Henny Penny ODS-100 Datasheet

Type
Datasheet

Henny Penny ODS-100 simplifies the messy task of draining, transporting, and disposing of spent frying oil. It boasts a large 100 lb. capacity, handling most fryer vats in one go. The powerful manual pump empties the reservoir in under two minutes. The ODS-100 features a pump-out hose with quick-connect fittings, making it compatible with both open and pressure fryers. Its tall reservoir design ensures stability during transport, while the easy-grip retainer screw locks the swing pipe in any position for convenient oil discharge.

Henny Penny ODS-100 simplifies the messy task of draining, transporting, and disposing of spent frying oil. It boasts a large 100 lb. capacity, handling most fryer vats in one go. The powerful manual pump empties the reservoir in under two minutes. The ODS-100 features a pump-out hose with quick-connect fittings, making it compatible with both open and pressure fryers. Its tall reservoir design ensures stability during transport, while the easy-grip retainer screw locks the swing pipe in any position for convenient oil discharge.

18 1/2 in. (470 mm)
37 1/2 in.
(953 mm)
43 1/4 in.
(1099 mm)
MODEL ODS-100
© 2010 Henny Penny Corporation, Eaton, OH 45320 USA Revised 10.26.10
PROJECT QUANTITY ITEM NO
ODS-100 fryer oil disposal system
Fryer oil disposal system
General Information
The unappealing job of draining,
transporting and disposing of spent
frying oil becomes much easier with
the Henny Penny ODS-100.
Just drain spent oil into fryer filter
pan, attach ODS-100 hose to fryer
filter rinse hose connection and
switch on fryer pump. Oil pumps
directly into 100 lb. capacity
reservoir. Easily transports on two
large 7 in. (178 mm) rear wheels.
One piece discharge pipe swings
out to either side for convenience. A
powerful manual pump is located at
the ideal height, so pump-out is fast
and easy.
Pump-out hose connects to
pressure fryers and open fryers.
Dimensions
Width 18 1/2 in. (470 mm)
Depth 20 1/8 in. (511 mm)
Height 43 1/4 in. (1099 mm)
Height
to discharge 37 1/2 in. (953 mm)
Height
top of swing arm 42 in. (1067 mm)
Required clearances N/A
Crated dimensions: Contact Henny Penny
Net weight: N/A
Crated weight: 66 lbs. (30 kg)
Capacity, oil: 100 lbs. (45.4 kg)
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
Continuing product improvement may subject specifications to change without notice.
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
20 1/8 in. (511 mm)
Standard Features
Large 100 lb. (45 kg) capacity
handles most fryer vats in one load.
Pump-out hose with male and female
quick-connect fittings—simply
reverse pump-out hose to service
open fryers and pressure fryers.
Powerful manual pump empties 100
lbs. (45 kg) of oil in less than two
minutes.
Tall reservoir design offers small
footprint and transport stability.
Check valve insures consistent
priming.
One-piece discharge pipe swings at
height to clear most containers.
Easy-grip retainer screw locks swing
pipe into any convenient position.
Hinged access lid for easy
cleaning—latches and seals to
prevent spills.
Large 7 in. (178 mm) rear wheels for
smooth, stable transport.
42 in.
(1067 mm)
Flexible hose
  • Page 1 1

Henny Penny ODS-100 Datasheet

Type
Datasheet

Henny Penny ODS-100 simplifies the messy task of draining, transporting, and disposing of spent frying oil. It boasts a large 100 lb. capacity, handling most fryer vats in one go. The powerful manual pump empties the reservoir in under two minutes. The ODS-100 features a pump-out hose with quick-connect fittings, making it compatible with both open and pressure fryers. Its tall reservoir design ensures stability during transport, while the easy-grip retainer screw locks the swing pipe in any position for convenient oil discharge.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI