Sea gull lighting F2246/3ORB Installation guide

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulb not included.

1. Carefully thread fixture wire and ground wire through

fixture loop. Screw fixture loop onto top threaded

pipe until secure.

2. Follow enclosed supplement installation instructions

for electrical and fixture installation onto house outlet

box. If you do not have an outlet box at desired

location to attach the fixture than hire a qualified

electrician to create one.

3. A. Install brackets onto glass shade by fastening with a

flat washer and cap screw.

B. Install upper section of arms onto fixture by

fastening with cap nuts.

C. Install shade onto bottom end of arms by fastening

with cap screws.

4. Install light bulbs (not included). See label located at

socket area for type and maximum allowed wattage.

Assembly Instructions For

F2245/3, F2246/3

Fixture Loop

Cap Nut

Cap Screw

Bracket

Flat Washer

Fixture

Arm

Bulb (not included)

Socket

Shade

(E) 10/07