Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before rst use.
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
wedge
x4
screw
x4
A B C D E F
GHJ
I
Hardware Supplied
Wall Strap
dowel
x24
screw
x12
bolt
x60
locking
nut x60
small
screw x36
slide
rail x3
slide
rail x3
I1
I2
J1
J2
long screw
x12
x4
washer
Z
wall
screw
Y
wall
anchor
x2
X
safety
strap x2
W
V
screw
x2
x2
K
plastic
glide x10
Sadie Entertainment Unit
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
12
Insert 2x bolts (A) into panel [4]. Attach 1x slide rail (I1) to panel [4]
using 3x screws (D). Insert 2x bolts (A) into panel [5]. Attach 1x slide
rail (I2) to panel [5] using 3x screws (D). Tighten with a screwdriver.
Attach 1x slide rail (I1) to one side of panel [9] using 3x screws (D). Turn
it over and attach 1x slide rail (I2) to the other side using 3x screws (D).
Tighten with a screwdriver. Repeat this step for the other panel [9].
5
4
I2
I1
D
D
D
D
D
A
A
AA
I2
D
I1
D
A
DI2
D
D
D
I1
D
D
D
x2
I2
D
9
x2
9
I1
D
Sadie Entertainment Unit
2
mocka.co.nz | mocka.com.au
Assembly Instructions
12
Insert 2x bolts (A) into panel [4]. Attach 1x slide rail (I1) to panel [4]
using 3x screws (D). Insert 2x bolts (A) into panel [5]. Attach 1x slide
rail (I2) to panel [5] using 3x screws (D). Tighten with a screwdriver.
Attach 1x slide rail (I1) to one side of panel [9] using 3x screws (D). Turn
it over and attach 1x slide rail (I2) to the other side using 3x screws (D).
Tighten with a screwdriver. Repeat this step for the other panel [9].
5
4
I2
I1
D
D
D
D
D
A
A
AA
I2
D
I1
D
A
DI2
D
D
D
I1
D
D
D
x2
I2
D
9
x2
9
I1
D
34
Insert 4x bolts (A) into panel [3]. Insert 2x bolts (A) into panel [6], and
insert 2x bolts (A) into panel [7].
Attach panels [9] to panel [3] using 4x dowels (C) and secure with 4x
locking nuts (B). Tighten with a screwdriver.
AA
AA
A
A
A
A
C
C
C
C
B
7
6
3
93
9
B
B
B
B
Sadie Entertainment Unit
3
mocka.co.nz | mocka.com.au
Assembly Instructions
56
Attach panels [6] and [7] to panel [3] using 4x dowels (C) and secure
with 4x screws (F). Tighten with a screwdriver.
Attach panel [5] to panel [20] using 2x locking nuts (B). Attach panel [4]
to the other panel [20] using 2x locking nuts (B). Attach both panels [20]
to panels [6] and [7] using 4x locking nuts (B). Tighten with a
screwdriver.
C
C
C
C
F
F
F
B
7
6
3
5
4
20
20
B
B
B
B
7
6
3
Sadie Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panels [6] and [7] to panel [3] using 4x dowels (C) and secure
with 4x screws (F). Tighten with a screwdriver.
Attach panel [5] to panel [20] using 2x locking nuts (B). Attach panel [4]
to the other panel [20] using 2x locking nuts (B). Attach both panels [20]
to panels [6] and [7] using 4x locking nuts (B). Tighten with a
screwdriver.
C
C
C
C
F
F
F
B
7
6
3
5
4
20
20
B
B
B
B
7
6
3
78
Insert 8x dowels (C) into the tops of the panels as shown. Insert 12x bolts (A) to panel [1]. Attach panels [21] to panel [1] using 4x
locking nuts (B). Tighten with a screwdriver.
20
C
C
C
C
C
C
C
C
20
5
4
7
6
1
A
A
A
A
A
A
A
A
A
A
A
A
21
B
B
21
B
B
Sadie Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au
910
Attach panel [1] to panel [5], [7], [6] and [4] using 8x locking nuts (B).
Tighten with a screwdriver.
Slide back panel [12] down along the grooves between panel [5] and [4].
Insert 8x dowels (C) into panel [4], [5] and both panels [9].
1
5
7
6
4
B
B
B
B
B
B
B
B
B
C
C
C
C
C
12
4
9
9
5
Sadie Entertainment Unit
Assembly Instructions
6
mocka.co.nz | mocka.com.au
910
Attach panel [1] to panel [5], [7], [6] and [4] using 8x locking nuts (B).
Tighten with a screwdriver.
Slide back panel [12] down along the grooves between panel [5] and [4].
Insert 8x dowels (C) into panel [4], [5] and both panels [9].
1
5
7
6
4
B
B
B
B
B
B
B
B
B
C
C
C
C
C
12
4
9
9
5
11
12
Attach panel [2] to panel [5], [4] and [9] using 8x screws (F). Tighten
with a screwdriver.
Insert 16x bolts (A) into panel [2]. Insert 4x bolts (A) into each panel [10].
10 x2
A
A
A
A
A
A
AA
AA
A
A
AA
A
A
A
A
A
A
2
2
F
F
F
F
F
F
F
F
12
12
Sadie Entertainment Unit
Assembly Instructions
7
mocka.co.nz | mocka.com.au
13 14
Attach panels [10], [8] and [11] together as shown using 8x locking nuts
(B). Tighten with a screwdriver.
Attach panels [10], [11] and [8] to panel [2] using 16x locking nuts (B).
Tighten with a screwdriver. Attach 10x plastic glides (K) as shown.
10
8
10
8
11
11
B
B
B
B
B
B
B
B
2
B
B
B
B
B
10
8
B
B
B
B
B
12
K
K
K
K
K
K
K
K
K
K
Sadie Entertainment Unit
Assembly Instructions
8
mocka.co.nz | mocka.com.au
13 14
Attach panels [10], [8] and [11] together as shown using 8x locking nuts
(B). Tighten with a screwdriver.
Attach panels [10], [11] and [8] to panel [2] using 16x locking nuts (B).
Tighten with a screwdriver. Attach 10x plastic glides (K) as shown.
10
8
10
8
11
11
B
B
B
B
B
B
B
B
2
B
B
B
B
B
10
8
B
B
B
B
B
12
K
K
K
K
K
K
K
K
K
K
15 16
Attach 4x wedges (G) using 4x screws (H) to the corners of panel [12].
Attach 2x safety straps (V) and 2x washers (Z) to the back of top panel
[1] using 2x screws (W). Tighten with a screwdriver.
Insert 4x bolts (A) into each panel [13], [14] and [15]. Attach panels [16]
and [17] to panel [15] using 4x locking nuts (B). Attach panels [16] and
[17] to panels [13] and [14] using 8x locking nuts (B). Slide down panels
[19] to form the base of the drawers.
1
12
AA
AA
A
A
AA
AA
A
A
B
B
B
B
B
B
B
B
13 14
15
17
16
19
13
14
15
17
16
19
H
G
G
G
G
H
H
H
G
H
V
ZW
V
ZW
screw
strap
washer
Sadie Entertainment Unit
Assembly Instructions
9
mocka.co.nz | mocka.com.au
17 18
Attach back panels [18] to the side panels using 12x screws (E). Attach
1x slide rail (J1) and 1x slide rail (J2) to the sides of each drawer and
secure with 6x screws (D) as shown. Tighten with a screwdriver.
Insert the drawers into the unit as shown. Ensure the drawers slide
smoothly and easily along the rails.
D
D
DD
D
J1
J2
D
D
DD
D
J1
J2
D
D
D
D
DD
J1
J2
D
D
D
D
E
E
E
E
E
E
E
E
13
14
15
13 14
15
18
18
13
14
15
Sadie Entertainment Unit
10
mocka.co.nz | mocka.com.au
Assembly Instructions
17 18
Attach back panels [18] to the side panels using 12x screws (E). Attach
1x slide rail (J1) and 1x slide rail (J2) to the sides of each drawer and
secure with 6x screws (D) as shown. Tighten with a screwdriver.
Insert the drawers into the unit as shown. Ensure the drawers slide
smoothly and easily along the rails.
D
D
DD
D
J1
J2
D
D
DD
D
J1
J2
D
D
D
D
DD
J1
J2
D
D
D
D
E
E
E
E
E
E
E
E
13
14
15
13 14
15
18
18
13
14
15
19 20
Lift the furniture into the desired location, do not drag. Use a drill to
create two small holes lining up with the top of the safety straps. Fasten
to wall using 2x wall plugs (X), 2x washers (Z) and 2x screws (Y).
Tighten with a screwdriver.
You’re done, enjoy!
X
Y
Z
X
Y
Z
wall
plug
screw
strap
washer
Sadie Entertainment Unit
11
mocka.co.nz | mocka.com.au
Assembly Instructions
/
