Hubbell Wiring Device-Kellems PD1553 Installation guide

  • Hello! I've reviewed the installation instructions for the Hubbell PD1553 Telephone Connecting Device. The document outlines the wiring requirements for connecting the device, as well as the labeling of the terminals and proper wire color mapping. I'm ready to answer your questions regarding the installation process or any other aspect of the instructions.
  • What do the terminals R, T, and GR stand for?
    Which wire from the inside phone cable connects to the "R" terminal?
    Which wire from the inside phone cable connects to the "T" terminal?
    Which wire from the inside phone cable connects to the "GR" terminal?
®
PD1553 PRINTED IN U.S.A. 6/98
Wiring Device-Kellems
Hubbell Incorporated (Delaware)
185 Plains Road
Milford, CT 06460-8897
(203) 882-4800
THIS PRODUCT MEETS THE F.C.C. STANDARD FOR WEATHER-
PROOF OUTDOOR TELEPHONE CONNECTING DEVICES
ESTABLISHED JULY 12, 1976
Wiring Instructions
Terminals on this device are marked as follows:
R - Ring
T - Tip
GR - Ground
"Inside" phone cable
that runs from the
telephone junction block
to the inlet has four
wires in it. They must
be connected to the
inlet as follows:
Red wire to "R" (Ring)
Green wire to "T" (Tip)
Yellow wire to "GR" (Ground)
Black wire (Not used)
/