Swann DVR4-1000 Easy Setup Manual

DVR4-1000
Swann
Brand
Swann
Model
DVR4-1000
Category
Digital Video Recorders (DVR)
Type
Easy Setup Manual

Swann DVR4-1000 is a powerful digital video recorder that allows you to monitor and record footage from security cameras. With its easy setup process, you can have your surveillance system up and running in minutes. The DVR4-1000 supports up to 4 cameras, providing extensive coverage for your property. You can connect the DVR to your TV via the RCA cable provided to view live footage or playback recorded videos. The DVR also features motion recording, allowing you to save storage space by only recording when motion is detected.

Swann DVR4-1000 is a powerful digital video recorder that allows you to monitor and record footage from security cameras. With its easy setup process, you can have your surveillance system up and running in minutes. The DVR4-1000 supports up to 4 cameras, providing extensive coverage for your property. You can connect the DVR to your TV via the RCA cable provided to view live footage or playback recorded videos. The DVR also features motion recording, allowing you to save storage space by only recording when motion is detected.

www.swannsecurity.comSwann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: [email protected]
DVR4-1000 - Easy Setup Guide
Connecting the DVR to TV
C
Back of DVR
Back of TV
INPUT
Connect the yellow
RCA cable to an INPUT
on the back of your TV
1
Connect the BNC end
of the cable to the top
VIDEO INPUT on DVR
2
Tune your TV to the
correct INPUT - this is
sometimes labelled A/V,
input, source, L1, L2, etc.
- consult TV manual for details
3
B
Camera Connections
Connect the camera
cables to the Extension
Cables
Cameras Optional
1
Connect all power ends
of Extension cables to
the Power Splitters
3
Connect Power
Splitter to Camera
Power Adapters
4
Plug in Camera Power
Adpaters and DVR
Adapter to outlets
5
Connect BNC Extension
to back of DVR in ports
marked Video Input
2
Package Contents
A
BNC to
RCA Cable
Software CD
Power Adapter
Cable
Cameras and Accessories Optional
ManualsRemote
Control
Packaging
USB Cable Security
Stickers
DVR Power
Adapter
DVR4-1000 Unit
Questions & AnswersSetting Motion Sensitivity
Q: Why do I get a “Hard Drive Detect Error?”
A: Make sure you are using the correct power supply for your DVR. The DVR should not share power with cameras or any
other device and should be connected directly to the DVR. The DVR4-1000 power supply is the larger ‘brick’ power
supply described on the reverse of this document.
Q: Why can’t I access the menu?
A: In order to enter the menu system be sure to stop all recordings, playback, timers etc. by pressing the STOP button.
Then press the menu button to access the settings.
Q: Can I view my cameras and record while the DVR is connected to my PC?
A: No, when the DVR is connected to a PC it enters USB or mass storage mode. While in this mode you will can access your
recordings and backup to your computer but you can not record or view live images from your camera. When the USB
cable is disconnected from the DVR it will return to live camera view and full access will be restored.
To change the sensitivity of motion recording go to
‘MENU > MOTION SETUP’ - Each camera has
a separate sensitivity level. 9 is most sensitve down
to 0 which is off
A B
Setting the Record Schedule and Motion Recording
1. Push the MENU button to bring up the menu
2. Move the cursor to ‘Record Schedule’ using
the DOWN arrow and press ENTER
3. Move the cursor using the LEFT/RIGHT
buttons. Press the UP/DOWN Arrows to
change the record mode
Note: Schedule based
‘T’ =Normal Record, ‘M’ =Motion Record, ‘-’ =No Record
on 24 hour clock
Front Panel
1. USB Port
2. Up Arrow/CH1
3. Down Arrow/CH2
4. Right Arrow/CH3
5. Left Arrow/CH4
6. Menu/Previous Menu
7. Remote IR Sensor
8. Power LED
9. HDD LED
10. Play/Pause
11. Reverse
12. Forward/
Auto Switching
13. Record/Stop
DVR4-1000 Basic Settings Easy Setup Guide
www.swannsecurity.com
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, 1-877-274-3695, Australia - 1300 13 8324 • Email: [email protected]
  • Page 1 1
  • Page 2 2

Swann DVR4-1000 Easy Setup Manual

DVR4-1000
Swann
Brand
Swann
Model
DVR4-1000
Category
Digital Video Recorders (DVR)
Type
Easy Setup Manual

Swann DVR4-1000 is a powerful digital video recorder that allows you to monitor and record footage from security cameras. With its easy setup process, you can have your surveillance system up and running in minutes. The DVR4-1000 supports up to 4 cameras, providing extensive coverage for your property. You can connect the DVR to your TV via the RCA cable provided to view live footage or playback recorded videos. The DVR also features motion recording, allowing you to save storage space by only recording when motion is detected.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers