2. morse
  3. 311-1-220-50

morse 311-1-220-50, 311-3-230-50, 311-3-400-50 User manual

  • I have reviewed the Declaration of Conformity for the 311 Series 50Hz Automated Drum Tumbler. The document certifies that the product complies with European directives for electromagnetic compatibility, low voltage, and machinery safety. I'm prepared to answer your questions about this equipment, its compliance standards, and more.
  • What is the product covered by this declaration?
    What directives does this product comply with?
    What standards does this product meet for EMC emissions?
    What are the generic immunity standards met by this product?
    What specific immunity tests has this product been subjected to?
Copyright 2022 - Morse Mfg. Co., Inc. Form DC311-50 (Updated 2 Sep., 2022) 1
The Specialist In Drum Handling Equipment
CE Declaration of Conformity
50Hz 311 Series Automated Drum Tumblers
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
CE Declaration of Conformity
This product has been tested to the current appropriate standards
and is in compliance with the following
-------------------------------------------------------------------
EMC Directive: 2014/30/EU
Generic Emissions Standard: EN 61000-6-4:2007
Product Specic Emissions: EN 55011 Class A
Generic Immunity Standard: EN 61000-6-2: 2005
Immunity: EN 61000-4-2 Electrostatic Discharge
EN 61000-4-6 Conducted Susceptibility
Low Voltage Directive: 2014/35/EU
Standard: EN 60204-1 Safety of Machinery
Machinery Directive: 2006/42/EC
Standard: EN 60204 Safety of Machinery
-------------------------------------------------------------------
Manufacturer’s Name: MORSE Mfg. Co., Inc.
Manufacturer’s Address: 103 Kuhn Rd.
Syracuse, NY 13208
Product: Automated Drum Tumblers
Model: 50Hz 311 Series
Serial Number: 400000 and up
-------------------------------------------------------------------
This Certicate of Compliance issued 2022 is valid for the test sample of the product specied
above and that it conforms to the Directive(s) and Standard(s).
Signature:
Nathan Andrews
President
Morse Manufacturing Company, Inc.
103 Kuhn Rd.
Syracuse, New York, USA 13208
Phone: (315)-437-8475
Fax: (315)-437-1029
/