Commax CDL-30LR Owner's manual

Brand: Commax

Model: CDL-30LR

Type: Owner's manual

Digital Door Lock CDL-30LR / 30LRC

User Manual

COMMAX CO.,Ltd.

Thank you for purchasing COMMAX products.

Please carefully read this User s Guide (in particular, precautions for safety) before using a product

and follow instructions to use a product exactly.

The company is not responsible for any safety accidents caused by abnormal operation of the product.

Product Feature

Durable door lock without A/S

We produce this door lock under strict quality assurance systembased

on KS certification

Durable body using metallic material

We design the durable body using metallic material for suitable

for fire or impact

Automatic lock / Re-lock / Double lock functions

We think the customers security and convenient so it is easy

to use and very safety.

Safe to use the pin number with dummy number

You can use your pin number safely with dummy pin number.

Multi-registrations for pin-number & electronic key

It is easy to register the pin-number(up to 4) and you can also

Multiple volume control / optional mute

You can easily adjust the volume up to 7 phases.

Easy to detectable Blue-light button

You can easy to use the device using blue-light keypad buttons

Emergency power(9V square battery)

You can use the digital door lock using emergency power even

if the batteries run out completely.

Anti high-voltage / anti fireproof / anti-hacking system

It is very safe for using anti high-voltage and anti-hacking system.

Also if the temperature is higher than certain temperature,

the door will be open automatically with warning sounds

under the fire.

Warning

Don’t install, repair or

disassemble the

device randomly.

Don’t push or insert

the button with drill

or pin.

When you clean the

device, please use

the dry towel.

To Change the

pin-number regularly

for the safety.

To replace the battery,

you need to replace

all new alkaline

batteries.

Don’t impact on

the device.

Don’t use it for other

purpose except digital

door lock.

A / S and please keep

the product warranty.

Product warranty

Don’t put water into

the device.

This devise is for the

fire door products,

so it may not operate

for other environment

normally.

Use the device after

reading the user

manual.

There may be some

burst or leakage from

batteries if you insert

the batteries reversely.

Product Feature

Specification & features

Setting the Pin-number

Part names

How to use

Setting the electronic-key

Deleting the electronic-key

Opening the door at outside

Locking the door at outside

Opening the door at inside

Locking the door at inside

Locking the door by force

Setting & deleting the manual

locking LED function

Convenient functions

(Optional)

Setting the automatic locking

Setting the manual locking

Setting the sound temporary pause

Setting the sound volume

Setting the detection of RFID with

automatic or manual

Setting the connecting of remote

controller

Emergency alarm

Alarming the high temperature

Alarming the break-in

Alarming to prevent the trick &

function of stop operating 1 minute

Alarming the jam of square catches

Warning the battery replacement

Emergency power

Emergency Key

Cause of disorders & Solution

1 ch

Specification & features

Division

Specification of product

Spec.

Applicable

Access methods

Power Source

Emergency power

Type of product

Temperature alarm

Material

Normal fire door

Pin number

Electronic Key

Anti-fireproof type, Temperature sensor type, Key type, Master key door lock(D-F-T-K-M)

Fireproof type, Temperature sensor type, Key type, Master key door lock(D-NF-T-K-M)

DC 6V

DC 9V

Temperature sensor

Outer body

Inner body

Thickness 35mm ~ 50mm

4~12 digit number combination (Up to 4 pin number)

Up to 30 keys

Alkaline AA battery, 4 pcs(LR6 1.5V AA size)

Alkaline battery(Optional)

72 degree ± 5 degree (lat tested)

62 degree ± 5 degree(Normal test)

Al, Zn, Pc

Al, Zn, ABS

RF Specification

Item

RFID

Wireless devices

For safe system

Frequency

13.56Mhz

447.275Mhz

1 ch ASK

Under 93.5dBuV/m@10m

FSK Under 10mW

Channel Modulation Power

Features

Outer body Inner body

Remote controller

(CDL-30LRC only)

Mortise Sticker Screws

User manual

Battery 8 pcs Warning sticker

Drawing for screw hole

Electronic key 4 pcs

Emergency key 2 pcs

(Key type only)

Outdoor shaft

Part names

Outer body

Emergency 9v battery

(not supplied)

No. Name Feature

Key buttons

Electronic keyhole

Battery warning light

Emergency key cover

Emergency key hole

Outer handle

Terminal for

emergency power

To use to register or change the pin number.

You can open the door with registered pin number.

You can open/register the electronic key.

Light will be on with low power with warning sound.

Key type only

To use open/close the door at outdoor.

When the battery is discharged completely, you can operate

the devices with contact the 9V battery to the terminal.

Inner body

No. Name Feature

Battery cover

Cover for battery and buttons for registration of pin number & electronic key.

Registration button Using registration or change the pin number or electronic key

It is the device to lock or close the door for installing side of door.

It can lock the door to door frame

It can prevent to shake the door.

Power for operation door lock

Using lock the door under manual mode

Using open or close the door at inside.

You can lock the door and it can’t be opened at the outside such

as night time.

(LED will be blinking when the door is unlock under manual locking mode.)

Mortise

Dead bolts

Wrench bolts

Alkaline AA battery

Inner handle

Button for manual lock

Button for double

lock

How to use

Setting the Pin-number

Please set the pin number

while you open the door.

Open the battery cover,

Push the registration button once

then you can hear “Beep” sound

Lift up the cover of keypad and

check the lights on in the keypad.

Set the pin number 4 to 12 digits.

button than the registration Push the

Go to outside

Outside

Warning!

Note

If you add the other pin-number, you repeat , until turn off the

lights on keypad. (Pin number can be registered up to 4 pin numbers.

The registration will be canceled when you do not push any numbers

for 10 seconds after push the registration button. If you register new

pin-numbers, old one will be deleted automatically.

Go to outside

Outside

Setting the electronic-key.

Note

Warning!

If you register or re-register new electronic-keys,

you need to register all electronic-keys at once.

Open the battery cover, Push the

registration button once then you

can hear “Beep” sound.

Lift up the cover of keypad

Contact the electronic-key to the

electronic-key receiver in order.

(You can hear the sound when you

You can complete the registration

when you close the cover of

keypad or push the [ ] button on

the keypad.

Warning!

If you add the other electronic-key, you repeat

, until turn off the lights on keypad.

(Electronic-key can be registered up to 30.)

The registration will be canceled when you do not contact any

electronic-keys for 10 seconds after push the registration button.

If you register new electronic-keys, old one will be deleted

automatically.

“Beep”“Beep”

Go to outside

Outside

How to use

Deleting the electronic-key

Open the battery cover, Push the

registration button once then you

can hear “Beep” sound.

Check the light of key numbers.

Push the buttons for 5 seconds,

all the electronic-keys will be deleted

with the sound.

5 sec.

Opening the door at outside

No.1

Using pin-number

Touch the key and

push the pin-number.

Push the button,

you can hear the sound

and open the door.

“Beep”“Beep”

SEC

No.2

No.1

No.2

Opening the door at outside

Using electronic key

Contact the registered electronic

key to the receiver.

You can hear the sound and

open the door

Locking the door at outside

In the case of setting the automatic lock

In the case of setting manual lock

The door is locked automatically after

2 seconds when you close the door.

(Refer to page. 14)

The door is locked when you push the

[*] buttons on keypad.

(Refer to page. 14)

SEC.

How to use

Opening the door at inside

Warning!

No.1

Pull the handle down

If you do not open the door within

7 seconds after you pull the inner body’s

handle down, the door will be locked automatically.

The door is locked, you can open

the door with pulling the inner body’s

handle down, you can open the door.

Warning!

If the door is opened to the inside, please do not install the devices

Locking the door at inside

No.1

No.2

Locking the door by automatic

The door is locked automatically after

2 seconds when the door is closed.

(Refer to page. 14)

Locking the door manually

You can lock the door pushing the

[Manual lock] button when the door

is unlocked.

If you push the [Manual lock] button when the door is locked,

you can hear the sound to notice you that the door is locked.

SEC.

Locking the door by force

Inner double lock

Disable to use pin number or electronic key outside of room

Setting

Cancel

When the door is locked,

Push the [Double lock] button

for 3 seconds in inner body,

the setting is completed with sound.

It will be cancelled if you open the door to pull

the inner body’s handle down.

Setting & cancel the manual lock LED function

When the door is unlocked under manual lock mode, the LED will be blinking and LED

will not be blinking when the door is locked.

Setting & cancel the LED ON function

(Manual lock LED function will be set at first.)

When the door is

locked, to touch the

outer body’s key.

Enter the

Pin-number.

Push the

button at once.

Setting : [2] button

Cancel : [0] button

Note

Under the emergency alarm such as fire alarm or break-in, LED will be blinking for 2 minutes.

When the low battery, LED will be blinking at once when the door is opened or closed.

Convenient functions(Optional)

Setting automatic door lock

This is the optional function to lock the door automatically.

Setting

While you open the door

After putting out

the inner body’s

mortise

(Square catches)

Touch the key of

outer body

Touch the key of

outer body

Enter the pin-number

and button

twice

Enter the [4] button,

the automatic door

lock function

will be operated.

Setting manual door lock

This is the optional function to lock the door manually.

Setting

While you open the door

After putting out

the inner body’s

mortise

(Square catches)

Enter the pin-number

and button

twice

Enter the [7] button,

the manual door

lock function

will be operated.

Note

The device will be set with automatic door lock function at first.

Setting the sound temporary pause

You can set the sound temporary pause at once whatever

you set the sound volume.

Setting

Touch the outer body’s key and push the

[ ] button.(You can’t hear any sounds)

Enter the [Pin-number]

(Only the lamps will be blinking)

Note

This is for only once, you can hear the operating sound in next time.

Setting the sound volume

You can set the sound volume.(You can use this functions when the door is locked)

Setting

You can set the sound volume with 7 different stage

Touch the key of

outer body

Enter the

pin-number

Push [ ]

button

Push the

[3] or [6] button.

Note

The volume will be increased if you push [3] button.

The volume will be decreased if you push [6] button.

Under the temporary pause, the lamp of keypad is blinking

when you push the buttons.

Convenient functions(Optional)

RFID automatic / manual detecting

Electronic key can be detected by automatically or manually.

Setting for automatic detecting

Setting for manual detecting

Touch the outer

body’s key

Enter the

pin-number

Push [ ]

button twice

Push [1] button,

the automatic

detecting function

will be activated

with sound.

Touch the outer

body’s key

Enter the

pin-number

Push [1] button,

the automatic

detecting function

will be activated

with sound.

Note

Push [ ]

button twice

With automatic detecting, the electronic key will be detected automatically

when you touch it to the key hole for electronic key.

With manual detecting, after you touch the outer body’s key, you can open

the door with touching the electronic key hole with electronic key.

The device will be set with automatic detecting at first

Remote controller

You can open the door with remote controller.(Remote controller model only)

Setting

Open the inner body’s

battery cover, push the

[Register] button

shortly with “Beep”

sound.

“Beep”

Push the [Register] or

[Open] button on the

Open Register

remote controller.

Push the [*] button,

the registration will be

completed with sound.

Note

If you add another remote controller, repeat No.2 before lamp of key is off.

(Register up to 5 pcs)

Warning!

The registration will be canceled when you do not register any remote

controller for 10 seconds after push the registration button.

If you register new remote controller, old one will be deleted automatically.

Cancel

Open the inner body’s

battery cover, push the

[Register] button

shortly with “Beep”

sound.

Push [0] button

Push [*] button more

than 5 seconds, all the

remote controller will

be deleted with sound.

Emergency alarm

Detecting high-temperature

If the digital door lock detect the high-temperature

(62 ±5 ) just like firing, it unlock the

door automatically with warning

sounds for safety.

Alarming the break-in

If the digital door lock detect the opening the door

abnormally, under the door is locked, there is the warning

alarm more than 80db.(For example, the door open by force)

Disable the warning of high-temperature & warning sound

Disable

the warning

You can disable the warning if you remove the batteries,

enter the pin-number or contact the electronic key.

It can’t be disable if the temperature is high.

Warning!

If the inner body is exposed to the direct sun lights, sun light for long time,

the warning sound can be activated by operating temperature sensor

The door will be unlocked even under “Inner double lock” situation

Alarming to prevent the trick & function of stop operating 1 minute

If you enter the un-registered pin-number or contact un-registered electronic key for

5 times in row, the digital door lock will be stopped for 1 minute with warning sound

5 times in row??

Alarming the jam of square catches

There will be “Bee, Bee, Bee, Bee”

warning sounds for 3 times when the square

catches(Dead volts) can’t operate in-and-out

Dead volts

(Square catches)

normally or jammed.

Warning!

If the warning sounds keep ringing or operate abnormally,

you may need to move the location of the digital door lock. In this case,

you may request the help to the customer service center.

Warning the battery replacement

If you hear “Beep, Beep, Beep”

sounds sound after operation normally,

you need to change the battery.

At this time, you need to replace

all the batteries for new one.

“Beep, Beep, Beep”

Note

If the batteries run out completely so you can’t open the door,

Buy the 9V

alkaline

battery,

While contacting

the battery to

the terminal

of emergency

power

Push the

[ ] button

After

entering the

pin-number

Push the

[ ] button,

the door will be

unlocked

with sound.

Warning!

If the batteries run out completely, please replace all the batteries.

Do not use new batteries, used batteries or using batteries together.

Emergency alarm

Emergency power

Note

If you can’t open the door when the batteries run out completely,

Buy 9 V

alkaline

battery

While contacting

the battery to

terminal of

emergency

power

Push [ ]

button

After

entering the

pin-number

Push the

[ ] button,

the door will be

unlocked

with sound.

Emergency key(Key type Only)

Note

If you can’t open the door because of malfunctions,

To remove

the cover of

emergency

key to the left

Input the

emergency key

into the key hole

and turn to the

eft or right

When you hear

the releasing

sound of dead bolt

with “Tick”, remove

the emergency key

Pull the

handle down,

the door will

be opened.

Close the cover

of emergency

key hole to move

to the right..

Page is loading ...

Commax CDL-30LR Owner's manual

Commax CDL-30LR Owner's manual

Commax CDL-30LR Owner's manual

Related papers

Other documents