification process, especially during hot sticky

weather is essential and integral part of cooling and

inverter systems are the more efficient way to remove

moisture and control humidity level.

Savings and advantages are even much more when you

compare with traditional systems. They run at fixed speed

and cycle on/off to match the load. This will result

compressor to draw tremendous energy each time when it

starts up. On/off cycling also reduces the life-span of the

compressor and other components that cycle on/off.

1-Wider frequency & voltage range

2-More Efficient & higher savings

3-Lower noise & reduced vibration for longer life

4-Improved reliable operation

Time

Room Temperature

Setting

Temp.

Too HotToo Hot

Too Cold

T2 < T1

Room

temperature cool

down to setting

temperature in

shorter time

Comfortable

Fixed Speed System

DC Inverter System

Time

Power Consumption

(Current)

Fixed Speed System

DC Inverter System

DC Inverter 180 Sine Wave

Temperature Fluctuation

- INVERTECH System vs. On/off System

Weakest

Sound

Heard

Jet Engine

at 100’

Whisper

Quiet

Library

Normal

Conversation

from 3 - 5’

Power

Tools

140

105

dB(A) Level

Klimaire

KSIL Unit

Noise Level

Like regular split air conditioning or

heat pump systems, the condensing

unit is installed outdoors allowing a

peaceful and more comfortable

interior environment.

Ductless Mini-split – A Real Solution

Ductless mini-split systems are a real cost efficient,

flexible, quiet and attractive solution to provide a

smart, peaceful alternative to both window and

central air conditioners, for locations where no duct

is available, in residential, offices, or commercial

buildings, new or existing, and additions.

Flexible and Quiet

Remote Control

Fan

Speed

Setting

HIGH

/ MED / LOW

FAN

Timer Off

Turbo

Temperature

Setting

Lock

Pinhole

Reset

Pinhole

Sleep

Air

Direction

Swing

Mode

Setting

SERIES

ON / OFF

AUTO / COOL

/ DRY / HEAT

LED

Display

Timer On

Swing - Distributes cool/warm air to a maximum area by

moving flaps automatically.

Sleep - Enables the air conditioner to automatically increase

(cooling) or decrease (heating) 1.8 ºF / hour for the first two

hours, then keep it steady for the next 5 hours, after that will

turn off. This function maintains both energy savings and

comfort in night operation.

Air Direction - Due to density of cold and warm air is different,

in cooling mode indoor unit blows air horizontally, while in

heating mode blows it vertically, to make room temperature

more consistent and comfortable during the operation.

Timer - The timer can be set to start ON and stop OFF at any

point in a 24 hour operation

Turbo - The air conditioner will maximize the output of cooling

or heating operation, make the room cool down or heat up

rapidly, and attain the desired temperature in the shortest time

TEMP - Sets the room temperature up or down 1º F at a time.

Applications are endless...

Smart Heating & Cooling

It is highly recomendable to replace your inefficient old room air conditioner

with quieter, more efficient, super high efficiency ductless mini split System.

Indoor Climate Changer

Indoor nurseries & plant growers can easily achieve the desired temperature

and control hummidity levels in different zones.

Individual Comfort & Temperature Control

Condition the storage

Heating and cooling your garage helps to maintain

low humidity and prevents mildew and keep reasonable

winter temperatures. Your stored goods are

in perfect conditions for years.

Auxiliary Cooling

When additional cooling is on demand, ductless mini split systems

can be added quickly, conveniently and economically.

Ductless Mini-splits have flexibility to fit virtually any applications

Create your own true zone cooling & heating to achieve more precise individual

comfort day and night in your home or business. Klimaire units zoning capability

allows you to set each zone with different temperature settings as desired.

You can even turn off the units in non-occupied rooms for additional energy savings,

while you can keep them at a higher temperature setting in cooling to control

humidity levels – increasing personal comfort.

Homes utilizes hydronic heat

Remote Utility transfer stations

Residential additions such as a Florida room,

sun room, bed room or garage conversions

Restaurants, Barber shops

Computer rooms (different temperature/

humidity control is required)

Historic homes

Vacation homes or cabins

•

ATMs and photo studios

Remote offices such as inside

a warehouse factory

Class rooms, indoor nurseries

Shopping malls

Nursing homes, hospitals & church

sanctuaries

Arena sky boxes

•

EZ Supplemental Capacity

In most cases it is impractical and inconvenient to utilize existing central system and

duct work for your home addition projects. Klimaire Inverter units can be easily add on

as a supplemental cooling and heating capacity for your home additions. Homeowners

enjoy zone comfort control eliminating messy duct work installation and tampering

with it, that may result in inefficient air distribution.

SERIES

Advantages of Ductless Mini-split System

Ultra High Efficiency –Units are designed up to 19 SEER (seasonal energy efficiency ratio) and 9.6

HSPF (heating seasonal performance factor) ratings that exceed government standards.

Klimaire's INVERTECH advanced inverter technology makes it possible to save energy four seasons all

year around for cooling and heating. Since these units are directly serves area being conditioned with

duct free design technology that eliminates lengthy air travels and air leakage in duct. I

For a homeowner this translates into lower utility bills.

f the ducts are

not sealed tight or in an unconditioned space such as an attic or crawler space the losses can easily be

more than 30% of energy consumption.

Sleek Design-

Easy installation–

High wall models, a low profile indoor unit in natural off-white

color to blend with any décor in home and /or in business.

It is simple to install Klimaire indoor units like hanging a

picture frame on the wall. All you need is to make a small hole not larger than 3

inches in diameter into an exterior wall and run the refrigerant lines and

electrical wires to be connected to your outdoor unit. Factory installed

condensate drain line should run through the same hole as well. Most of the

cases this hole is made on an exterior wall. Since there is a single electric power

entry connected to the outdoor unit only, it requires much less labor and

reduces installation time. Optional outdoor unit wall brackets are contractor’s

preferred solution to expedite installation process for upper floor installations.

Burglar free – On the contrary of a window air

conditioner, with ductless air conditioners systems there

are no wall openings so that access cannot be gained.

Experience the true individual comfort

SERIES

Energy Savings

Quieter operation

Comfort

Powerful

Convenient

Environmentally Friendly

– Reduction of up to 60% in energy consumption can be achieved in comparison to 10 SEER units,

which will reduce the utility bill.

– It is less noisy than a self contained window unit, or a packaged terminal unit (PTAC / PTHP),

or a central unit. A ductless split system is ultra-quiet because it does not have to push conditioned air through many

feet of ductwork, and the nosier outdoor portion of the system operates outdoors.

– A true zone temperature control optimizes your comfort. Even a single-zone or a multi-zone Klimaire

INVERTECH advanced DC Inverter technology provides maximum comfort for the entire space by individual

temperature and humidity control. By utilizing inverter technology, temperature and humidity fluctuations are

minimized, this state-of-the-art electronic climate control also changes the louver direction swings air, to create

uniform ambient conditions. When the selected temperature is reached an inverter system runs almost constantly at

low economy speed to maintain desired comfort level controlling humidity which is considered vital for comfort.

– By means of a microprocessor Inverter Technology senses the indoor air temperature of the space being

cooled or heated and adjusts the speed of the compressor to run at higher speed to meet the demand and quickly

reach the set temperature, then slows down to lower rotation speed to maintain it.

– Excellent for remodeling older homes, convenient for retrofitting, vacation homes, cabins, classrooms,

churches, nursing homes, restaurants, computer rooms, sun rooms, ATMs, office lobbies and remote offices.

– Our units use environmentally

friendly R-410A refrigerant designed to prevent the depletion

of the ozone layer. Our super high efficiency products contribute

to reduce fossil fuel consumption and limit air pollution.

SERIES

Turbo mode –

Sleep mode –

Auto-restart & memory function –

Dry mode –

Auto level swing –

To bring the room quickly to the

desired temperature the air conditioner

maximizes the cooling or heating output

capacity by operating the fan at very high

speed to attain the set temperature in the

shortest time.

On this function the unit

automatically adjusts the temperature setting

by 1.8 ºF per hour for the first two hours, then

holds it steady for the next 5 hours and after

that it switches off for all-night comfort.

If the power

fails no setting will be lost, when the power

resumes, the air conditioner will restart with

the previous function setting automatically

eliminating the need for re-programming.

The individual dehumidification

mode efficiently helps to control humidity level

when cooling may not be necessary.

Distributes cool/warm air to

a maximum area by moving flaps automatically.

Comfort

Features

Respected for its reliability

Desired for its all season performance

Air direction –

Low ambient operation –

Anti-cold Air –

Adjustable indoor fan control –

Since cold air and warm air

density is different, in cooling mode the indoor

unit blows air horizontally while vertically in

heating mode. This technology makes the room

temperature more consistent and comfortable

during operation.

Units can operate

down to 5 ºF in heating mode.

(Heat pump only) When starting

the heating operation, the fan speed is

automatically regulated from the lowest level

to the pre-set level according to the

temperature rising of the evaporator.

This function prevents cold air blowing out at

the beginning of the operation, avoiding

discomfort to the user.

Changes the

fan speed to 3 different settings to

accommodate user's needs. It also helps to

control humidity level when cooling may not be

necessary.

TECHNOLOGY

SERIES

018

Efficiency

SEER

Power Supply

1: 115 / 1 / 60

2 : 208-230 / 1 / 60

Operational Information

C: Cooling Only

H: Heat Pump

Nominal Capacity (kBtu/h)

Product Series

Unit Type

I : Inverter

Model

S: System

Brand

K: Klimaire

PRODUCT CODE:

NOMENCLATURE

KSIL Single Zone 16 SEER - Heat Pump

GENERAL SPECIFICATIONS

SERIES

Performer 16 Series

Dimensions

KSIL030-H216 KSIL036-H215

No No

30.000 36.000

12,650 - 36,150 15,180 -43,370

30.000 36.000

14,100 - 37,800 16,900 - 45,390

6,342 8,033

10 9,5

16 14,5

9,6 9

1600 1600

942 942

50/48/46 50/48/46

59 59

208-230 / 1 / 60 208-230 / 1 / 60

13 16,0

11 16,0

16 20

25 30

3.000 3.800

2.500 3.450

4 4

16 16

1445 x 340 x 277 1445 x 340 x 277

56"-7/8 x 13"-3 /8 x 10"-7 /8 56"-7/8 x 13"-3 /8 x 10"-7 /8

1530 x 365 x 420 1530 x 365 x 420

60"-1/4 x 14"-3/8 x 16"-9/16 60"-1/4 x 14"-3/8 x 16"-9/16

53 / 71 53 / 71

895 × 860 × 330 990 x 965 x 345

35"-1/4 × 33"-1/4 × 13" 39" x 38" x 13"-9/16

1043 x 915 x 395 1120 x 1100 x 435

41"-1/16 × 36" × 15"-9/16 44"-1/8 x 43"-5/16 x 17"-1/8

157 / 165 181 / 190

R-410A R-410A

Flare Flare

Ф9.53(3/8") Ф9.53(3/8")

Ф16(5/8") Ф16(5/8")

550/340 PSIG 550/340 PSIG

82 98

33 49

971 971

1260 / 1090 / 950 1260 / 1090 / 950

5～ 122/5～ 93.2 5～ 122/5～ 93.2

50/47/43 50/46/42

59 65

1400-1900 1900-2500

Option Option

YES YES

Option Option

24 24

Klimaire Model No. KSIL009-H216 KSIL012-H216 KSIL018-H216 KSIL024-H216

Energy Star

No No No No

Cooling Capacity Btu/h

9.000 12.000 18.000 23.000

Inverter Cooling Capacity Range

Btu/h 5,000 - 12,800 5,000 - 16,100 5,800 - 22,000 9,700 - 28,300

Heating Capacity Btu/h

10.700 13.000 18.900 23.000

Inverter Heating Capacity Range

Btu/h 5,000 - 13,000 5,000 - 16,500 5,800 - 24,000 10,800 - 29,000

Dehudimification Pts/h 2,114 2,537 3,805 5,285

EER Btu/W.h

12,4 12 12 9,6

SEER Btu/W.h

16 16,6 17 16

HSPF Btu/W.h

9,2 9 8,2 7,8

Indoor Air Flow Volume m3/h 670 880 1150 1150

cfm 395 518 677 677

Indoor Noise Level - Hi/Med/Lo

dB(A) 40/36/30 43/41/39 49/45/42 49/45/42

Outdoor Noise Level

dB(A) 52 54 54 56

Power input V / ph / Hz 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60

Amps (Cool) A 4 5 7 11

Amps (Heat) A 4 5 7 11

Minimum Cicuit Amp. A 8 8 14 15

Max. Overc. Protection A 15 15 20 25

Watts (Cool) W 750 1.000 1.500 2.410

Watts (Heat) W 820 1.020 1.580 2.520

No. of Wires Indoor to Outdoor

4 4 4 4

Wire Size # Indoor to outdoor AWG

16 16 16 16

Indoor Unit Dimensions mm

790 x 265 x 198 920 x 292 x 223

998 x 322 x 240 998 x 322 x 240

(W*H*D) in

31"-1/8 x 10"-7/16 x 7"-13/16 36"-1/4 x 11"-1/2 x 8"-3/4

39"-5/16 x 12"-11 /16 x 9"-7/16 39"-5/16 x 12"-11 /16 x 9"-7/16

Indoor Unit Packing mm

875 x 335 x 265 1015 x 368 x 295

1080 x 320 x 400 1080 x 320 x 400

Dimensions (W*H*D) in

34"-7/8 x 13"-3/16 x 10"-7/16 39"-15/16 x 14"-1/2 x 11"-5/8

42"-1/2 x 12"-5/8 x 15"-3 /4 42"-1/2 x 12"-5/8 x 15"-3/4

Indoor Unit Net/Gross Weight lb

18 / 22 26 / 33 29 / 38 30 / 36

Outdoor Unit Dimensions mm 760 × 590 × 285 760 × 590 × 285 845 × 695 × 335 895 × 860 × 330

