The UC Engine Assembly (UC-BRKT-100-ASSY) simplifies installation of a Crestron® Flex UC
system, providing all the necessary components (UC-ENGINE, HD-CONV-USB-200,
CBL-MDP-HD-0.5, and UC-CONN-HD) connected and mounted on a single bracket. The
bracket mounts behind a display device in a conference room. The UC-BRKT-100-ASSY is
intended for use with the UC-M150-T, UC-B160-T, and UC-C160-T Crestron Flex conference
systems. For more information, visit www.crestron.com/flex.
UC-BRKT-100-ASSY (connecting cables not shown)
UC-ENGINE
Connector Cover
Connector Cover
Wall Plate Opening
Power Pack
Reusable Cable Tie Wrap (x4)
HD-CONV-USB-200
Check the Box
Item Qty
UC-BRKT-100-ASSY
Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (P/N 2052565) 2
Bit, Spanner, #6 (P/N 2052847) 1
Key, Anchor (P/N 4529654) 1
Screw, 6-32 x 3/8 in., Undercut Head, Spanner (P/N 2052846) 2
Screw, 8-AB x 1-1/2 in., Pan Head, Combo (P/N 2052567) 2
Tie Wrap (P/N 2047935) 4
Installation
Installation instructions for the UC engine assembly as well as other Crestron Flex system
components can be found in the following documents at www.crestron.com/manuals.
• UC-M150-T Quick Start (Doc. 8366)
• UC-B160-T Quick Start (Doc. 8394)
• UC-C160-T Quick Start (Doc. 8395)
For Additional Information
Scan or click the QR codes below for detailed product information.
UC-BRKT-100-ASSY UC-M150-T UC-B160-T UC-C160-T
UC-BRKT-100-ASSY
UC Engine Assembly