Mantis CTTLS-01 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Mantis CTTLS-01 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly & Mounting Instructions
Dear Friend,
Thank you
for
purchasing the new Cascade
Gardens
Adjustable Height Trellis.
Constructed of durable, powder-coated steel and UV protected plastic
components,
your
trellis was designed to last for years.
Before you start:
1.
Your indoor/outdoor trellis includes wood screws. Choose the location and
determine if you will need additional mounting hardware for
hollow-wall,
metal or
masonry.
2.
Make sure the location is ideal for plant growth - sun or shade.
3. Identify each component on the parts list.
4.
Tools you
will
need:
scissors, Phillips-head screwdriver & tape measure.
5. This product carries a
1
-year limited warranty against
defects
in material or workmanship
from the date of purchase.
If you
have any questions or need assistance,
please
contact
customer service at
1-888-820-5114.
^
r
JU
C
j
S
c!ideCarde
0s
!
Adjustable ^ Tivllises
Package
Contents
Item
1
2
3
4
5
6
7
8
Parts Description
Upper male cord lock
Upper female cord lock
Lower male cord lock
Lower female cord lock
Mounting bracket
Weight bar
Cords
Wood
screws
Quantity
5
5
5
5
1
1
5
2
Step-1.
Mounting Bracket
Install at desired height
with
Phillips head
screwdriver and provided screws. Please
note the maximum distance from the bottom
of the mounting bracket to the ground is 74
inches.
Step-2.
Upper cord lock assembly
Install cords into upper cord locks
and tighten by screwing together.
•Step-3.
Install one cord lock assembly
from step-1 into mounting bracket.
Bottom of Mounting Bracket
(
Note:
Leave
cord
just inside top hole.)
Cascade
Gardens
adjustable
Height Trellises
834 Freedom Road
ancaster,
PA 17601
-OVER-
Patent Pending
©
PBM,
Group, Inc. 2009
Step-4.
Install weight bar and lower cord lock (tighten
half
way).
Raise lower cord lock roughly 2
inches above ground and tighten.
2 Inches
Step-5.
Install cord lock assembly on other side,
making sure weight bar is level.
•Ill
III
Step-7.
Cut cords flush with bottom of cord locks.
Step-6.
Add three remaining cord lock assemblies.
Step-8.
Planting - Flower
and
Vegetable Vines
Seeds - Sow evenly on either side of
weight bar. Plants - Plant directly under
center of weight bar and place vines on
either side of trellis.
If required, holes can be used for
ground anchors for larger plants.
L
i
tr-a i i nv.ja
2 inches
wmm
Ground
Lamp post model &
future designs
coming
soon.
/