(W*H*D) in 29"-15/16 × 23"-1/4 × 11"-1/4 29"-15/16 × 23"-1/4 × 11"-1/4 33"-1/4 × 27"-3/8 × 13"-3/16 33"-1/4 × 27"-3/8 × 13"-3/16

Outdoor Unit Packing mm 887 x 645 x 355 887 x 645 x 355 965 x 755 x 395 965 x 755 x 395

Dimensions (W*H*D) in 34"-15/16 × 25"-13/16 × 14" 34"-15/16 × 25"-13/16 × 14" 38" × 29"-3/4 × 15"-9/16 38" × 29"-3/4 × 15"-9/16

Outdoor Unit Net / Gross Weight lb

84 / 90 88 / 93 110 / 120 109 / 116

Refrigerant Gas Type R-410A R-410A R-410A R-410A

Charge Amount oz / g

Refrigerant connections

Flare Flare Flare Flare

Piping size - Liquid mm (in) Ф6.35(1/4") Ф6.35(1/4") Ф9.53(3/8") Ф9.53(3/8")

Gas mm (in) Ф9.53(3/8") Ф12.7(1/2") Ф16(5/8") Ф16(5/8")

Design Pressure psig

550/340 PSIG 550/340 PSIG 550/340 PSIG 550/340 PSIG

Max. Line Run

66 66 82 82

Max. Elevation difference

26 26 33 33

Indoor Unit Air Circulation cfm

394 518 676 676

Fan Speeds H / M / L

1200/940/800 1200/940/800 1285 / 1245 / 1040 1285 / 1245 / 1040

Temp. Setting Range

On Remote 62º F - 88º F

Low Ambient Operation

(cooling/heating)

ºF

5～ 122/5～ 93.2 5～ 122/5～ 93.2 5～ 122/5～ 93.2 5～ 122/5～ 93.2

Noise level indoor (H/M/L) dB(A)

40/36/30 44/41/39 50/45/42 49/45/42

Noise level outdoor dB(A)

55 54 59 60

Applicable Area Sq.Ft.

350-400 450-550 700-1000 1100-1400

Follow me Option Option Option Option

Turbo Mode YES YES YES YES

Anto-restart YES YES YES YES

LCD display YES YES YES YES

Auto level swing YES YES YES YES

Active Carbon Option Option Option Option

Golden Fin Option Option Option Option

Vitamin C Filter Option Option Option Option

Bio Filter Option Option Option Option

Sliver Ion Filter Option Option Option Option

Finger Guard net Option Option Option Option

Timer 24 24 24 24

Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part.

Allways comply with local, state, and national electrical codes.

1 - Minimum 10 ft line set recommended.

2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m)

3 - Factory installed only, not field option

4 - Units may operate in heating mode until the ambient conditions reach 5º F

C US

SERIES

KSIL Single Zone 19 SEER - Heat Pump

GENERAL SPECIFICATIONS

Performer 19 Series

Dimensions

C US

Klimaire Model No. KSIL009-H119 KSIL012-H219 KSIL018-H219

Energy Star

YES YES YES

Cooling Capacity Btu/h

9.000 12.000 18.000

Inverter Cooling Capacity Range

Btu/h 5,000 - 12,800 5,000 - 16,100 5,800 - 22,000

Heating Capacity Btu/h

10.000 13.000 19.000

Inverter Heating Capacity Range

Btu/h 5,000 - 13,000 5,000 - 16,500 5,800 - 24,000

Dehudimification Pts/h 2,11 2,54 3,81

EER Btu/W.h

14 12,5 12,5

SEER Btu/W.h

19 18,8 19,2

HSPF Btu/W.h

9,6 9,3 9,6

Indoor Air Flow Volume m3/h 750 850 1150

cfm 440 500 675

Indoor Noise Level - Hi/Med/Lo

dB(A) 39/35/32 41/37/34 48/40/36

Outdoor Noise Level

dB(A) 53 54 54

Power input V / ph / Hz 115 / 1 / 60 230 / 1 / 60 230 / 1 / 60

Amps (Cool) A 6,0 5,0 7

Amps (Heat) A 7 6,0 7

Minimum Cicuit Amp. A 15 8 13

Max. Overc. Protection A 25 15 20

Watts (Cool) W

650 1000 1460

Watts (Heat) W

790 1250 1470

No. of Wires Indoor to Outdoor

4 4 4

Wire Size # Indoor to outdoor AWG

16 16 16

Indoor Unit Dimensions mm

920x292x223

920x292x223 998x322x240

(W*D*H) in

36"-1/4 x 11"-1/2 x 8"-3/4 36"-1/4 x 11"-1/2 x 8"-3/4

39"-5/16 x 12"-11 /16 x 9"-7/16

Indoor Unit Packing mm

1015 x 368 x 295 1015 x 368 x 295

1080x320x400

Dimensions (W*D*H) in

39"-15/16 x 14"-1/2 x 11"-5/8 39"-15/16 x 14"-1/2 x 11"-5/8

42"-1/2 x 12"-5/8 x 15"-3 /4

Indoor Unit Net/Gross Weight lb

26 / 32 26 / 32 29 / 37

Outdoor Unit Dimensions mm 760×590×285 760×590×285 845×695×335

(W*D*H) in 29"-15/16 × 23"- 1/4 × 11"-1/4 29"-15/16 × 23"- 1/4 × 11"-1/4 33"- 1/4 × 27"-3/8 × 13"- 3/16

Outdoor Unit Packing mm 887 × 655 × 355 887 × 655 × 355 965 × 755 × 395

Dimensions (W*D*H) in 34"-15/16 × 25"-13/16 × 14" 34"-15/16 × 25"-13/16 × 14" 38" × 29"-3/4 × 15"-9/16

Outdoor Unit Net / Gross Weight lb

83 / 88 88 / 93 105 / 113

Refrigerant Gas Type R-410A R-410A R-410A

Charge Amount g

1600 1600 1750

Refrigerant connections

Piping size - Liquid mm (in) Ф6.35 (1/4") Ф6.35 (1/4") Ф9.53 (3/8")

Gas mm (in) Ф9.53 (3/8") Ф12.7 (1/2") Ф16 (5/8")

Design Pressure psig

550/340 PSIG 550/340 PSIG 550/340 PSIG

Max. Line Run

66 66 82

Max. Elevation difference

26 26 33

Indoor Unit Air Circulation m3/h

750 850 1150

cfm

441 500 676

Fan Speeds H / M / L

1150 / 1000 / 850 1200 / 940 / 800 1285 / 1245 / 1040

Temp. Setting Range

On remote 62º F - 88º F

Low Ambient Operation

(cooling/heating)

ºF

5～122/5～93.2 5～122/5～93.2 5～122/5～93.2

Noise level indoor (H/M/L) dB(A)

39/35/32 41/37/34 48/44/42

Noise level outdoor dB(A)

53 55 59

Applicable Area Sq.Ft.

350-400 450-550 700-1000

Follow me Option Option Option

Turbo Mode YES YES YES

Anto-restart YES YES YES

LCD display YES YES YES

Auto level swing YES YES YES

Active Carbon Option Option Option

Golden Fin Option Option Option

Vitamin C Filter Option Option Option

Bio Filter Option Option Option

Sliver Ion Filter Option Option Option

Finger Guard net Option Option Option

Timer 24 24 24

KSIL024-H219

YES

24.000

9,700 - 28,300

24.000

10,800 - 29,000

5,50

12,5

9,6

1600

940

50/48/46

230 / 1 / 60

9,1

9,0

2100

1980

1445x340x277

56"-7/8 x 13"-3 /8 x 10"-7 /8

1530x365x420

60"-1/4 x 14"-3/8 x 16"-9/16

58 / 71

895×860×330

35"-1/ 4 × 33"-7/8 × 13"

1043 × 915 × 395

41 "-1/16 × 36" × 15"- 9/16

159 / 168

R-410A

2540

Ф9.53 (3/8")

Ф16 (5/8")

550/340 PSIG

1600

941

1260 / 1090 / 950

5～122/5～93.2

51/48/45

1100-1400

Option

YES

Option

Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part.

Allways comply with local, state, and national electrical codes.

1 - Minimum 10 ft line set recommended.

2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m)

3 - Factory installed only, not field option

4 - Units may operate in heating mode until the ambient conditions reach 5º F