Exmark 4500-620 User manual

Type
User manual

This manual is also suitable for

STANDON
ForSerialNos.
850,000&Higher
PartNo.4500-620Rev.B
Exmarkreservestherighttomakechangesor
addimprovementstoitsproductsatanytime
withoutincurringanyobligationtomakesuch
changestoproductsmanufacturedpreviously.
Exmark,oritsdistributorsanddealers,accept
noresponsibilityforvariationswhichmaybe
evidentintheactualspecicationsofitsproducts
andthestatementsanddescriptionscontained
inthispublication.
©2011—ExmarkMfg.Co.,Inc.
IndustrialParkBox808
Beatrice,NE68310
2
Contactusatwww.Exmark.com.
PrintedintheUSA
AllRightsReserved
Introduction
CONGRATULATIONSonthepurchaseofyour
ExmarkStandOn.Thisproducthasbeencarefully
designedandmanufacturedtogiveyouamaximum
amountofdependabilityandyearsoftrouble-free
operation.
Thismanualcontainsassembly,operating,
maintenance,adjustment,andsafetyinstructionsfor
yourStandOn.
BEFOREOPERATINGYOURMOWER,
CAREFULLYREADTHISMANUALINITS
ENTIRETY.
Byfollowingtheoperating,maintenance,and
safetyinstructions,youwillprolongthelifeofyour
StandOn,maintainitsmaximumefciency,and
promotesafeoperation.
Ifadditionalinformationisneeded,orshouldyou
requiretrainedmechanicservice,contactyour
authorizedExmarkequipmentdealerordistributor.
Exmarkpartsmanualsareavailableonlineat
http://www.exmark.com/manuals.htm.
AllExmarkequipmentdealersanddistributorsare
keptinformedofthelatestmethodsofservicing
andareequippedtoprovidepromptandefcient
serviceintheeldorattheirservicestations.They
carryamplestockofservicepartsorcansecurethem
promptlyforyoufromthefactory.
AllExmarkpartsarethoroughlytestedandinspected
beforeleavingthefactory,however,attentionis
requiredonyourpartifyouaretoobtainthefullest
measureofsatisfactionandperformance.
Wheneveryouneedservice,genuineExmarkparts,
oradditionalinformation,contactanAuthorized
ServiceDealerorExmarkCustomerServiceandhave
themodelandserialnumbersofyourproductready.
Figure1identiesthelocationofthemodelandserial
numbersontheproduct.Writethenumbersinthe
spaceprovided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
3
Contents
Introduction...........................................................3
Safety.....................................................................5
SafetyAlertSymbol.........................................5
SafeOperatingPractices..................................5
SafetyandInstructionalDecals.......................7
Specications.........................................................8
ModelNumbers..............................................8
Dimensions.....................................................8
Tire.................................................................8
Setup......................................................................9
AssemblyDiagram..........................................9
InstallingtheStandOnRidertoMower...........10
Operation.............................................................13
Pre-Start........................................................13
OperatingInstructions..................................13
Transporting.................................................13
Maintenance.........................................................14
RecommendedMaintenanceSchedule(s)...........14
PeriodicMaintenance.......................................14
InspectStandOn...........................................14
CheckStandOnforBuildup...........................14
LubricateGreaseFittings...............................14
LubricateCasterWheelHubs........................15
Adjustments.....................................................16
AdapterPlateandTireAdjustment................16
4
Safety
Safety
SafetyAlertSymbol
ThisSafetyAlertSymbol(Figure2)isusedbothin
thismanualandonthemachinetoidentifyimportant
safetymessageswhichmustbefollowedtoavoid
accidents
Thissymbolmeans:ATTENTION!BECOME
ALERT!YOURSAFETYISINVOLVED!
Figure2
1.Safetyalertsymbol
Thesafetyalertsymbolappearsaboveinformation
whichalertsyoutounsafeactionsorsituations
andwillbefollowedbythewordDANGER,
WARNING,orCAUTION.
DANGER:Whitelettering/Redbackground.
Indicatesanimminentlyhazardoussituationwhich,if
notavoided,Willresultindeathorseriousinjury.
WARNING:Blacklettering/Orangebackground.
Indicatesapotentiallyhazardoussituationwhich,if
notavoided,Couldresultindeathorseriousinjury.
CAUTION:Blacklettering/Yellowbackground.
Indicatesapotentiallyhazardoussituationwhich,if
notavoided,Mayresultinminorormoderateinjury.
Thismanualusestwootherwordstohighlight
information.Importantcallsattentiontospecial
mechanicalinformationandNoteemphasizes
generalinformationworthyofspecialattention.
SafeOperatingPractices
Training
ReadthetractorandStandOnOperator’sManuals
andothertrainingmaterial.Iftheoperator(s)or
mechanic(s)cannotreadEnglishitistheowner’s
responsibilitytoexplainthismaterialtothem.
Becomefamiliarwiththesafeoperationofthe
equipment,operatorcontrols,andsafetysigns.
Alloperatorsandmechanicsshouldbetrained.
Theownerisresponsiblefortrainingtheusers.
Neverletchildrenoruntrainedpeopleoperate
orservicetheequipment.Localregulationsmay
restricttheageoftheoperator.
Theowner/usercanpreventandisresponsible
foraccidentsorinjuriesoccurringtohimselfor
herself,otherpeopleorproperty.
Onlyadultsandmatureteenagersshouldoperate
amower,andevenmatureteenagersshouldhave
adultsupervision.Besureateenager:
1.hasreadandunderstandstheOperator’s
Manualandrecognizestherisksinvolved;
2.issufcientlymaturetousecaution;and
3.isofsufcientsizeandweighttooperate
thecontrolscomfortablyandtomanagethe
mowerwithouttakingrisks.
OnlyallowthemachineoperatorontheStandOn.
Preparation
DoNotmodifytheStandOn.
Evaluatetheterraintodeterminewhataccessories
andattachmentsareneededtoproperlyandsafely
performthejob.Onlyuseonmachinesapproved
byExmark.
Wearappropriateclothingincludingsafetyglasses,
substantialfootwear,longtrousers,andhearing
protection.DoNotoperatewhenbarefootor
whenwearingopensandals.
CAUTION
ThemachinethattheStandOnattachesto
producessoundlevelsinexcessof85dBAat
theoperator’searandcancausehearingloss
throughextendedperiodsofexposure.
Wearhearingprotectionwhenoperatingthis
machine.
Inspecttheareawheretheequipmentistobe
usedandremoveallrocks,toys,sticks,wires,
bones,andotherforeignobjectswhichcanbe
thrownbythemachineandmaycausepersonal
injurytotheoperatororbystanders.
5
Safety
Operation
Operateonlyindaylightorgoodarticiallight,
keepingawayfromholesandhiddenhazards.
Stopengine,waitforallmovingpartstostop,
removekeyandengageparkingbrakewhenever
youleavethemower.
SlopeOperation
UseExtremecautionwhenmowingand/orturning
onslopesaslossoftractionand/ortip-overcould
occur.Theoperatorisresponsibleforsafeoperation
onslopes.
DANGER
Operatingonwetgrassorsteepslopescan
causeslidingandlossofcontrol.Lossof
controland/orlossofoperator’sfooting
couldresultinafallwithanarmorleg
gettingunderthemowerorenginedeck
whichmayresultinseriousinjury,deathor
drowning.
Mowacrossslopes,neverupanddown.
DoNotmowslopeswhengrassiswet.
DoNotmowneardrop-offsornearwater.
DoNotmowslopesgreaterthan20
degrees.
Reducespeedanduseextremecaution
onslopes.
Avoidsuddenturnsorrapidspeed
changes.
Seeinsidethebackcovertodeterminethe
approximateslopeangleoftheareatobemowed.
Removeormarkobstaclessuchasrocks,tree
limbs,etc.fromthemowingarea.Tallgrasscan
hideobstacles.
Watchforditches,holes,rocks,dipsandrisesthat
changetheoperatingangle,asroughterraincould
overturnthemachine.
Avoidsuddenstartswhenmowinguphillbecause
themowermaytipbackwards.
Beawarethatoperatingonwetgrass,acrosssteep
slopesordownhillmaycausethemowertolose
traction.Lossoftractiontothedrivewheelsmay
resultinslidingandalossofbrakingandsteering.
Alwaysavoidsuddenstartingorstoppingona
slope.Iftireslosetraction,disengagetheblades
andproceedslowlyofftheslope.
Followthemanufacturer’srecommendationsfor
wheelweightsorcounterweightstoimprove
stability.
AlwaysinstallandremovetheStandOnas
instructed.Failuretodosowillcauseareduction
instabilityortraction.
MaintenanceandStorage
Disengagedrives,setparkingbrake,stopengine
andremovekeyordisconnectsparkplugwire.
Waitforallmovementtostopbeforeadjusting,
cleaningorrepairing.
Usecarewhencheckingblades.Wraptheblade(s)
orweargloves,andusecautionwhenservicing
them.Onlyreplacedamagedblades.Never
straightenorweldthem.
Keepallguards,shieldsandallsafetydevicesin
placeandinsafeworkingcondition.
Checkallboltsfrequentlytomaintainproper
tightness.
Frequentlycheckforwornordeteriorating
componentsthatcouldcreateahazard.
Allreplacementpartsmustbethesameas
orequivalenttothepartssuppliedasoriginal
equipment.
6
Safety
SafetyandInstructionalDecals
Keepallsafetysignslegible.Removeallgrease,
dirtanddebrisfromsafetysignsandinstructional
labels.
Replaceallworn,damaged,ormissingsafety
signs.
Whenreplacementcomponentsareinstalled,be
surethatcurrentsafetysignsareafxedtothe
replacedcomponents.
Ifanattachmentoraccessoryhasbeeninstalled,
makesurecurrentsafetysignsarevisible.
Newsafetysignsmaybeobtainedfrom
yourauthorizedExmarkequipmentdealeror
distributororfromExmarkMfg.Co.Inc.
Safetysignsmaybeafxedbypeelingoffthe
backingtoexposetheadhesivesurface.Apply
onlytoaclean,drysurface.Smoothtoremove
anyairbubbles.
Familiarizeyourselfwiththefollowingsafetysigns
andinstructionlabels.Theyarecriticaltothesafe
operationofyourExmarkcommercialmower.
1-303517
1-403143
103-9141
7
Specications
Specications
ModelNumbers
SerialNos:850,000andHigher
STANDON
Dimensions
Length
Width
HeightWeight
35.4inches
(89.9cm)
18.5inches
(47.0cm)
14.9inches
(37.9cm)
50lb(23kg)
Tire
Tread
Size
Semi-Pneumatic
Tire
Smooth
11x4.00–5
ForOperatorsover250lbitisrecommendedtouse
pneumatictireassemblyP/N103-3798.
8
Setup
Setup
AssemblyDiagram
Item
QuantityDescription
18
Nut,Nyloc3/8-16Flg
22
Plate,Back-Up
3
2
Plate,Adapter
4
8
Screw,HH3/8-16x11/4
5
1
Asm,FramePullW/Decals
6
1
Asm,PullArmW/Brgs
7
1
Guard,Top
81
Screw,HH3/8–16x43/4
9
1
Nut,HexFlg-SideLock3/8-16
10
1
Asm,SulkyFrameW/Decals
11*2
Decals,Replacement(TurfTracerand
VikingHydroOnly)
121
Washer,SpringDisc
*Notshowninillustration
Figure3
9
Setup
InstallingtheStandOnRider
toMower
MountingthePullFrame
1.Locatethepullframeandtwoadapterplates.
Installthepullframetotheadapterplatesusing
four3/8-16x11/4inchhexcapscrewsandfour
3/8-16inchnylocnutsasshowninFigure4.
3
4
4
2
1
1
2
G009397
Figure4
1.3/8-16inchnylocnuts
2.Adapterplate
3.Pullframe
4.3/8-16x11/4inchhexcapscrews
2.Mountingthepullframeassemblytotheengine
deck:
A.ForTurfTracerandVikingHydroUnits
Only:
a.Ifyourunithasfourholesdrilledinthe
rearsurfaceoftheenginedeckproceedto
stepc;ifnot,continuewithstepb.
b.Removethetwodecalsonthelowerrear
surfaceoftheenginedeck(seeFigure5).
Figure5
1.Removethesetwodecals.
c.Centertheadapterplatesonthelowerrear
surfaceofthemowerenginedeckand
markthefourholelocationsshownin
Figure6.Drillfour0.407inchdiameter
holesthroughtheenginedeckatthe
markedlocations.
Figure6
1.Pullframeandadapterplateassembly
2.Markanddrilltwoholeseachside.
d.Applythetworeplacementdecalstothe
enginedeckbetweenthemountingholes
(seeFigure7).
10
Setup
Figure7
1.Replacementdecals
e.Alignthepullframeandadapterplate
assemblytotherearsurfaceoftheengine
deck.Measurethedistancefromthe
bottomofthepullframetotheground.
Choosethemountholesthatwillattaina
distanceapproximately8inches(20cm).
Installthemountbracketstothemower
enginedeckusingtwo3/8-16x11/4inch
hexcapscrews,twoback-upplates,and
two3/8-16inchnylocnutsasshownin
Figure8).
Figure8
1.3/8-16x11/4inchhex
capscrews
3.Backupplates
2.Pullframeandadapter
plateassembly
4.3/8-16inchnylocnuts
B.ForTurfTracerHPandMetroHPUnits:
a.Alignthepullframeandadapterplate
assemblytotherearsurfaceoftheengine
deck.Measurethedistancefromthe
bottomofthepullframetotheground.
Choosethemountholesthatwillattaina
distanceofapproximately8inches.
b.Installtheadapterplatestothemower
enginedeckusingtwo3/8-16x1/4
inchhexcapscrewsandtwo3/8-16inch
angednylocnutsasshowninFigure9.
Figure9
1.3/8-16x1/4inchhexcapscrews
2.Pullframeandadapterplateassembly
3.3/8-16inchangednylocnuts
MountingthePullArmandPlatform
ForTurfTracer,TurfTracerHP ,MetroHP ,and
VikingHydroUnits:
1.Locatethepullarmassembly.Alignthepull
armassemblywiththepullframeasshownin
Figure10.Squeezethequickconnectpinson
thepullarmassemblyandattachthepullarm
assemblytothepullframe.
11
Setup
Figure10
1.Pullarmassembly
3.Pullframe
2.Quickconnectpins
2.Removethe3/8-16x43/4inchhexcapscrew.
springdiscwasher,and3/8-16inchhexange
sidelocknutfromthepivothub.
3.Locatethesulkyframeassemblyandalignwith
thepullarmassembly.Re-installthe3/8-16x4
3/4inchhexcapscrew ,springdiscwasher,and
3/8-16inchhexangesidelocknutremovedin
step1asshowninFigure11.Torqueto35-38
ft-lb(47-52N-m).
Figure11
1.Pullframeassembly4.Sulkyframeassembly
2.3/8-16x43/4inchhex
capscrew
5.3/8-16inchhexange
sidelocknut
3.Springdiscwasher
Important:Foroptimalperformance,the
StandOnpullarmtopsurfaceshouldbe
horizontaltothegroundsurface.
Toobtainapositionasclosetohorizontalas
possible,theadjustmentbracketsandtheplatform
wheelcanberepositioned(seeAdapterPlate
andTireAdjustmentsectioninMaintenance).
12
Operation
Operation
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
Pre-Start
1.Makesureyouunderstandthecontrols,their
locations,theirfunctions,andtheirsafety
requirements.
2.Practiceoperatingthemachinewithoutthe
StandOnuntilfamiliarwiththecontrols.
3.PracticeoperatingthemachinewiththeStandOn
attachedonlarge,open,levelterrainwithno
obstaclespresentbeforeuse.theStandOnwill
affectthemachineoperation,especiallyonslopes,
whenturning,andwhenstopping.
4.Ensurethepullarmassemblyissecurely
connectedtothepullframe.
5.ForMetroHPUnits:Wheeldrivebelttension
mayneedadjustment.Refertothemachine
Operator’sManualforadjustmentinstructions.
6.ForoperationofStandOnwithMetroHP ,Viking
Hydro,andTurfTracerHPonhillyterrain,
frontweightkitaccessory,P/N103-2637,is
recommended.
7.Foroperatorsover250lb,itisrecommendedto
usepneumatictireassembly,P/N103-3798.
OperatingInstructions
Mowing
DANGER
IftheStandOnrotatesbeyond90°,thereis
apotentialcrushinghazard.Rapidrotation
beyond90°cancausetheStandOnto
jackknifeintothemowerenginedeckand
causeseriousinjury.
DismounttheStandOnandplacein
transportpositionbeforeoperatingin
reverse.
Reducespeedwhenmakingsharpturns
andoperatingonslopes.
1.UsecarewhenturningtoensurethatyouDoNot
swingyourselfandthesulkyintoobstacles.
2.Whenturning,leanforwardandtowardthe
directionoftheturntohelpinkeepingbalance.
Transporting
TransportingaUnit
PlacetheStandOninthetransportpositionwhen
loadingaunitonatrailer,unloadingaunitfroma
trailer,oroperatinginreverse(seeFigure12).
Figure12
1.Latchpin
2.Rotateplatformintotransportpositionandlockwith
latchpin
13
Maintenance
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
WARNING
Whilemaintenanceoradjustmentsarebeing
made,someonecouldstarttheengine.
Accidentalstartingoftheenginecould
seriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitch,
engageparkingbrake,andpullthewire(s)
offthesparkplug(s)beforeyoudoany
maintenancetotheunitorStandOn.
Alsopushthewire(s)asidesoitdoesnot
accidentallycontactthesparkplug(s).
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Beforeeachuseordaily
InspecttheStandOn.
Checkfordirt/mudbuildupbetweentireandfender.
Every25hours
Greasepullarmpivot.
Yearly
Greasecasterwheelhub.
Lubricatethecasterwheelhubs.
PeriodicMaintenance
InspectStandOn
ServiceInterval:Beforeeachuseordaily
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.Inspectforloosehardware.Tightenanyloose
hardware.
3.Inspectforwearordamagedaily.Replaceor
repairwornpartsasneededbeforeoperating.
CheckStandOnforBuildup
ServiceInterval:Beforeeachuseordaily
Checkfordirt/mudbuildupbetweentireandfender.
Removebuildupbeforeoperating.
LubricateGreaseFittings
Note:Seechartforserviceintervals.
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.LubricatettingswithNGLIgrade#2
multi-purposegungrease.
Refertothefollowingchartforttinglocations
andlubricationschedule.
LubricationChart
Fitting
Locations
Initial
Pumps
Numberof
Places
Service
Interval
1.PullArm
Pivot
1–21
Yearly
2.Caster
WheelHub
0*
1
Yearly
14
Maintenance
LubricateCasterWheelHubs
ServiceInterval:Yearly
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
Figure13
1.Sealguard2.Spacernutwithwrench
ats
2.Removethecasterwheelfromthesulkyframe.
3.Removesealguardsfromthewheelhub.
4.Removeoneofthespacernutsfromtheaxle
assemblyinthecasterwheel.Notethatthread
lockingadhesivehasbeenappliedtolockthe
spacernutstotheaxle.Removetheaxle(with
theotherspacernutstillassembledtoit)from
thewheelassembly.
5.Pryoutseals,andinspectbearingsforwearor
damageandreplaceifnecessary.
6.PackthebearingswithaNGLIgrade#1
multi-purposegrease.
7.Insertonebearing,onenewsealintothewheel.
Note:Seals(ExmarkPN103-0063)mustbe
replaced.
8.Iftheaxleassemblyhashadbothspacernuts
removed(orbrokenloose),applyathreadlocking
adhesivetoonespacernutandthreadontothe
axlewiththewrenchatsfacingoutward.Do
Notthreadspacernutallofthewayontotheend
oftheaxle.Leaveapproximately1/8inch(3mm)
fromtheoutersurfaceofthespacernuttothe
endoftheaxleinsidethenut.
9.Inserttheassemblednutandaxleintothewheel
onthesideofthewheelwiththenewsealand
bearing.
10.Withtheopenendofthewheelfacingup,ll
theareainsidethewheelaroundtheaxlefullof
NGLIgrade#1multi-purposegrease.
11.Insertthesecondbearingandnewsealintothe
wheel.
12.Applyathreadlockingadhesivetothesecond
spacernutandthreadontotheaxlewiththe
wrenchatsfacingoutward.
13.Torquethenutto75-80in-lb(8-9N-m),loosen,
thenre-torqueto20-25in-lb(2-3N-m).Make
sureaxledoesnotextendbeyondeithernut.
14.Reinstallthesealguardsoverthewheelhuband
insertwheelintothesulkyframe.Reinstallcaster
boltandtightennutfully.
Important:Topreventsealandbearingdamage,
checkthebearingadjustmentoften.Spinthe
castertire.Thetireshouldnotspinfreely
(morethan1or2revolutions)orhaveanyside
play.Ifthewheelspinsfreely,adjusttorqueon
spacernutuntilthereisaslightamountofdrag.
Reapplythreadlockingadhesive.
15
Maintenance
Adjustments
AdapterPlateandTire
Adjustment
Important:Foroptimalperformance,the
StandOnpullarmtopsurfaceshouldbe
horizontaltothegroundsurface.
Toobtainahorizontalpullarm,theadapterplates
andtheplatformwheelcanberepositioned(see
Figure14).
Figure14
1.Adapterplatescanbemovedtoadjustheightposition
2.Pullarmshouldbehorizontaltoground
3.Wheelcanbemountedineitherholeforheight
adjustment
Note:Toachievemoregroundclearanceforhigher
cuttingheights,raisetheplatformbyusingthelower
wheeladjustmentholeandcorrespondingadapter
plateholes.
16
Conditions and Products Covered
Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty
Company, pursuant to an agreement between them, jointly
warrant on the terms and conditions herein, that we will repair,
replace or adjust any part on these products and found by us
(in the exercise of our reasonable discretion) to be defective in
factory materials or workmanship for a period of one year.
This warranty applies to Exmark commercial attachments and
accessories sold in the U.S. or Canada. This warranty may
only be assigned or transferred to a second (or third) owner by
an authorized Exmark dealer. The warranty period commences
upon the date of the original retail purchase.
Warranty Exceptions Warranty Period
• Bags, Belts and Tires 90 days
This warranty only includes the cost of parts and labor.
Items and Conditions Not Covered
This warranty does not cover the following:
• Pickup and delivery charges to and from any authorized 
Exmark Service Dealer.
• Any damage or deterioration due to normal use, wear and 
tear, or exposure.
• Cost of regular maintenance service or parts, such as filters, 
fuel, lubricants, tune-up parts, and adjustments.
• Any product or part which has been altered or misused or 
required replacement or repair due to normal wear, 
accidents, or lack of proper maintenance.
• Any repairs necessary due to use of parts, accessories or 
supplies, including gasoline, oil or lubricants, incompatible 
with the attachment or accessory or other than as 
recommended in the operator's manual or other operational 
instructions provided by Exmark.
All warranty work must be performed by an authorized
Exmark Service Dealer using Exmark approved replacement
parts.
Instructions for Obtaining Warranty Service
The product must be registered with original proof of purchase
by an Exmark Service Dealer before obtaining any warranty
service.
Contact any Exmark Service Dealer to arrange service at their
dealership. To locate a dealer convenient to you, access our
website at www.exmark.com. U.S. or Canada customers may
also call 402-223-6375.
If for any reason you are dissatisfied with the Service Dealer’s
analysis or with the assistance provided, contact us at:
Exmark Customer Service Department
The Exmark Warranty Company
2101 Ashland Avenue
Beatrice, NE 68310
402-223-6375 or
Owner’s Responsibilities
If your product requires warranty service it must be returned
to an authorized Exmark service dealer within the warranty
period. This warranty extends only to commercial attachments
and accessories operated under normal conditions. You must
read the operator’s manual. You must also properly service
and maintain your Exmark product as described in the
operator’s manual or other operational instructions provided
by Exmark. Such routine maintenance, whether performed by
a dealer or by you, is at your expense.
General Conditions
The sole liability of Exmark and Exmark Warranty Company
with respect to this warranty shall be repair or replacement of
defective components as set forth herein. Neither Exmark
nor Exmark Warranty Company shall be liable for any
incidental or consequential loss or damage.
Such damages include but are not limited to:
• Expenses related to gasoline, oil or lubricants.
• Travel time, overtime, after hours time or other 
extraordinary repair charges or charges relating to repairs or 
replacements outside of normal business hours at the place 
of business of the authorized Exmark Service Dealer.
• Rental of like or similar replacement equipment during the 
period of any warranty, repair or replacement work.
• Any telephone or telegram charges or travel charges.
• Loss or damage to person or property other than that 
covered by the terms of this warranty.
• Any claims for lost revenue, lost profit or additional cost as 
a result of a claim of breach of warranty.
• Attorney's fees.
No Claim of breach of warranty shall be cause for cancellation
or rescission of the contract of sale of any Exmark attachment
or accessory.
All implied warranties of merchantability (that the
product is fit for ordinary use) and fitness for use (that the
product is fit for a particular purpose) are limited to the
duration of the express warranty.
Some states do not allow exclusions of incidental or
consequential damages, or limitations on how long an
implied warranty lasts, so the above exclusions and
limitations may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
Exmark Commercial
Attachments and Accessories
1 Year Limited Warranty
G4500-433_B
17
ServiceRecord
Date:
DescriptionofWorkDone:ServiceDoneBy:
18
G01 1841
Figure15
Thispagemaybecopiedforpersonaluse.
1.Themaximumslopeyoucansafelyoperatethemachineonis20degrees.Usetheslopeindicatortodeterminethe
degreeofslopeofhillsbeforeoperating.DoNotoperatethismachineonaslopegreaterthan20degrees.Fold
alongtheappropriatelinetomatchtherecommendedslope.
2.Alignthisedgewithaverticalsurface,atree,building,fencepole,etc.
3.Exampleofhowtocompareslopewithfoldededge.
19
MID-MOUNT RIDING ACCESSORIES AND OPTIONS
SEE EXMARK’S COMPLETE LINE OF ACCESSORIES AND OPTIONS
WALK-BEHIND ACCESSORIES AND OPTIONS
GRASS CATCHER
MICRO-MULCH SYSTEM
TURF STRIPER
STANDON
CUSTOM RIDE SEAT SUSPENSION SYSTEM
FULL SUSPENSION SEAT
DECK LIFT ASSIST KIT
HITCH KIT
LIGHT KIT
12
V POWER PORT
MICRO-MULCH SYSTEM
OPERATOR CONTROLLED DISCHARGE
ROLL OVER PROTECTION SYSTEM (ROPS)
SUN SHADE
TRASH CONTAINER
TURF STRIPER
ULTRA VAC COLLECTION SYSTEM
ULTRA VAC QUICK DISPOSAL SYSTEM
OUT-FRONT RIDING ACCESSORIES AND OPTIONS
CUSTOM RIDE SEAT SUSPENSION SYSTEM
DUAL-TAIL WHEEL
FLOOR PAN EXTENDER
HITCH KIT
LIGHT KIT
MICRO-MULCH SYSTEM
ROLL OVER PROTECTION SYSTEM (ROPS)
SNOW BLADE
SNOWBLOWER
SUN SHADE
TRASH CONTAINER
ULTRA VAC COLLECTION SYSTEM
ULTRA VAC QUICK DISPOSAL SYSTEM
WEATHER CAB
PlaceModelNo.andSerialNo.
LabelHere(IncludedintheLiterature
Pack)orFillinBelow
DatePurchased
ModelNo.
SerialNo.
©2011ExmarkMfg.Co.,Inc.
IndustrialParkBox808
Beatrice,NE68310
AllRightsReserved
PartNo.4500-620Rev.B
(402)223-6300
Fax(402)223-5489
PrintedintheUSA
www.exmark.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Exmark 4500-620 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI