Using tips for the control panel
1. Plug the cord, the bread maker will “BI”, the LED display will display the default time and the
menu code "1".
NOTE: Different code is corresponded to different menu.The system default program "1" is for
menu "1.basic", and the "2" for menu "2.Sweet",and so on.
2. ÙO GP WÈ"mg { < press this key to choice a menu to make bread, the corresponding menu code
shown in LED display.
It is toast, the main material is
strong flour.
Mix-Ferment (3 times)-Bake
That sugar is more sugar content,
the main material is strong flour.
Mix-Ferment (3 times)-Bake
Due to different material and
climate in different locations, fixed
program is hard to suit every taste.
This menu let you set the time of
every step to make the bread(time
of mix, ferment, bake can be set by
1, Each time you press ”DIY”,
the screen flashes the step 2,then
press ”time” to set the time
3,repeat the step 1,2 above until
all is set 4,press”DIY”,a long
sound, the set is saved
Mixture normal flour and whole
Mix-Ferment (3 times)-High