Storability 1735 Installation guide

Installation & Assembly Instructions

Please contact our Customer Service Division with any questions at:

30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ support@tritonproducts.com

For a full line of products visit www.tritonproducts.com 1 INS3524

Read all instructions completely before installing. Should you have any questions about your

installation, please call Customer Service at 440-248-5480. Missing and damaged parts must be

reported within 5 days from receipt of delivery.

Tools needed for this installation (not supplied with kit) – Phillips Screwdriver

Parts Listing

Part Number Quantity Description

1735 1 10pc LocHook Assortment

(This kit contains 10 total hooks made-up of; 3 different sizes of spring clips, 2 curved hooks, 2 double rod

hooks, 2 single rod hooks and 1 closed end pliers/wrench holder)

Each hook will mount directly onto Triton model 1705 Steel LocBoard with square holes (not included)

Accessory Installation: (See image below) Insert hook’s back lock tabs into square holes in steel LocBoards

and slide into place. Insert special LocScrew into lower screw holes in hook’s mounting plate using Phillips

screwdriver. Each screw will catch one side of the square hole and lock to the board so there is never

damage to the board when repositioning the hooks. Removal of LocScrews will allow for hooks to be

repositioned horizontally or vertically.

1735 Storability® 10 pc LocHook™ Assortment for LocBoard®

Download PDF