Swordfish 40233 Operating instructions

Swordfish
Brand
Swordfish
Model
40233
Category
Pencil sharpeners
Type
Operating instructions

Swordfish 40233 is a multi-point electric pencil sharpener. It is suitable for sharpening pencils of sizes 6, 7, 8, 9, 10 and 11mm. The sharpener has a safety switch ensuring that it cannot be operated unless the shavings tray is fully in place. It also has a thermal cut-out system which activates after 10 minutes of continuous use, requiring a cool down period of 20 minutes before it is ready for use again. To use the sharpener, first place it on a flat surface and plug it into a wall socket. Then, rotate the dial to select the correct aperture for the pencil in use.

Swordfish 40233 is a multi-point electric pencil sharpener. It is suitable for sharpening pencils of sizes 6, 7, 8, 9, 10 and 11mm. The sharpener has a safety switch ensuring that it cannot be operated unless the shavings tray is fully in place. It also has a thermal cut-out system which activates after 10 minutes of continuous use, requiring a cool down period of 20 minutes before it is ready for use again. To use the sharpener, first place it on a flat surface and plug it into a wall socket. Then, rotate the dial to select the correct aperture for the pencil in use.

Place the sharpener on a flat surface close to an easily
accessible socket outlet. Plug the sharpener into the
wall socket using the power cable provided.
Rotate the dial to select the correct aperture for the
pencil in use, then insert the pencil centrally, holding
it firmly but pressing only lightly.
The sharpener will automatically sharpen and stop
when the pencil is sharp.
Remove the pencil.
Empty the shavings tray by holding it over a waste
bin and sliding it out horizontally from the main
sharpener unit.
Do not allow shavings to over-fill the tray as this
can cause serious damage to the mechanism.
MultiPoint Electric
Pencil Sharpener
Operating
Instructions
Please read the following instructions
before operating your sharpener.
l To be used under adult supervision only.
Cleaning
Regular cleaning will ensure that your sharpener operates eciently.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
cutting blade.
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
l Sharpening coloured pencils causes wax to build up on the
sharpener blade.
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
instructions above.
3
4
5
1
2
Safety Switch
l This sharpener is tted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
Thermal cut-out system
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 10 minutes.
Long continual use will cause the thermal cut-out system to
activate. This is a safety feature and the sharpener will require
a cool down period of approx. 20 minutes before it is ready for use.
Replacement Blades
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40234.
l To download instructions on how to change the blade, visit
www.snopakebrands.com.
5
For troubleshooting and product support, please visit www.swordshsupport.com
Model Product Code
Replacement
Blade Code
Compatible Pencil
Size(s)
MultiPoint
40233
40234
6, 7, 8, 9,
10 & 11mm
!
2
  • Page 1 1

Swordfish 40233 Operating instructions

Swordfish
Brand
Swordfish
Model
40233
Category
Pencil sharpeners
Type
Operating instructions

Swordfish 40233 is a multi-point electric pencil sharpener. It is suitable for sharpening pencils of sizes 6, 7, 8, 9, 10 and 11mm. The sharpener has a safety switch ensuring that it cannot be operated unless the shavings tray is fully in place. It also has a thermal cut-out system which activates after 10 minutes of continuous use, requiring a cool down period of 20 minutes before it is ready for use again. To use the sharpener, first place it on a flat surface and plug it into a wall socket. Then, rotate the dial to select the correct aperture for the pencil in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents