GE JX46BL, JX46AL, JX46WH Installation guide

  • Hello! I am an AI chatbot trained to assist you with the GE JX46BL Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTRUCTIONS
1. Place the left panel against the side of the left
side cabinet and push it up against the bottom
of the top cabinet and back against the back
wall. The panel will protrude out slightly from
the front face of the cabinet so that it will line up
with the case on the microwave oven when it
is installed.
2. Mount the panel to the left side cabinet using
4 screws.
3. Repeat the above steps for the right panel on the
right side cabinet.
4. The microwave oven can now be installed.
INSTALLATION INSTRUCTIONS FOR
FILLER PANELKITS JX46AL, JX46BL, JX46WH
36"
TOOL YOU WILL NEED
Phillips screwdriver
NOTE:
Turn over for instructions in French.
Vous trouverez au verso les instructions en français.
Turn over for instructions in Spanish.
Instrucciones en español al dorso.
164D3370P035
49-40035-1
PARTS INCLUDED
1 Left Filler Panel
10 Phillips Head Screws
1 Right Filler Panel
(8 are required
for installation)
05-01 JR
Printed in the United States
Top Cabinet
Side
Cabinet
Side
Cabinet
Left Side Installation
Right Side Installation
36
(92 cm)
16
1
2
(42.3 cm)
15
3
4
(40.4 cm)
Left Panel Right Panel
13
1
4
(33.7 cm)
/