J-Tech Digital JTD792 is a receiver that works in conjunction with JTD-791 transmitter and allows users to use these extenders in a point-to-point, point-to-many, or many-to-many configurations. It distributes 1080P 60Hz audio/video signals up to 400ft. using a single UTP Cat5e/6 cable and supports wideband IR (38-56kHz) to control the source device from the display's location. With the help of the JTECH-NS24 or JTECH-NS48 A/V over IP gigabit ethernet switch, you can use this JTD792 model in point-many and many-to-many configurations.
J-Tech Digital JTD792 is a receiver that works in conjunction with JTD-791 transmitter and allows users to use these extenders in a point-to-point, point-to-many, or many-to-many configurations. It distributes 1080P 60Hz audio/video signals up to 400ft. using a single UTP Cat5e/6 cable and supports wideband IR (38-56kHz) to control the source device from the display's location. With the help of the JTECH-NS24 or JTECH-NS48 A/V over IP gigabit ethernet switch, you can use this JTD792 model in point-many and many-to-many configurations.
J-Tech Digital JTD792 is a receiver that works in conjunction with JTD-791 transmitter and allows users to use these extenders in a point-to-point, point-to-many, or many-to-many configurations. It distributes 1080P 60Hz audio/video signals up to 400ft. using a single UTP Cat5e/6 cable and supports wideband IR (38-56kHz) to control the source device from the display's location. With the help of the JTECH-NS24 or JTECH-NS48 A/V over IP gigabit ethernet switch, you can use this JTD792 model in point-many and many-to-many configurations.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI