HP (Hewlett-Packard) Car Video System L1750 User manual

Brand: HP (Hewlett-Packard)

Model: Car Video System L1750

Category: TVs & monitors

Type: User manual

HP L1750, L1950, L1710, L1910, and L1908w LCD

Monitors

User Guide

Company, L.P.

Microsoft, Windows, and Windows Vista are

either trademarks or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

All other product names mentioned herein

may be trademarks of their respective

companies.

Hewlett-Packard Company shall not be liable

for technical or editorial errors or omissions

contained herein or for incidental or

consequential damages in connection with

the furnishing, performance, or use of this

material. The information in this document is

provided “as is” without warranty of any kind,

including, but not limited to, the implied

warranties of merchantability and fitness for

a particular purpose, and is subject to

change without notice. The warranties for

Hewlett-Packard products are set forth in the

express limited warranty statements

accompanying such products. Nothing

herein should be construed as constituting

an additional warranty.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Second Edition (August 2007)

Document Part Number: 449162-002

About This Guide

This guide provides information on setting up the monitor, installing drivers, using the on-screen display

menu, troubleshooting and technical specifications.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily

harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage

to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

iii

iv About This Guide

Table of contents

1 Product Features

HP LCD Monitors ................................................................................................................................. 1

2 Safety and Maintenance Guidelines

Important Safety Information ................................................................................................................ 3

Maintenance Guidelines ....................................................................................................................... 4

Cleaning the Monitor ............................................................................................................ 4

Shipping the Monitor ............................................................................................................ 4

3 Setting Up the Monitor

Unfolding the Double-Hinged Monitor Pedestal Base .......................................................................... 5

Unfolding the Single-Hinged Monitor Pedestal Base ........................................................................... 7

Rear Components ................................................................................................................................ 8

Cable Management .............................................................................................................................. 9

Connecting the Cables ....................................................................................................................... 10

Adjusting the Monitor .......................................................................................................................... 12

Turning on the Monitor ....................................................................................................................... 14

Connecting USB Devices ................................................................................................................... 15

Using the Accessory Rails .................................................................................................................. 16

Removing the Monitor Pedestal Base ................................................................................................ 16

Mounting the Monitor ......................................................................................................... 18

Locating the Rating Labels ................................................................................................................. 20

4 Operating the Monitor

Software and Utilities .......................................................................................................................... 21

The Information File ........................................................................................................... 21

The Image Color Matching File .......................................................................................... 21

Installing the .INF and .ICM Files ....................................................................................................... 22

Installing from the CD ........................................................................................................ 22

Downloading from the Worldwide Web .............................................................................. 22

Using the Auto-Adjustment Function .................................................................................................. 23

Front Panel Controls .......................................................................................................................... 24

Adjusting the Monitor Settings ............................................................................................................ 25

Using the On-Screen Display Menu .................................................................................. 25

OSD Menu Selections ....................................................................................... 26

Optimizing Digital Conversion ........................................................................... 30

Using the HP Display Assistant Utility ............................................................................... 30

Identifying Monitor Conditions ............................................................................................................ 31

Sleep Timer Mode .............................................................................................................................. 31

HP Display LiteSaver ......................................................................................................................... 32

Installing the HP Display LiteSaver Software .................................................................... 32

sRGB Support .................................................................................................................................... 33

Changing the Color Temperature ...................................................................................... 33

Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 34

Installing the sRGB ICM File for Microsoft Windows Vista ................................................ 34

Appendix A Troubleshooting

Solving Common Problems ................................................................................................................ 35

Using the Worldwide Web .................................................................................................................. 36

Preparing to Call Technical Support ................................................................................................... 36

Appendix B Technical Specifications

L1750 Model ....................................................................................................................................... 37

L1950 Model ....................................................................................................................................... 38

L1710 Model ....................................................................................................................................... 39

L1910 Model ....................................................................................................................................... 40

L1908w Model .................................................................................................................................... 41

Recognizing Preset Display Resolutions ............................................................................................ 42

L1750, L1950, L1710, and L1910 Models ......................................................................... 42

L1908w Model ................................................................................................................... 42

Entering User Modes .......................................................................................................................... 43

Energy Saver Feature ........................................................................................................................ 43

Appendix C Agency Regulatory Notices

Federal Communications Commission Notice ................................................................................... 44

Modifications ...................................................................................................................... 44

Cables ................................................................................................................................ 44

Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 44

Canadian Notice ................................................................................................................................. 45

Avis Canadien .................................................................................................................................... 45

European Union Regulatory Notice .................................................................................................... 45

German Ergonomics Notice ............................................................................................................... 46

Japanese Notice ................................................................................................................................. 46

Korean Notice ..................................................................................................................................... 46

Power Cord Set Requirements ........................................................................................................... 46

Japanese Power Cord Requirements ................................................................................ 46

Product Environmental Notices .......................................................................................................... 47

Energy Star Compliance .................................................................................................... 47

Materials Disposal ............................................................................................................. 47

Disposal of Waste Equipment by Users in Private Household in the European

Union ................................................................................................................................. 47

Restriction of Hazardous Substances (RoHS) ................................................................... 48

Appendix D LCD Monitor Quality and Pixel Policy

1 Product Features

HP LCD Monitors

The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The

monitor models and features include:

●

L1750 model, 17-inch (43.2 cm) viewable area display with 1280 × 1024 resolution, plus full-screen

support for lower resolutions

●

L1950 model, 19-inch (48.3 cm) viewable area display with 1280 x 1024 resolution, plus full-screen

support for lower resolutions

●

L1710 model, 17-inch (43.2 cm) viewable area display with 1280 × 1024 resolution, plus full-screen

support for lower resolutions

●

L1910 model, 19-inch (48.3 cm) viewable area display with 1280 × 1024 resolution, plus full-screen

support for lower resolutions

●

L1908w model, 19-inch (48.3 cm) viewable area display with 1440 × 900 resolution, plus full-screen

support for lower resolutions; includes custom scaling for maximum image size while preserving

original aspect ratio

●

Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side

●

Tilt capability

●

Pivot capability to rotate display to portrait mode (select models)

●

Swivel and height adjustment capabilities (select models)

●

Removable base for flexible monitor panel mounting solutions

●

Video signal input to support VGA analog with VGA signal cable provided

●

Video signal input to support DVI digital with DVI-D signal cable provided (select models)

●

USB 2.0 hub with one upstream (connects to the computer) and two downstream (connects to USB

devices) ports (select models)

●

USB cable provided to connect the monitor's USB hub and to the USB connector on the computer

(select models)

●

Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar

●

Plug and play capability if supported by the system

●

Privacy filter slots to insert filters (purchased separately) to block side screen viewing (select

models)

HP LCD Monitors 1

●

Security slot provision on rear of monitor for optional cable lock

●

Internal speakers (select models)

●

Audio input signal cable (select models)

●

Cable management feature for placement of cables and cords

●

On-Screen Display (OSD) adjustments in English, Dutch, French, German, Italian, Japanese,

Simplified Chinese, and Spanish for ease of setup and screen optimization

●

HP Display Assistant for adjusting monitor settiings

●

Software and documentation CD that includes software, monitor drivers, and product

documentation

●

Energy saver feature to meet requirements for reduced power consumption

●

Intelligent Management AssetControl

●

Compliant with the following regulated specifications:

◦

European Union CE Directives

◦

Swedish MPR II 1990

◦

Swedish TCO Requirements

◦

Energy Star

2 Chapter 1 Product Features

2 Safety and Maintenance Guidelines

Important Safety Information

A power cord is included with the monitor. If another cord is used, use only a power source and

connection appropriate for this monitor. For information on the correct power cord set to use with the

monitor, refer to the

Power Cord Set Requirements on page 46 in Appendix C.

WARNING! To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding feature. The grounding plug is an important safety feature.

• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.

• Disconnect power from the product by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may

accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical

outlet, grasp the cord by the plug.

To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation,

setup, posture, and health and work habits for computer users, and provides important electrical and

mechanical safety information. This guide is located on the Web at

http://www.hp.com/ergo and/or on

the documentation CD, if one is included with the monitor.

CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the

computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge

protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips

provide surge protection; the power strips must be specifically labeled as having this ability. Use a power

strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if

surge protection fails.

Important Safety Information 3

Maintenance Guidelines

To enhance the performance and extend the life of the monitor:

●

Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those

controls that are covered in the operating instructions. If the monitor is not operating properly or

has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

●

Use only a power source and connection appropriate for this monitor, as indicated on the label/

back plate of the monitor.

●

Be sure the total ampere rating of the products connected to the outlet does not exceed the current

rating of the electrical outlet, and the total ampere rating of the products connected to the cord does

not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS

or A) for each device.

●

Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the

plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

●

Turn the monitor off when not in use. You can substantially increase the life expectancy of the

monitor by using a screen saver program and turning off the monitor when not in use.

●

Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked

or covered. Never push objects of any kind into cabinet slots or other openings.

●

Do not drop the monitor or place it on an unstable surface.

●

Do not allow anything to rest on the power cord. Do not walk on the cord.

●

Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.

●

When removing the monitor base, you must lay the monitor face down on a soft area to prevent it

from getting scratched, defaced, or broken.

Cleaning the Monitor

1. Turn off the monitor and the computer.

2. Unplug the monitor from the wall outlet.

3. Clean the monitor plastics with a clean cloth dampened with water.

4. Clean the monitor screen with an antistatic screen cleaner.

CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean the

monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.

4 Chapter 2 Safety and Maintenance Guidelines

3 Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other

attached devices, then follow the instructions below.

Unfolding the Double-Hinged Monitor Pedestal Base

1. Lift the monitor from its box and place it on a flat surface with the display head facing up.

2. Pivot the display head from portrait to landscape position (1).

3. Remove the swivel locking pin (2).

Figure 3-1 Removing the Swivel Locking Pin

Unfolding the Double-Hinged Monitor Pedestal Base 5

4. Using both hands on the outer edges of the display bezel, pull up gently on the monitor display

head (1) to extend the pedestal base (2) to the desired height.

CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-

uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover

to its normal condition.

Figure 3-2 Unfolding the Monitor Pedestal Base

6 Chapter 3 Setting Up the Monitor

Unfolding the Single-Hinged Monitor Pedestal Base

1. Lift the monitor from its box and place it face down on a flat surface covered by a soft, clean cloth.

2. Hold down the monitor display head with one hand and unfold the base 90 degrees with the other

hand.

CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-

uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its

normal condition.

Figure 3-3 Unfolding the Monitor Pedestal Base

Unfolding the Single-Hinged Monitor Pedestal Base 7

Rear Components

Figure 3-4 Rear Components

Component Function

1 AC Power Connector Connects the AC power cord to the monitor.

2 Audio In (select models) Connects the audio cable to the monitor's internal speakers

(select models)

3 USB Downstream

Connectors (2) (select

models)

Connects optional USB devices to the monitor.

4 USB Upstream

Connector (select

models)

Connects the USB hub cable to the monitor's USB hub

connector and to a host USB port/hub.

5 DVI (select models) Connects the DVI-D cable to the monitor.

6 VGA Connects the VGA cable to the monitor.

8 Chapter 3 Setting Up the Monitor

Cable Management

Use the cable management feature to secure and hide your cables when viewed from the front.

Before connecting the cables to the monitor on the L1710, L1910, and L1908w models, route the cables

through the hole in the center of the monitor stand.

Figure 3-5 Using the Cable Management Feature for L1710, L1910, and L1908w Models

After connecting the cables to the monitor on the L1750 and L1950 models, place the cables through

the cable management channels on the sides of the monitor base.

Figure 3-6 Using the Cable Management Feature for L1750 and L1950 Models

Cable Management 9

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Connect a VGA signal cable or DVI-D signal cable.

NOTE: For models with both VGA and DVI-D connectors, the monitor is capable of supporting

either analog or digital input. The video mode is determined by the video cable used. The monitor

will automatically determine which inputs have valid video signals. The inputs can be selected by

pressing the +/Input button on the front panel or through the On-Screen Display (OSD) feature by

pressing the Menu button.

●

For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to

the VGA connector on the rear of the monitor and the other end to the VGA connector on the

computer.

●

For digital operation, use the DVI-D signal cable provided (select models). Connect the DVI-

D signal cable to the DVI connector on the rear of the monitor and the other end to the DVI

connector on the computer.

Figure 3-7 Connecting the Signal Cable

3. Connect the built-in monitor speakers (on select models) to the computer using the audio cable.

10 Chapter 3 Setting Up the Monitor

4. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the

computer, and the other end to the upstream USB connector on the monitor (on select models).

Figure 3-8 Connecting the USB Cable

WARNING! To reduce the risk of electric shock or damage to the equipment:

Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

Disconnect power from the equipment by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may

accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the

electrical outlet, grasp the cord by the plug.

Connecting the Cables 11

5. Connect one end of the power cable to the AC power connector on the back of the monitor, and

the other end to an electrical wall outlet.

Figure 3-9 Connecting the Power Cable

Adjusting the Monitor

1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level.

Figure 3-10 Tilting the Monitor

12 Chapter 3 Setting Up the Monitor

2. Swivel the monitor to the left or right for the best viewing angle (select models).

Figure 3-11 Swiveling the Monitor

3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position

(select models).

Figure 3-12 Adjusting the Height

Adjusting the Monitor 13

4. Pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your

application (select models).

Figure 3-13 Pivoting the Monitor

NOTE: To view information on the screen in portrait mode, you will need to install the Pivot Pro

software included on the software and documentation CD. The position of the OSD menu can also

be rotated to portrait mode. To rotate the OSD menu, access the OSD menu, select Management,

then select OSD Control.

Turning on the Monitor

1. Press the power button on the computer to turn it on.

2. Press the power button on the front of the monitor to turn it on.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on

screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you

should always activate a screen saver application or turn off the monitor when it is not in use for a

prolonged period of time. Image retention is a condition that may occur on all LCD screens.

* A prolonged period of time is 12 consecutive hours of non-use.

NOTE: If pressing the power button has no effect, the Power Button Lock-out feature may be enabled.

To disable this feature, press and hold the monitor power button for 10 seconds.

14 Chapter 3 Setting Up the Monitor

Page is loading ...

HP (Hewlett-Packard) Car Video System L1750 User manual

Brand: HP (Hewlett-Packard)

Model: Car Video System L1750

Category: TVs & monitors

Type: User manual

Download PDF

report

HP (Hewlett-Packard) Car Video System L1750 User manual

HP (Hewlett-Packard) Car Video System L1750 User manual

Related papers

Other documents