2. ATEN
  3. EA1442

ATEN EA1442 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ATEN EA1442 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
EA1442 Reed Door Sensor
1 Switch
1 Magnet
D+ Ground
Use the adhesive tape to secure one sensor to the door, and the other
sensor to the rack frame so that when the door is closed the two meet flush
but do not obstruct the doors ability to close completely. The sensors can be
installed on the inside or outside of the frame, as long as they do not prevent
the door from closing and the two flat ends meet. Connect a wire to the D+
port and a wire to the Ground port on the energy box or eco PDU, as shown
below.
/