Owner’s
Manual
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
Before Operating this
Equipment.
14100 REV. 08-065
Rear Implement
Scraper Blade
Model No.
13495
For use with
Swisher Rear Implement Mount System - P/N 6462
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945
Rear Scraper Blade
The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects
in materials and workmanship for a period of one (1) year from the date of purchase by the original
consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to
materials or workmanship. This warranty is subject to the following limitations and exclusions:
1) Commercial Use The warranty period for any product used for commercial or rental is limited to
ninety (90) days from the date of original purchase.
2) Limitations This warranty applies only to products which have been properly assembled,
adjusted, and operated in accordance with the instructions contained within this
manual. This warranty does not apply to any product of Swisher Mower Co.,
Inc., that has been subject to alteration, misuse, abuse, improper assembly or
installation, or shipping damage.
3) Exclusions Excluded from this warranty are normal wear, normal adjustments, and normal
maintenance.
In the event you have a claim under this warranty, you must return the product to an authorized service dealer.
All transportation charges, damage, or loss incurred during transportation of parts submitted for replacement or
repair under this warranty shall be borne by the purchaser. Should you have any questions concerning this
warranty, please contact us toll-free at 1-800-222-8183. The model number, serial number, date of purchase,
and the name of the authorized Swisher dealer from whom you purchased the product will be needed before
any warranty claim can be processed.
THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES AND ANY IMPLIED WARRANTIES
ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN
FOR ALL EXPRESSED WARRANTIES.
Some states do not allow the limitation of consequential damages or limitations on how long an implied
warranty may last, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights and you may have other rights, which vary from state-to-state. This is a limited warranty as
defined by the Magnuson-Moss Act of 1975.
2
14100 REV. 08-065
Assembly Instructions
Assembly InstructionsAssembly Instructions
Assembly Instructions
P/N 13495 Scraper Blade
P/N 13495 Scraper Blade P/N 13495 Scraper Blade
P/N 13495 Scraper Blade
(Reference the Assembly Illustration on the following page)
1.
1.1.
1. Remove all components from carton and familiarize yourself with each piece.
2.
2.2.
2. Align the mount holes on the Scraper Blade mount weldment (Item 1) as shown in
the illustration. Insert 2 ea. 5/16”-18 x 1 hex bolts (Item 7) with washers (Item 16)
through the top mounting holes and fasten hand tight using 2 ea. 5/16” lock nuts (Item
8).
3.
3.3.
3. Insert 2 ea. ½”-13 hex bolts (Item 3) with washers (Item 4) through the lower
mounting holes and fasten hand tight using 2 ea. 1/2” lock nuts (Item 6).
4.
4.4.
4. Insert top mounting weldment (Item 2) into the receiver tube on the Scraper Blade
mount weldment.
5.
5.5.
5. Insert the Bell Crank bushings (Item 5) with a ½” washer (Item 4) into the curved
slots at the top of the Scraper Blade weldment. Next, insert the ½”-13 hex bolts (Item
3) with flat washers (Item 4) through the top mounting weldment (Item 2), the bell crank
bushings (Item 5) and the slots in the Scraper Blade mount weldment. Assemble
another ½” flat washer (Item 4) and hex nut (Item 6) onto the bolt and tighten securely.
The hex nut should tighten onto the Bell Crank bushing, allowing the top weldment to
rotate freely in the receiver tube.
6. Insert the ½” bent pin (Item 9) through the alignment hole in the Top mounting
weldment that will orient the blade in the desired position Secure the pin in the hole by
inserting the hair clip (Item 10) through the hole in the end of the pin.
3
Note: This Scraper Blade is designed to be used with the
Swisher ATV Rear Implement Mount System - P/N 6462.
See the Rear Implement Owners Manual for implement
mounting instructions.
14100 REV. 08-065
13495 Scraper Blade
13495 Scraper Blade 13495 Scraper Blade
13495 Scraper Blade –
––
– Assembly Illustration
Assembly IllustrationAssembly Illustration
Assembly Illustration
4
14100 REV. 08-065
1
2
3
5
4
6
9
9
8
7
3
4
4
6
8
8
8
10
11
12
14
15
15
15
13
15
13
13495 Scraper Blade – Parts List
Blade 48” - Painted7801TK110
Edge 48” - Painted7807TK111
Weldment – Frame 48” - Painted7806TK112
5/16-18 X 3/4 Carriage Bolt10216613
5/16-18 X 1 Carriage Bolt10197714
5/16 SAE Flat WasherNB2751715
Bent Pin 1/2 X 3 with Hair PinNB60619
5/16-18 NYLOC NUTNB181158
5/16-18 X 1 HCC GR5 ZPNB50127
1/2-13 Nyloc NutNB28146
Bell Crank Bushing7841Z25
1/2 USS Flat Washer ZPNB555104
1/2-13 X 1 1/2 HTC GR2 ZPNB61743
Weldment - Top, Mounting13346TK12
Weldment - Mount; Scraper Blade13347TK11
DESCRIPTIONPART NO.QTY.ITEM NO.
5
14100 REV. 08-065
6
14100 REV. 08-065
DECAL LOCATIONS
13673 DECAL
NOTES:
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
7
swisherinc.com
TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650
SWISHER MOWER & MACHINE CO. INC.
SWISHER MOWER & MACHINE CO. INC.SWISHER MOWER & MACHINE CO. INC.
SWISHER MOWER & MACHINE CO. INC.
1602 CORPORATE DRIVE
P.O. BOX 67
WARRENSBURG, MO 64093
Owner’s
Manual
Rear Scraper Blade
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
Before Operating this
Equipment.
WHEN ORDERING PARTS, PLEASE HAVE THE
FOLLOWING INORMATION AVAILABLE:
* PRODUCT – ________________
* MODEL NUMBER - _______________
* PART NUMBER WITH PAINT CODE
* PART DESCRIPTION
1602 CORPORATE DRIVE PO BOX 67 WARRENSBURG, MISSOURI 64093
PH 660. 747. 8183 FAX 660. 747. 8650
swisherinc.com
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945
Model No.1
13494
/