[Side Louver
Window
Approx. Dim.
L
62 L x 62 W
x 6 H cm /
24.4" L x 24.4"W x 2.4 H"
After
Sale Service
:cam:
C . Toll Free : (877) 627-8476
_.)
www.palramapplications.com
GIB
Please read these
instructions carefully before you start to
assemble this product.
Please carry out the steps
in the order set out in these instructions.
Keep these instructions
in a safe place for future reference.
If you don't have the
greenhouse assembly instructions, you can download it from
the following link:
http://www.palramapplications.com/assembly-instructions.
When encountering
the information icon, please refer to the relevant
assembly step for
additional comments and assistance.
This icon indicates
that the installer should be inside the greenhouse.
You will need
To assembly this product
(these items not supplied)
Safe,
Some parts may have
sharp edges. Please be careful when handling
IJ
components.
se Always wear gloves, eye
protection, and long sleeves when assembling
or performing any
maintenance on your product.
V To prevent injuries, do
not allow children to play under the greenhouse
during assembly.
Before Assembly
It is highly recommended to be assisted by a
second person in some steps.
Sort the parts and check according to the
contents parts list.
In case you bought the window kit along with
the greenhouse, please install the
kit along with the assembly of the
greenhouse and not after the greenhouse was
assembled.
This product is suitable for Palram's clear and
TwinWall greenhouses (not include
Snap&Grow Greenhouses).
This kit includes additive clear panel. If you
have a TwinWall panels
greenhouse, please remove the panel and
trim it accordingly as explained in
Steps 3.2 or 10.2
The kit can be assembled in every side
(including back side) of the
greenhouse except for panels that are next
to the greenhouse's corners.
(can be installed only in the back side in the
6x4 greenhouses)
Prior to the installation, several parts from
the greenhouse needs to be
dismantle, it is important to keep them in
order to use them later.
Please note that from Step 5, these
instructions refer to both types of
greenhouse's glazing.
Step 7 : in order to
assemble the window kit
in the back, it is
necessary to first dismantle part
of the greenhouse as
shown in Step 10.
Tighten all screws when completing
assembly.
Periodically check the kit components to
assure that it remains stable.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
3
1 . Clear GreenHouse 2. Twin wall GreenHouse
4
4
1
. Clear Green House
4
2. Twin wall Green House
,
)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
10
1 . Clear GreenHouse 2. Twin wall GreenHouse
4
11
1
. Clear GreenHouse
4
2. Twin wall GreenHouse
,
)
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
