Acer P5206 Quick start guide

Type
Quick start guide

This manual is also suitable for

INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model's specifications
1
MIC.
RS232
RBG
RBG
HDTV adapter
D-Sub
D-Sub
7
D-Sub
D-Sub
2
6
4
5
2
1
Y
5
R
W
98
3
Y
10
10
11
USB
USB
DC OUT
12
2
MIC.
DC OUT
E62405SP
R
P5206/N216/PN-X14/
S5201/T111/PS-X11
P5_S5qs.fm Page 3 Monday, December 27, 2010 5:41 PM
INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model's specifications
1
MIC.
RS232
RBG
RBG
HDTV adapter
D-Sub
D-Sub
13
7
D-Sub
D-Sub
2
6
4
5
2
1
Y
5
R
W
98
3
Y
10
10
11
USB
USB
DC OUT
12
2
MIC.
DC OUT
E62405SP
R
S5201B/T111E/PS-X11K/
S5301WB/T121E/PS-W11K
P5_S5qs.fm Page 4 Monday, December 27, 2010 5:41 PM
Quick Start
INSTALLATION
1. Power cord
2. VGA cable
3. VGA to component video/HDTV
adapter
4. Composite video cable
5. Audio cable
6. S-Video cable
7. RS232 cable
8. HDMI cable
9. 3 RCA component cable
10. RJ45 cable
11. USB cable
12. 12V DC cable
13. USB storage device/USB Wifi adapter
(Optional)
Note: Connector interface is subject to model's specifications
INTERFACE CONNECTOR
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable to
the "VGA IN 1" or "VGA IN 2"
connector on the projector; connect
the other end to the VGA connector
on the computer and tighten the
screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run your presentation.
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fans shut
down.
Start Cepat
INSTALASI
1. Kabel daya
2. Kabel VGA
3. VGA ke video komponen/adaptor
HDTV
4. Kabel video gabungan
5. Kabel audio
6. Kabel S-Video
7. Kabel RS232
8. Kabel HDMI
9. 3 Kabel komponen RCA
10. Kabel RJ45
11. Kabel USB
12. Kabel DC 12V
13. Perangkat penyimpanan USB/
Adaptor Wifi USB (Opsional)
Catatan: Antarmuka penghubung untuk spesifikasi model
PENGHUBUNG ANTARMUKA
1. Pastikan proyektor dan komputer
Anda mati.
2. Sambungkan salah satu ujung kabel
VGA ke konektor "VGA IN 1" atau
"VGA IN 2" di proyektor;
hubungkan ujung kabel yang lain ke
penghubung VGA pada komputer
dan kencangkan sekrup.
3. Hubungkan salah satu ujung kabel
daya ke dalam soket daya AC pada
proyektor; hubungkan ujung kabel
yang lain ke outlet elektrik.
1. Lepaskan tutup lensa.
2. Hidupkan proyektor dahulu,
kemudian komputer.
3. Sesuaikan posisi, fokus dan zum.
4. Jalankan presentasi Anda.
1. Tekan tombol daya (power) dua kali.
2. Jangan pindahkan kabel daya AC
dari stop kontak hingga kipas
proyektor mati.
1
2
Connecting to a Computer
Powering On the Projector
Powering Off the Projector
1
2
Menghubungkan ke Komputer
Pemberian Daya pada Proyektor
Memutus Daya pada Proyektor
English Bahasa Indonesia
P5_S5qs.fm Page 5 Monday, December 27, 2010 5:41 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Acer P5206 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI