Electrolux EHS8690X User manual

Type
User manual

Electrolux EHS8690X is a built-in hob with 4 cooking zones that allow for flexible use of different sized cookware and offer a wide range of cooking methods. Two triple-ring cooking zones with a diameter of 28 cm and power of 1050/1950/2700W provide fast heating and precise temperature control even for large pots. The multi-purpose zone with 1400/2200W can be used both for large pots and small pans, thanks to its two heating zones with a diameter of 21 and 15 cm. The double-ring zone with 700/1700W allows you to adjust the heating area to the size of the cookware, which saves energy.

Electrolux EHS8690X is a built-in hob with 4 cooking zones that allow for flexible use of different sized cookware and offer a wide range of cooking methods. Two triple-ring cooking zones with a diameter of 28 cm and power of 1050/1950/2700W provide fast heating and precise temperature control even for large pots. The multi-purpose zone with 1400/2200W can be used both for large pots and small pans, thanks to its two heating zones with a diameter of 21 and 15 cm. The double-ring zone with 700/1700W allows you to adjust the heating area to the size of the cookware, which saves energy.

Ceramic glass hob
Installation and Operating
Instructions
EHS8690X
822 930 196-A-191205-01
2
Dear Customer,
Please read these user instructions carefully and
keep them to refer to later.
Please pass the user instructions on to any future
owner of the appliance.
The following symbols are used in the
text:
1 Safety instructions
Warning! Information that affects your per-
sonal safety.
Important! Information that prevents damage
to the appliance.
3 Useful tips and hints
2 Environmental information
3
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching the outside ring on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4
Operating Instructions
1 Safety instructions
3
Please comply with these instructions. If you
do not, any damage resulting is not covered
by the warranty.
5 This appliance conforms with the following EU
Directives:
73/23/EEC dated 19.02.1973 Low Voltage Direc-
tive
89/336/EEC dated 03.05.1989 EMC Directive in-
clusive of Amending Directive 92/31/EEC
93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
This appliance should be used only for normal do-
mestic cooking and frying of food.
The appliance must not be used as a work surface
or as a storage surface.
Additions or modifications to the appliance are not
permitted.
Do not place or store flammable liquids, highly in-
flammable materials or fusible objects (e.g. plastic
film, plastic, aluminium) on or near the appliance.
Children’s safety
Small children must be kept away from the appli-
ance.
Only let bigger children work on the appliance un-
der supervision.
General safety
The appliance may only be installed and connect-
ed by trained, registered service engineers.
Built-in appliances may only be used after they
have built in to suitable built-in units and work sur-
faces that meet standards.
In the event of faults with the appliance or damage
to the glass ceramic (cracks, scratches or splits),
the appliance must be switched off and discon-
nected from the electrical supply, to prevent the
possibility of an electric shock.
Repairs to the appliance must only be carried out
by trained registered service engineers.
Safety during use
Remove stickers and film from the glass ceramic.
There is the risk of burns from the appliance if used
carelessly.
Cables from electrical appliances must not touch
the hot surface of the appliance or hot cookware.
Overheated fats and oils can ignite quickly. When
cooking with fat or oil (e.g. chips) do not leave the
appliance unattended.
Switch the cooking zones off after each use.
Safety when cleaning
For cleaning, the appliance must be switched off
and cooled down.
For safety reasons, the cleaning of the appliance
with steam jet or high-pressure cleaning equip-
ment is not permitted.
How to avoid damage to the appli-
ance
The glass ceramic can be damaged by objects fall-
ing onto it.
The edge of the glass ceramic can be damaged by
being knocked by the cookware.
Cookware made of cast iron, cast aluminium or
with damaged bottoms can scratch the glass ce-
ramic if pushed across the surface.
Objects that melt and things that boil over can
burn onto the glass ceramic and should be re-
moved straightaway.
To avoid damaging cookware and glass ceramics,
do not allow saucepans or frying pans to boil dry.
Do not use the cooking zones with empty cook-
ware or without cookware.
5
Description of the Appliance
Cooking surface layout
Control panel layout
Triple ring cooking zone
1050/1950/2700W
Multi-purpose zone
1400/2200W
Single cooking zone
1200W
Control panel Double ring cooking zone
700/1700W
On/Off
with power indicator
Timer display
Cooking zone indicators
Timer function
Outside ring
On/Off
Triple ring pilot light
Outside ring
On/Off
Heat setting selection
Display
Lock
Timer
Double ring pilot
light
Multi-purpose
zone pilot light
Middle /outside ring
On/Off
6
Touch Control sensor fields
The appliance is operated using Touch Control sen-
sor fields. Functions are controlled by touching sen-
sor fields and confirmed by displays and acoustic
signals.
Touch the sensor fields from above, without covering
other sensor fields.
Displays
Residual heat indicator
1 Warning! Risk of burns from residual heat. Af-
ter being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator
h .
3 Residual heat can be used for melting and
keeping food warm.
Sensor field Function
On / Off To switch the appliance on and off
Increase settings Increasing heat setting/time
Decrease settings Decreasing heat setting/time
Timer Timer selection
Lock Locking/unlocking the control panel
Triple ring switch To switch outer rings
on and off
Double ring switch Switches outside ring
on and off
Multi-purpose zone switch To switch the outside ring on and off
Display Description
¾ Cooking zone is switched off
u Keep warm setting Keep warm setting is set
¿ - Ç Heat settings Heat setting is set
a Automatic warm up function Automatic warm-up function is activated
e Fault Malfunction has occurred
h Residual heat Cooking zone is still hot
l Child safety device Lock/child safety device is engaged
_ Safety cut-out Safety cut-out has been activated
7
Operating the appliance
Switching the appliance on
and off
3 After switching on, within approx. 10 seconds
a heat setting or a function must be set, other-
wise the appliance automatically switches it-
self off.
Setting the heat setting
3 The keep warm setting u lies between ¾ and
¿. It is used to keep food warm.
Control panel Display Pilot light
Switch on Touch for 2 seconds
¾ / h lights up
Switch off Touch for 1 second
h / none goes out
Control panel Indicator
To increase Touch
u to Ç
To decrease Touch Ç to ¾
To switch off Touch and at the same time ¾
8
Switching the outside ring
on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware.
3 Before an outside ring can be switched on, the
inside ring must be switched on.
Locking/unlocking the con-
trol panel
The control panel, with the exception of the “On/Off”
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
3 When you switch the appliance off, the locking
function is automatically switched off.
Triple cooking zone Sensor panel Power indicator
To switch on middle ring Touch
for 1-2 seconds. One power indicator is lit.
To switch on outside ring Touch
for 1-2 seconds. Two power indicators are lit.
To switch off outside ring Touch
for 1-2 seconds. Second power indicator goes out.
To switch off middle ring Touch
for 1-2 seconds. First power indicator goes out.
Double ring cooking zone Sensor field Pilot light
To switch on outside ring Touch for 1-2 seconds is lit
To switch off outside ring Touch for 1-2 seconds goes out
Roasting zone Sensor panel Power indicator
To switch on outside ring Touch
for 1-2 seconds is lit
To switch off outside ring Touch for 1-2 seconds goes out
Control panel Display
Switch on Touch
l (for 5 seconds)
Switch off Touch previously set heat setting
9
Using the automatic warm-
up function
All cooking zones are equpped with an automatic
warm up function When setting a heat setting using
, when starting from
¾, the cooking zone switch-
es to full power for a certain amount of time and then
automatically switches back to the heat setting set.
3 If during the automatic warm up a a higher
heat setting is selected, e.g. from
Á to Ã, the
automatic warm up is adjusted.
3 If there is still residual heat on the cooking
zone (display
h), the automatic warm up is
not performed.
The length of time that the automatic warm up func-
tion operates depends on the heat setting selected.
Control panel possible heat set-
tings
Display
Switch on
(only when starting at
¾)
Touch
¿ to Æa (after 5 seconds)
Switch off Touch
Æ to ¿ / u Æ to u
Not used Touch Ç to to u
Heat
setting
Length of the automatic warm
up [min:sec]
Intermediate
heat setting
Length of the automatic warm
up [min:sec]
v 0:30
1 1:00
2 1:40 2. 2:40
3 4:50 3. 5:30
4 6:30 4. 8:10
5 10:10 5. 12:20
6 2:00 6. 2:30
7 3:30
8 4:30
9 ---
10
Using the child safety device
The child safety device prevents unintentional use of
the appliance.
Setting the child safety device
Releasing the child safety device
Overriding the child safety device
The child safety device can be released in this way
for a single cooking session; it remains activated af-
terwards.
Step Control panel Display/Signal
1. Switch on the appliance
(Do not set a heat setting)
¾
2. Touch until the signal sounds Acoustic signal
3. Touch
l
Appliance switches off. The child safety device is engaged.
Step Control panel Display/Signal
1.
Switch on the appliance l
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off. The child safety device is released.
Step Control panel Display/Signal
1. Switch on the appliance
l
2. Touch and at the same time
¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
11
Using the timer
All cooking zones can use each use one of the two
timer functions at the same time.
3 If a cooking zone is switched off, the timer
function set is also switched off.
3 If a heat setting is set on this cooking zone in
addition to a countdown timer, the cooking
zone is switched off after the time set has
elapsed.
Selecting a cooking zone
3 The heat setting indicator of the selected
cooking zone goes out, until the timer time is
set.
3 If the power indicator is flashing more slowly,
the heat setting indicator appears again and
the heat setting can be re-set or modified.
3 If other timer functions are set, after a few sec-
onds the shortest remaining time of all the tim-
er functions is displayed and the
corresponding pilot light flashes.
Function Condition Outcome after the time has
elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
Step Control panel Display
1. Touch once Pilot light of the first cooking zone flashes
2. Touch once Pilot light of the second cooking zone flashes
3. Touch once Pilot light of the third cooking zone flashes
4. Touch once Pilot light of the fourth cooking zone flashes
12
Setting the time
Switching off the Timer function
Changing the time
Displaying the time remaining for a cooking zone
Switching off the acoustic signal
Step Control panel field Display
1.
Select cooking zone Pilot light of the cooking zone selected flashes
2. Touch or for the cooking
zone selected
00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Step Control panel Display
1. Select a cooking zone Pilot light of the selected cooking zone flashes more quick-
ly.
Remaining time is displayed
2. Touch for the cooking zone
selected
The remaining time counts down to
00.
Simultaneoulsy touch
and
for the cooking zone selected
00 is displayed.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Step Control panel field Display
1.
Select cooking zone Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
2. Touch or for the cooking
zone selected
01 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Step Control panel field Display
1. Select cooking zone Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Step Control panel field Acoustic signal
1. Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
13
Safety cut-out
Cooking surface
If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
If one or more sensor fields are covered for longer
than approx. 10 seconds, e.g. by a pan placed
upon it, a signal sounds and the cooking surface
switches off automatically.
If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Cooking zones
If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally. _ is displayed. Before being used again, the
cooking zone must be set to 0.
Heat setting Switches off after
V, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
14
Tips on Cooking and Frying
3
Information on acrylamides
According to the latest scientific knowledge,
intensive browning of food, especially in prod-
ucts containing starch, can constitute a health
risk due to acrylamides. Therefore we recom-
mend cooking at the lowest possible tempera-
tures and not browning foods too much.
Cookware
You can recognise good cookware from the bot-
toms of the pans. The bottom should be as thick
and flat as possible.
Cookware made of enamelled steel or with alumin-
ium or copper bottoms can leave discolorations on
the glass ceramic surface which are difficult or im-
possible to remove.
Energy saving
2 Always place cookware on the cooking zone
before it is switched on.
2 If possible, always place lids on the pans.
2 Switch cooking zones off before the end of the
cooking time, to take advantage of residual
heat.
2 Bottom of pans and cooking zones should be
the same size.
15
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cooking-
process
suitable for Cooking time Tips/Hints
0 Residual heat, Off position
V
Keeping
food warm
Keeping cooked foods warm as required Cover
1-2
Melting
Hollandaise sauce,
melting butter, chocolate, gelatine
5-25 mins. Stir occasionally
Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on
2-3
Simmering
on low heat
Simmering rice and milk-based
dishes
Heating up ready-cooked meals
25-50 mins.
Add at least twice as much
liquid as rice, stir milk dishes
part way through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
braising meat
20-45 mins.
With vegetables add only a lit-
tle liquid (a few tablespoons)
4-5 Boiling
Steaming potatoes 20-60 mins.
Use only a little liquid, e. g.:
max.
¼ l water for
750 g potatoes
Cooking larger quantities of food,
stews and soups
60-150 mins.
Up to 3 l liquid plus ingredi-
ents
6-7
Gentle
Frying
Frying escalopes, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
Steady frying Turn halfway through cooking
7-8
Heavy
Frying
Hash browns, loin steaks, steaks,
Flädle (pancakes for garnishing
soup)
5-15 mins.
per pan
Turn halfway through cooking
9
Boiling
Searing
Deep frying
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),
deep frying chips
16
Cleaning and Care
1
Take care! Risk of burns from residual heat.
1 Warning! Sharp objects and abrasive cleaning
materials will damage the appliance. Clean
with water and washing up liquid.
1 Warning! Residues from cleaning agents will
damage the appliance. Remove residues with
water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little
washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an
angle.
2. Remove residues by sliding the blade over the sur-
face.
3. Wipe the appliance with a damp cloth and a little
washing up liquid.
4. Rub the appliance dry using a clean cloth.
*Scrapers and cleaners for glass ceramic and stainless steel
can be purchased in specialist shops
3 Remove stubborn residues with a cleaner for
glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.
Remove
Type of dirt
immedi-
ately
when the appliance has
cooled down
using
sugar, food containing sugar yes ---
a scraper*
plastics, tin foil yes ---
limescale and water rings --- yes
cleaner for glass ceramic
or stainless steel*
fat splashes --- yes
shiny metallic discolorations --- yes
17
What to do if
If you are unable to remedy the problem by fol-
lowing the above suggestions, please contact
your dealer or the Customer Care Department.
1 Warning! Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3 If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.
Problem Possible cause Remedy
The cooking zones will not switch
on or are not functioning
More than 10 seconds have passed
since the appliance was switched
on
Switch the appliance on again.
The child safety device is switched
on l
Deactivate the child safety device
(See the section “Child safety de-
vice”)
Several sensor fields were touched
at the same time
Only touch one sensor field
The sensor fields are partly covered
by a damp cloth or with liquid
Remove the cloth or the liquid.
Switch the appliance on again.
Safety cut-out has been triggered Switch the appliance on again
The lock is switched on l Switch off the lock (See the section
“Locking/unlocking the control
panel”)
The residual heat indicator is not
displaying anything
The cooking zone was only on for a
short time and is therefore not hot
If the cooking zone is supposed to
be hot, call the Customer Service
Department.
The automatic warm up function is
not switching itself on
There is still residual heat on the
cooking zone h
Let the cooking zone cool down
The highest heat setting is set Ç The highest heat setting has the
same power as the automatic warm
up function
The heat setting was set using the
sensor field
1.Switching off the cooking zone
2.Set the cooking zone using the
sensor field
Acoustic signal sounds and appli-
ance switches itself on and then off
again; after 5 seconds another
acoustic signal sounds
The On/Off sensor field has been
covered up, e.g. by a cloth
Do not place any objects on the
control panel
_ is lit Overheating protection for the
cooking zone has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
Safety cut-out has been triggered Switch off the cooking zone.
Switch the cooking zone on again
e and number are displayed Electronics fault Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house’s
wiring system)
If after switching on again,
e is dis-
played again, call the customer
service department
18
Disposal
2
Packaging material
The packaging materials are environmentally
friendly and can be recycled. The plastic com-
ponents are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging
materials in the appropriate container at the
community waste disposal facilities.
2 Old appliance
The symbol W on the product or on its pack-
aging indicates that this product may not be
treated as household waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is dis-
posed of correctly, you will help prevent po-
tential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed in-
formation about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
19
Installation Instructions
Safety instructions
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.)
Installation may only be carried out by a qualified
electrician.
The minimum distances to other appliances and
units are to be observed.
A protective floor must be installed under the ap-
pliance.
The cut surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work top with
no gap.
Do not use silicon sealant between the appliance
and the work top.
Avoid installing the appliance next to doors and un-
der windows. Otherwise hot cookware may be
knocked off the rings when doors and windows are
opened.
1 WARNING!
Risk of injury from electrical current.
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Observe connection schematic.
Observe electrical safety rules.
Ensure anti-shock protection through correct in-
stallation by a qualified electrician.
The appliance must be connected to the electrical
supply by a qualified electrician.
1 IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connec-
tions can make the terminal overheat.
Have the clamping joints correctedly installed by a
qualified electrician.
Use strain relief clamp on cable.
In the event of single-phase or two-phase connec-
tion, the appropriate mains cable of type H05BB-F
Tmax 90° (or higher) must be used.
If this appliance’s mains cable is damaged, it must
be replaced by a special cable (type H05BB-F
Tmax 90°; or higher). The latter is available from
the Customer Care Department.
A device must be provided in the electrical installa-
tion which allows the appliance to be disconnected
from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices include line protecting cut-
outs, fuses (screw type fuses are to be removed from
the holder), earth leakage trips and contactors.
20
Assembly
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Electrolux EHS8690X User manual

Type
User manual

Electrolux EHS8690X is a built-in hob with 4 cooking zones that allow for flexible use of different sized cookware and offer a wide range of cooking methods. Two triple-ring cooking zones with a diameter of 28 cm and power of 1050/1950/2700W provide fast heating and precise temperature control even for large pots. The multi-purpose zone with 1400/2200W can be used both for large pots and small pans, thanks to its two heating zones with a diameter of 21 and 15 cm. The double-ring zone with 700/1700W allows you to adjust the heating area to the size of the cookware, which saves energy.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI