DeWalt DCV100 User manual

Page is loading ...

B

Copyright

DeWALT

Dansk (oversat fra original brugsvejledning) 4

Deutsch (übersetzt von den originalanweisungen) 16

English (original instructions) 29

Español (traducido de las instrucciones originales) 40

Français (traduction de la notice d’instructions originale) 53

Italiano (tradotto dalle istruzioni originali) 66

Nederlands (vertaald vanuit de originele instructies) 79

Norsk (oversatt fra de originale instruksjonene) 92

Português (traduzido das instruções originais) 103

Suomi (käännetty alkuperäisestä käyttöohjeesta) 116

Svenska (översatt från de ursprungliga instruktionerna) 127

Türkçe (orijinal talimatlardan çevrilmiştir) 139

 (μετάφραση από τις πρωτότυπες οδηγίες) 151

Page is loading ...

29

english

Congratulations!

You have chosen a D

eWALT

tool. Years of experience, thorough product development and innovation make

DeWALT

one of the most reliable partners for professional power tool users.

Technical Data

DCV100

Voltage V

DC

18

Type 1

Battery type Li-Ion

Power output W 265

Air flow rate max m³/min 2.8

No load speed rpm 0-18000

Air speed max km/h 290

Weight (without battery pack) kg 1.3

Noise values and vibration values (triax vector sum) according to EN 60745-1:

L

PA

(emission sound pressure level) dB(A) 85

L

WA

(sound power level) dB(A) 96

K (uncertainty for the given sound level) dB(A) 3

Vibration emission value a

h

= m/s

2

<2,5

Uncertainty K = m/s

2

1,5

COMPACT HANDHELD BLOWER

DCV100

English (original instructions)

The vibration emission level given in this information

sheet has been measured in accordance with a

standardised test given in EN60745 and may be

used to compare one tool with another. It may be

used for a preliminary assessment of exposure.

WARNING: The declared vibration

emission level represents the main

applications of the tool. However if the

tool is used for different applications,

with different accessories or poorly

maintained, the vibration emission may

differ. This may significantly increase the

exposure level over the total working

period.

An estimation of the level of exposure to

vibration should also take into account

the times when the tool is switched off or

when it is running but not actually doing

the job. This may significantly reduce

the exposure level over the total working

period.

Identify additional safety measures to

protect the operator from the effects of

vibration such as: maintain the tool and

the accessories, keep the hands warm,

organisation of work patterns.

Battery pack DCB180 DCB181 DCB182

Battery type Li-Ion Li-Ion Li-Ion

Voltage V

DC

18 18 18

Capacity Ah 3.0 1.5 4.0

Weight kg 0.64 0.35 0.61

Battery pack DCB183/B DCB184/B DCB185

Battery type Li-Ion Li-Ion Li-Ion

Voltage V

DC

18 18 18

Capacity Ah 2.0 5.0 1.3

Weight kg 0.40/0.45 0.62/0.67 0.35

30

english

Charger DCB105

Mains voltage V

AC

230

Battery type 10.8/14.4/18 Li-Ion

Approx. charging time

of battery packs

min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)

55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)

Weight kg 0.49

Charger DCB107

Mains voltage V

AC

230

Battery type 10.8/14.4/18 Li-Ion

Approx. charging time

of battery packs

min 60 (1.3 Ah) 70 (1.5 Ah) 90 (2.0 Ah)

140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah)

Weight kg 0.29

Charger DCB112

Mains voltage V

AC

230

Battery type 10.8/14.4/18 Li-Ion

Approx. charging time

of battery packs

min 40 (1.3 Ah) 45 (1.5 Ah) 60 (2.0 Ah)

90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah)

Weight kg 0.36

Charger DCB113

Mains voltage V

AC

230

Battery type 10.8/14.4/18 Li-Ion

Approx. charging time

of battery packs

min 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah)

70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)

Weight kg 0.4

Charger DCB115

Mains voltage V

AC

230

Battery type 10.8/14.4/18 Li-Ion

Approx. charging time

of battery packs

min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)

55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)

Weight kg 0.5

Fuses:

Europe 230V tools 10 Amperes, mains

U.K. & Ireland 230V tools 3 Amperes, in plugs

Deﬁnitions: Safety Guidelines

The definitions below describe the level of severity

for each signal word. Please read the manual and

pay attention to these symbols.

DANGER: Indicates an imminently

hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING: Indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially

hazardous situation which, if not avoided,

may result in minor or moderate

injury.

NOTICE: Indicates a practice not

related to personal injury which, if

not avoided, may result in property

damage.

Denotes risk of electric shock.

Denotes risk of fire.

EC-Declaration of Conformity

MACHINERY DIRECTIVE

COMPACT HANDHELD BLOWER

DCV100

DeWALT

declares that these products described

under Technical Data are in compliance with:

2006/42/EC, EN60745-1:2009+A11:2010.

These products also comply with Directive

2004/108/EC (until 19.04.2016), 2014/30/EU (from

20.04.2016) and 2011/65/EU. For more information,

please contact

DeWALT

at the following address or

refer to the back of the manual.

The undersigned is responsible for compilation of

the technical file and makes this declaration on

behalf of

DeWALT

.

Markus Rompel

Director Engineering

DeWALT

, Richard-Klinger-Straße 11,

D-65510, Idstein, Germany

15.10.2015

WARNING: To reduce the risk of injury,

read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings

and all instructions. Failure to follow

the warnings and instructions may result

in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

31

english

used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off position before

connecting to power source and/or

battery pack, picking up or carrying the

tool. Carrying power tools with your finger

on the switch or energising power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating

part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper

footing and balance at all times. This

enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators. There

is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electric shock.

e) When operating a power tool outdoors,

use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric

shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the influence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection

32

english

• Do not place the inlet or outlet of the sweeper

near eyes or ears when operating. Never blow

debris in the direction of bystanders.

• Do not use in the rain or leave outdoors while it

is raining.

• Do not cross gravel paths or roads whilst your

product is switched on during blow mode.

Walk, never run.

• Do not place your unit down on gravel while it is

switched on.

• Always be sure of your footing, particularly

on slopes. Do not overreach and keep your

balance at all times.

• Do not place any objects into the openings.

Never use if the openings are blocked - keep

free of hair, lint, dust and anything that may

reduce the airflow.

• Do not allow debris to be ingested into blower

intake.

WARNING: Always use your product in

the manner outlined in this manual. Your

product is designed to be used in an

upright mode and if it is used in any other

way it may result in injury. Never run your

product whilst lying on it’s side or upside

down.

• The operator or user is responsible for

accidents or hazards occurring to other people

or their property.

• Do not use solvents or cleaning fluids to clean

your product. Use a blunt scraper to remove

grass and dirt.

• Replacement fans are available from a D

e

WALT

service agent. Use on D

e

WALT recommended

spare parts and accessories.

• Keep all nuts bolts and screws tight to make

sure that the appliance is in a safe working

condition.

SAFETY OF OTHERS

The appliance is only to be used with the power

supply unit provided with the appliance

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with these

instructions taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of fire when used with another

battery pack.

b) Use power tools only with specifically

designated battery packs. Use of any

other battery packs may create a risk of

injury and fire.

c) When battery pack is not in use, keep it

away from other metal objects like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Speciﬁc Safety Rules for

Handheld Blower

• To protect your feet and legs while operating

the appliance, always wear heavy duty footwear

and long trousers.

• Always switch off your product, allow the fan to

stop and remove the battery when:

• You leave your product unattended.

• Checking, adjusting, cleaning or working on

your product.

• If the appliance starts to vibrate abnormally.

33

english

• Before using charger, read all instructions and

cautionary markings on charger, battery pack,

and product using battery pack.

WARNING: Shock hazard. Do not allow

any liquid to get inside charger. Electric

shock may result.

WARNING: We recommend the use of

a residual current device with a residual

current rating of 30mA or less.

CAUTION: Burn hazard. To reduce

the risk of injury, charge only

DeWALT

rechargeable batteries. Other types of

batteries may burst causing personal

injury and damage.

CAUTION: Children should be

supervised to ensure that they do not

play with the appliance.

NOTICE: Under certain conditions,

with the charger plugged into the power

supply, the exposed charging contacts

inside the charger can be shorted by

foreign material. Foreign materials of

a conductive nature such as, but not

limited to, steel wool, aluminum foil or

any buildup of metallic particles should

be kept away from charger cavities.

Always unplug the charger from the

power supply when there is no battery

pack in the cavity. Unplug charger before

attempting to clean

• DO NOT attempt to charge the battery pack

with any chargers other than the ones in

this manual. The charger and battery pack are

specifically designed to work together.

• These chargers are not intended for

any uses other than charging

DeWALT

rechargeable batteries. Any other uses

may result in risk of fire, electric shock or

electrocution.

• Do not expose charger to rain or snow.

• Pull by plug rather than cord when

disconnecting charger. This will reduce risk

ofdamage to electric plug and cord.

• Make sure that cord is located so that it

will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

• Do not use an extension cord unless it

is absolutely necessary. Use of improper

extension cord could result in risk of fire,

electric shock, or electrocution.

• Do not place any object on top of charger

or place the charger on a soft surface that

might block the ventilation slots and result

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Injuries caused by touching any rotating/moving

parts.

– Injuries caused when changing any parts,

blades or accessories.

– Injuries caused by prolonged use of a tool.

When using any tool for prolonged periods

ensure you take regular breaks.

– Impairment of hearing.

– Health hazards caused by breathing dust

developed when using your tool (example:-

working with wood, especially oak, beech, MDF

and quartz in concrete dust.)

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Keep bystanders away.

SWITCH OFF: Remove battery before

cleaning or maintenance.

DATE CODE POSITION (FIG. 1)

The date code (X), which also includes the year of

manufacture, is printed into the housing.

Example:

2015 XX XX

Year of Manufacture

Important Safety Instructions for All

Battery Chargers

SAVE THESE INSTRUCTIONS: This manual

contains important safety and operating

instructions for compatible battery chargers (refer to

TechnicalData).

34

english

NOTE: To ensure maximum performance and life

of lithium-ion batteries, charge the battery pack fully

before first use.

Charging Process

Refer to the table below for the charge status of the

battery pack.

Charge indicators: DCB105

charging

fully charged

hot/cold pack delay

replace battery pack

Charge indicators: DCB107, DCB112, DCB113, DCB115

charging

fully charged

hot/cold pack delay*

*DCB107, DCB112, DCB113, DCB115: The

red light will continue to blink, but a yellow

indicator light will be illuminated during this

operation. Once the battery has reached an

appropriate temperature, the yellow light will turn

off and the charger will resume the charging

procedure.

The compatible charger(s) will not charge a faulty

battery pack. The charger will indicate faulty battery

by refusing to light or by displaying problem pack or

charger blink pattern.

NOTE: This could also mean a problem with a

charger.

If the charger indicates a problem, take the charger

and battery pack to be tested at an authorised

service centre.

HOT/COLD PACK DELAY

When the charger detects a battery that is too hot

or too cold, it automatically starts a Hot/Cold Pack

Delay, suspending charging until the battery has

reached an appropriate temperature. The charger

then automatically switches to the pack charging

mode. This feature ensures maximum battery life.

A cold battery pack will charge at about half the

rate of a warm battery pack. The battery pack will

charge at that slower rate throughout the entire

charging cycle and will not return to maximum

charge rate even if the battery warms.

LITHIUM-ION BATTERY PACKS ONLY

XR Li-Ion tools are designed with an Electronic

Protection System that will protect the battery

against overloading, overheating or deep discharge.

in excessive internal heat. Place the charger

in a position away from any heat source. The

charger is ventilated through slots in the top and

the bottom of the housing.

• Do not operate charger with damaged cord

or plug—have them replaced immediately.

• Do not operate charger if it has received

a sharp blow, been dropped, or otherwise

damaged in any way. Take it to an authorised

service centre.

• Do not disassemble charger; take it to an

authorised service centre when service or

repair is required. Incorrect reassembly may

result in a risk of electric shock, electrocution or

fire.

• In case of damaged power supply cord the

supply cord must be replaced immediately by

the manufacturer, its service agent or similar

qualified person to prevent any hazard.

• Disconnect the charger from the outlet

before attempting any cleaning. This will

reduce the risk of electric shock. Removing

the battery pack will not reduce this risk.

• NEVER attempt to connect two chargers

together.

• The charger is designed to operate on

standard 230V household electrical power.

Do not attempt to use it on any other

voltage. This does not apply to the vehicular

charger.

SAVE THESE INSTRUCTIONS

Chargers

The DCB105, DCB107, DCB112, DCB113 and

DCB115 chargers accept 10.8V, 14.4V and 18V

Li-Ion XR (DCB140, DCB141, DCB142, DCB143,

DCB144, DCB145, DCB180, DCB181, DCB182,

DCB183, DCB183B, DCB184 and DCB185) battery

packs.

DeWALT

chargers require no adjustment and are

designed to be as easy as possible to operate.

Charging Procedure (Fig. 2)

1. Plug the charger into an appropriate outlet

before inserting battery pack.

2. Insert the battery pack (F) into the charger.

The red (charging) light will blink continuously

indicating that the charging process has

started.

3. The completion of charge will be indicated by

the red light remaining ON continuously. The

pack is fully charged and may be used at this

time or left in the charger.

35

english

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM-ION

(LI-ION)

• Do not incinerate the battery pack even if it

is severely damaged or is completely worn

out. The battery pack can explode in a fire.

Toxic fumes and materials are created when

lithium-ion battery packs are burned.

• If battery contents come into contact with

the skin, immediately wash area with mild

soap and water. If battery liquid gets into the

eye, rinse water over the open eye for

15 minutes or until irritation ceases. If medical

attention is needed, the battery electrolyte

is composed of a mixture of liquid organic

carbonates and lithium salts.

• Contents of opened battery cells may cause

respiratory irritation. Provide fresh air. If

symptoms persists, seek medical attention.

WARNING: Burn hazard. Battery liquid

may be flammable if exposed to spark or

flame.

Transportation

DeWALT

batteries comply with all applicable

shipping regulations as prescribed by industry

and legal standards which include UN

Recommendations on the Transport of Dangerous

Goods; International Air Transport Association

(IATA) Dangerous Goods Regulations, International

Maritime Dangerous Goods (IMDG) Regulations,

and the European Agreement Concerning The

International Carriage of Dangerous Goods by Road

(ADR). Lithium-ion cells and batteries have been

tested to section 38.3 of the UN Recommendations

on the Transport of Dangerous Goods Manual of

Tests and Criteria.

In most instances, shipping a

DeWALT

battery pack

will be excepted from being classified as a fully

regulated Class 9 Hazardous Material. In general,

the two instances that require shipping Class 9 are:

1. Air shipping more than two

DeWALT

lithium-ion

battery packs when the package contains only

battery packs (no tools), and

2. Any shipment containing a lithium-ion battery

with an energy rating greater than 100 watt

hours (Wh). All lithium-ion batteries have the

watt hour rating marked on the pack.

Regardless of whether a shipment is considered

excepted or fully regulated, it is the shipper's

responsibility to consult the latest regulations for

packaging, labeling/marking and documentation

requirements.

The tool will automatically turn off if the Electronic

Protection System engages. If this occurs, place

the lithium-ion battery on the charger until it is fully

charged.

Important Safety Instructions for All

Battery Packs

When ordering replacement battery packs, be sure

to include catalog number and voltage.

The battery pack is not fully charged out of the

carton. Before using the battery pack and charger,

read the safety instructions below. Then follow

charging procedures outlined.

READ ALL INSTRUCTIONS

• Do not charge or use battery in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Inserting

or removing the battery from the charger may

ignite the dust or fumes.

• Never force battery pack into charger. Do

not modify battery pack in any way to fit into

a non-compatible charger as battery pack

may rupture causing serious personal injury.

• Charge the battery packs only in

DeWALT

chargers.

• DO NOT splash or immerse in water or other

liquids.

• Do not store or use the tool and battery

pack in locations where the temperature

may reach or exceed 40 ˚C (105 ˚F) (such as

outside sheds or metal buildings in summer).

WARNING: Never attempt to open the

battery pack for any reason. If battery

pack case is cracked or damaged,

do not insert into charger. Do not

crush, drop or damage battery pack.

Do not use a battery pack or charger

that has received a sharp blow, been

dropped, run over or damaged in any

way (i.e., pierced with a nail, hit with a

hammer, stepped on). Electric shock

or electrocution may result. Damaged

battery packs should be returned to

service centre for recycling.

CAUTION: When not in use, place

tool on its side on a stable surface

where it will not cause a tripping or

falling hazard. Some tools with large

battery packs will stand upright on the

battery pack but may be easily knocked

over.

36

english

Do not probe with conductive objects.

Do not charge damaged battery packs.

Do not expose to water.

Have defective cords replaced

immediately.

Charge only between 4 ˚C and 40 ˚C.

Only for indoor use.

Discard the battery pack with due care

for the environment.

Charge

DeWALT

battery packs only with

designated

DeWALT

chargers. Charging

battery packs other than the designated

DeWALT

batteries with a

DeWALT

charger may make them burst or lead to

other dangerous situations.

Do not incinerate the battery pack.

Package Contents

The package contains:

1 Blower

1 Extension attachment tube

1 End attachment tube

1 Inflator/Deflator attachment

1 Instruction manual

• Check for damage to the tool, parts or

accessories which may have occurred

during transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (Fig. 1)

WARNING: Never modify the power

tool or any part of it. Damage or personal

injury could result.

A. Extension attachment

B. End attachment

C. Trigger switch

D. Lock-on button

E. 3-speed toggle switch

Transporting batteries can possibly cause fire if the

battery terminals inadvertently come in contact with

conductive materials. When transporting batteries,

make sure that the battery terminals are protected

and well insulated from materials that could contact

them and cause a short circuit.

The information provided in this section of the

manual is provided in good faith and believed to be

accurate at the time the document was created.

However, no warranty, expressed or implied, is

given. It is the buyer’s responsibility to ensure that its

activities comply with the applicable regulations.

Battery Pack

BATTERY TYPE

The DCV100 operates on a 18 volt battery pack.

The DCB180, DCB181, DCB182, DCB183/B,

DCB184/B or DCB185 battery packs may be used.

Refer to Technical Data for more information.

Storage Recommendations

1. The best storage place is one that is cool and

dry away from direct sunlight and excess heat

or cold. For optimum battery performance and

life, store battery packs at room temperature

when not in use.

2. For long storage, it is recommended to store a

fully charged battery pack in a cool, dry place

out of the charger for optimal results.

NOTE: Battery packs should not be stored

completely depleted of charge. The battery pack will

need to be recharged before use.

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual,

the labels on the charger and the battery pack may

show the following pictographs:

Read instruction manual before use.

See Technical Data for charging time.

Battery charging.

Battery charged.

Battery defective.

Hot/cold pack delay.

37

english

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless

absolutely necessary. Use an approved extension

cable suitable for the power input of your charger

(see Technical Data). The minimum conductor size

is 1 mm

2

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

serious personal injury, turn tool

off and disconnect battery pack

before making any adjustments or

removing/installing attachments or

accessories. An accidental start-up can

cause injury.

WARNING: Use only

DeWALT

battery

packs and chargers.

Inserting and Removing the

Battery Pack from the Tool (Fig. 2)

NOTE: Make sure your battery pack (F) is fully

charged.

TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE

1. Align the battery pack (F) with the rails inside

the tool’s handle (Fig. 2).

2. Slide it into the handle until the battery pack is

firmly seated in the tool and ensure that you

hear the lock snap into place.

TO REMOVE THE BATTERY PACK FROM THE TOOL

1. Press the release buttons (G) and firmly pull the

battery pack out of the tool handle.

2. Insert battery pack into the charger as

described in the charger section of this manual.

FUEL GAUGE BATTERY PACKS (FIG. 2)

Some

DeWALT

battery packs include a fuel gauge

which consists of three green LED lights that

indicate the level of charge remaining in the battery

pack.

F. Battery

G. Battery release button

H. Inflator/Deflator attachment

I. Intake

INTENDED USE

This cordless compact blower is designed for

professional blowing applications e.g. blowing of

woodchip and other large particle debris. Do not

use in applications where dust is present which

is a classified hazardous substance, or contains

hazardous substances like quartz in concrete dust,

hard wood dust etc.

DO NOT use under wet conditions or in the

presence of flammable liquids or gases.

The compact handheld blower is a professional

power tool.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

• Young children and the infirm. This appliance

is not intended for use by young children or

infirm persons without supervision.

• This product is not intended for use by persons

(including children) suffering from diminished

physical, sensory or mental abilities; lack of

experience, knowledge or skills unless they are

supervised by a person responsible for their

safety. Children should never be left alone with

this product.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the battery pack

voltage corresponds to the voltage on the rating

plate. Also make sure that the voltage of your

charger corresponds to that of your mains.

Your

DeWALT

charger is double insulated

in accordance with EN60335; therefore

no earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen

between the primary and secondary

winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DeWALT

service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

38

english

Proper Hand Position (Fig. 7)

WARNING: To reduce the risk of serious

personal injury, ALWAYS use proper

hand position as shown.

WARNING: To reduce the risk of serious

personal injury, ALWAYS hold securely in

anticipation of a sudden reaction.

Proper hand position requires one hand on the

extension attachment (A), with the other hand on

the main handle. Refer to figure 7.

Switching On (Fig. 6, 8)

CAUTION: Do not point unit

discharge at self or bystanders.

CAUTION: Always wear safety glasses

and hearing protection. Wear a filter

mask if the operation is dusty. Use

of gloves, long pants and substantial

footwear is recommended. Keep long

hair and loose clothing away from

openings and moving parts.

To turn the blower on, depress the variable speed

trigger (C). As trigger is pulled from min to max

position (or full off to full on), the airflow from the

blower will increase from min to max. Release the

trigger fully to turn the blower off.

To lock the blower on, press the lock-on button (D)

with the variable speed trigger (C) depressed, as

shown in figure 6. To turn the blower off when using

the lock-on button, pull the trigger to release the

lock.

Hold the blower with both hands, and sweep

from side to side with tube output end several

centimetres above the hard surface. Slowly advance

keeping the accumulated pile of debris in front of

you. Refer to Proper Hand Position.

Speed selection (Fig. 8)

The 3 speed toggle switch (E) sets the maximum

airflow that can be achieved when trigger is fully

depressed. Push the toggle switch (E) up to

increase air flow; push it down to decrease air flow.

MAINTENANCE

Your

DeWALT

power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular

cleaning.

WARNING: To reduce the risk of

serious personal injury, turn tool

off and disconnect battery pack

before making any adjustments or

To actuate the fuel gauge, press and hold the fuel

gauge button (L). A combination of the three green

LED lights will illuminate designating the level of

charge left. When the level of charge in the battery

is below the usable limit, the fuel gauge will not

illuminate and the battery will need to be recharged.

NOTE: The fuel gauge is only an indication of the

charge left on the battery pack. It does not indicate

tool functionality and is subject to variation based

on product components, temperature and end-user

application.

Attachments (Fig. 3–5)

CAUTION: Ensure the battery is

removed before attaching or removing

extension attachment (A) or end

attachment (B). A attachment must be

attached to the housing before use.

BLOWER

To connect the extension attachment, end

attachment or inflator/deflator attachment to the

blower outlet:

1. Line up the pegs (J) on the inside of the

attachement with the notches (K) of the housing

opening as shown in figure3.

2. Push the attachment onto the blower housing

and turn left to lock. Pull on the attachment to

ensure it is securely in place.

3. To remove the attachment, turn right to unlock

and pull it off of the blower housing.

DEFLATOR

To connect the inflator/deflator attachment (H) to the

deflator intake (I):

Line up the detents on the attachment with the

notches on the top, bottom and sides of the intake

and press it onto the intake (I).

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk of

serious personal injury, turn tool

off and disconnect battery pack

before making any adjustments or

removing/installing attachments or

accessories. An accidental start-up can

cause injury.

39

english

Protecting the Environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your

DeWALT

product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection

of electrical products from the household, at

municipal waste sites or by the retailer when you

purchase a new product.

DeWALT

provides a facility for the collection and

recycling of

DeWALT

products once they have

reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

DeWALT

office at the address indicated in this

manual. Alternatively, a list of authorised

DeWALT

repair agents and full details of our after-sales

service and contacts are available on the Internet at:

www.2helpU.com.

Rechargeable Battery Pack

This long life battery pack must be recharged when

it fails to produce sufficient power on jobs which

were easily done before. At the end of its technical

life, discard it with due care for our environment:

• Run the battery pack down completely, then

remove it from the tool.

• Lithium-ion cells are recyclable. Take them to

your dealer or a local recycling station. The

collected battery packs will be recycled or

disposed of properly.

removing/installing attachments or

accessories. An accidental start-up can

cause injury.

The charger and battery pack are not serviceable.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

CHARGER CLEANING INSTRUCTIONS

WARNING: Shock hazard. Disconnect

the charger from the AC outlet before

cleaning. Dirt and grease may be

removed from the exterior of the charger

using a cloth or soft non-metallic brush.

Do not use water or any cleaning

solutions.

Optional Accessories

WARNING: Since accessories, other

than those offered by

DeWALT

, have not

been tested with this product, use of

such accessories with this tool could be

hazardous. To reduce the risk of injury,

only

DeWALT

recommended accessories

should be used with this product.

Consult your dealer for further information on the

appropriate accessories.

Page is loading ...

Belgique et

Luxembourg België

en Luxemburg

DeWALT - Belgium BVBA

Egide Walschaertsstraat 16

2800 Mechelen

Tel: NL 32 15 47 37 63

Tel: FR 32 15 47 37 64

Fax: 32 15 47 37 99

www.dewalt.be

enduser[email protected]

Danmark DeWALT

Roskildevej 22

2620 Albertslund

Tel: 70 20 15 10

Fax: 70 22 49 10

www.dewalt.dk

[email protected]

Deutschland DeWALT

Richard Klinger Str. 11

65510 Idstein

Tel: 06126-21-1

Fax: 06126-21-2770

www.dewalt.de

[email protected]

Ελλάς DeWALT (Ελλάς) Α.Ε.

EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7

& Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα

SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) –

193 00 Ασπρόπυργος

Τηλ: 00302108981616

Φαξ: 00302108983570

www.dewalt.gr

[email protected]

España DeWALT Ibérica, S.C.A.

Parc de Negocios “Mas Blau”

Edificio Muntadas, c/Bergadá, 1, Of. A6

08820 El Prat de Llobregat (Barcelona)

Tel: 934 797 400

Fax: 934 797 419

www.dewalt.es

respuesta.postventa@sbdinc.

com

France DeWALT

5, allée des Hêtres

BP 30084, 69579 Limonest Cedex

Tel: 04 72 20 39 20

Fax: 04 72 20 39 00

www.dewalt.fr

[email protected]

Schweiz

Suisse

Svizzera

DeWALT

In der Luberzen 42

8902 Urdorf

Tel: 044 - 755 60 70

Fax: 044 - 730 70 67

www.dewalt.ch

[email protected]

Ireland DeWALT

Calpe House Rock Hill

Black Rock, Co. Dublin

Tel: 00353-2781800

Fax: 00353-2781811

www.dewalt.ie

Italia DeWALT

via Energypark

20871 Vimercate (MB), IT

Tel: 800-014353

39 039 9590200

Fax: 39 039 9590313

www.dewalt.it

Nederlands DeWALT Netherlands BV

Holtum Noordweg 35

6121 RE BORN, Postbus 83, 6120 AB BORN

Tel: 31 164 283 063

Fax: 31 164 283 200

www.dewalt.nl

Norge DeWALT

Postboks 4613, Nydalen

0405 Oslo

Tel: 45 25 13 00

Fax: 45 25 08 00

www.dewalt.no

[email protected]

Österreich DeWALT

Werkzeug Vertriebsges m.b.H

Oberlaaerstrasse 248, A-1230 Wien

Tel: 01 - 66116 - 0

Fax: 01 - 66116 - 614

www.dewalt.at

[email protected]

Portugal DeWALT Limited, SARL

Centro de Escritórios de Sintra Avenida

Almirante Gago Coutinho, 132/134, Edifício 14

2710-418 Sintra

Tel: 214 66 75 00

Fax: 214 66 75 80

www.dewalt.pt

[email protected]

Suomi DeWALT

PL 47

00521 Helsinki

Puh: 010 400 4333

Faksi: 0800 411 340

www.dewalt.fi

[email protected]

Sverige DeWALT

Box 94

431 22 Mölndal

Tel: 031 68 61 60

Fax: 031 68 60 08

www.dewalt.se

[email protected]

Türkiye

KALE Hırdavat ve Makina A.Ş.

Defterdar Mah. Savaklar Cad. No:15

Edirnekapı / Eyüp / İSTANBUL 34050

TÜRKİYE

Tel: 0212 533 52 55

Faks: 0212 533 10 05

www.dewalt.com.tr

United

Kingdom

DeWALT, 210 Bath Road;

Slough, Berks SL1 3YD

Tel: 01753-567055

Fax: 01753-572112

www.dewalt.co.uk

[email protected]

Australia DeWALT

82 Taryn Drive, Epping

VIC 3076 Australia

Tel: Aust 1800 338 002

Tel: NZ 0800 339 258

www.dewalt.com.au

www.dewalt.co.nz

Middle East Africa DeWALT

P.O. Box - 17164,

Jebel Ali Free Zone (South), Dubai, UAE

Tel: 971 4 812 7400

Fax: 971 4 2822765

www.dewalt.ae

[email protected]

N434879 08/15

DeWalt DCV100 User manual

DeWalt DCV100 User manual

in other languages

Related papers

Other documents