2. Miller
  3. KK000000

Miller KK000000, GUARDCAGE Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Miller KK000000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
OWNER’S MANUAL
OMĆ207 417 October 2001
Guard Cage (195 045)
WARNING
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off welding power source and disconnect input
power before installing Guard Cage.
• Disconnect input plug or power conductors from
deenergized supply BEFORE moving welding
power source.
FALLING EQUIPMENT can cause injury
and damage.
• Properly install and secure unit in Guard Cage
before moving equipment.
• Have two persons of adequate physical strength
lift/move unit.
• Always secure unit/Guard Cage on cart/truck before
moving unit.
803 130 / 803 131
1
2
1 Guard Cage
2 Mounting Bolts
Bolt unit to Guard Cage using sup-
plied 1/4–20 bolts as shown.
Y Have two persons of adequate
physical strength lift/move
unit.
Y Maximum equipment capacity
of Guard Cage is 85lbs (39kg).
Tools Needed:
5/16 in
. The power source may be
installed in Guard Gage facing
either direction –– mounting
holes are same distance apart.
Figure 1. Installing Guard Cage
Description
Part
No.
195 045
Dia.
Mkgs.
Guard Cage
Quantity
195 045 CAGE, Guard 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
053 300 SCREW,1/4–20 x .62 Hex Hd .50D 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stock #
195 045
Stock #
195 045
/