Fitting instruction for use Wire Rope U-bolt Clip PC316
First clip to be mounted as close to the pointed thimble as possible.
The U-bolt to be positioned on the rope’s free end.
The other clips are to be mounted with a minimum distance equal to
the width of the clip (c).
Size of clip (mm) Min. number of clips needed acc. to DIN 741
Up to 7 3
Over 7 up to 16 5
Over 16 up to 20 6
Over 20 up to 25 7
c
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI