International Concepts OT-17S Installation guide

International Concepts
Brand
International Concepts
Model
OT-17S
Type
Installation guide

International Concepts OT-17S is a sofa table that will surely complement a wide range of home décor. Its sturdy construction ensures that it will be a lasting piece in your home. The table can easily be assembled in 3 steps with the included Allen key and screws. The pre-drilled holes make assembly quick and easy. The given dimensions of the table are not very useful for judging the size, but it is likely that the table is of average size and will fit well in most living rooms. Overall, International Concepts OT-17S is a well-crafted sofa table that combines style and functionality.

International Concepts OT-17S is a sofa table that will surely complement a wide range of home décor. Its sturdy construction ensures that it will be a lasting piece in your home. The table can easily be assembled in 3 steps with the included Allen key and screws. The pre-drilled holes make assembly quick and easy. The given dimensions of the table are not very useful for judging the size, but it is likely that the table is of average size and will fit well in most living rooms. Overall, International Concepts OT-17S is a well-crafted sofa table that combines style and functionality.

ITEM NO: OT
-
17S
REVISED OCT 16
, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
:
TUS
C
AN SOFA TABLE
: OT-17S
ITEM NO: OT
-
17S
REVISED OCT 16
, 2014
Printed in Vietnam
- 2 -
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base.
PART
LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts.
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
A
Top 1
B
Bottom
panel
1
C
Leg 4
BEFORE ASSEMBLY
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
ITEM NO: OT
-
17S
REVISED OCT 16
, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Bolt
( M6 x 60mm)
12
2
Lock Washer
(6.5 x11mm)
12
3
Flat Washer
(6.5 x19mm)
12
4
Pan head screw
(M4 x 30 mm)
3
5
Knob
(38x30mm)
3
6
Allen key
(4X80mm)
1
STEP 1
Attach legs (C) to the top (A) with bolts (1) and washers (2) and (3) as shown below. Tighten with Allen
key (6).
ITEM NO: OT
-
17S
REVISED OCT 16
, 2014
Printed in Vietnam
- 4 -
STEP 2
Attach bottom panel (B) to legs (C) with bolts (1) and washers (2) and (3) as shown below. Tighten
with Allen key (6).
STEP 3
Attach knobs (5) to front of drawer with pan head screws (4). Tighten with the screwdriver
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

International Concepts OT-17S Installation guide

International Concepts
Brand
International Concepts
Model
OT-17S
Type
Installation guide

International Concepts OT-17S is a sofa table that will surely complement a wide range of home décor. Its sturdy construction ensures that it will be a lasting piece in your home. The table can easily be assembled in 3 steps with the included Allen key and screws. The pre-drilled holes make assembly quick and easy. The given dimensions of the table are not very useful for judging the size, but it is likely that the table is of average size and will fit well in most living rooms. Overall, International Concepts OT-17S is a well-crafted sofa table that combines style and functionality.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents