DANCO 88103 Operating instructions

Type
Operating instructions

DANCO 88103 is a faucet repair kit designed to fix leaking faucets. It includes all the necessary parts to replace worn-out components, such as the spray diverter, ball and cam assembly, and rubber seats and springs. DANCO 88103 is easy to install, requiring only a few basic tools. Simply follow the step-by-step instructions included in the kit to get your faucet up and running again in no time.

DANCO 88103 is compatible with DELTA® and PEERLESS® faucets. It is also backed by a lifetime warranty, so you can be sure that it will last for years to come.

DANCO 88103 is a faucet repair kit designed to fix leaking faucets. It includes all the necessary parts to replace worn-out components, such as the spray diverter, ball and cam assembly, and rubber seats and springs. DANCO 88103 is easy to install, requiring only a few basic tools. Simply follow the step-by-step instructions included in the kit to get your faucet up and running again in no time.

DANCO 88103 is compatible with DELTA® and PEERLESS® faucets. It is also backed by a lifetime warranty, so you can be sure that it will last for years to come.

Visit
for Easy D.I.Y. Solutions
DANCO.COM
©2023 Manufactured for
Danco, Inc., Irving, TX 75062
88103i
INSTALLATION INSTRUCTIONS
FOR FAUCET REPAIR KIT
DELTA
®
& PEERLESS
®
A
B
F
D
G
C
F
E
H
Instructions
Tools Required: Adjustable Wrench, Screwdriver, Allen Wrench
1. Turn off water supply to faucet.
2. Using allen wrench, partly unthread Set Screw (B), and then pull off Handle (A).
3. Unthread and remove Cap Assembly (C).
4. Remove ball and cam assembly (D) by pulling up on ball Stem (E).
5. Lift rubber seats and springs (F) out of pockets in Faucet Body (G) to check Spray
Diverter (H) and body O rings.
6. Remove and clean spray diverter unit (H). If spray diverter is worn, replace with
Danco STK/No. 80092 spray diverter.
7. Reassemble faucet in reverse order, using new replacement parts. Make sure that
slot in side of ball is inserted over pin inside body and that lug on side of cam is
inserted into slot on side of body. Tighten Cap (C) securely.
8. Turn on water supply to faucet. Check for leaks.
Instrucciones
Herriamentas requeridas: llave regulable, destornillador, llave hexagonal
1. Corte el suministro de agua al grifo.
2. Usando la llave hexagonal desenrosque parcialmente el tornillo de presión (B).
Luego retire la manija (A).
3. Desenrosque y retire el casquete (C).
4. Retire el juego de bola y tope (D) tirando el vástago de la bola (E) hacia arriba.
5. Levante los asientos y resortes de goma (F) retirándolos de las cámaras en el
cuerpo del grifo (G) para revisar el derivador-rociador (H) y los anillos en “O”
en el cuerpo.
6. Retire y limpie el derivador-rociador (H). Si el derivador-rociador está desgastado,
sustitúyalo por el derivador-rociador Danco # 800092.
7. Vuelva a armar la llave en el orden inverso, usando la nueva piezas de repuesto.
Asegúrese de que la ranura en el costado de la bola esté insertada sobre la chaveta
dentro del cuerpo y que el adaptador en el costado del tope esté insertado en la
ranura en el costado del cuerpo. Ajuste el casquete (C) firmemente.
8. Conecte el suministro de agua al grifo. Revise si hay fugas.
  • Page 1 1

DANCO 88103 Operating instructions

Type
Operating instructions

DANCO 88103 is a faucet repair kit designed to fix leaking faucets. It includes all the necessary parts to replace worn-out components, such as the spray diverter, ball and cam assembly, and rubber seats and springs. DANCO 88103 is easy to install, requiring only a few basic tools. Simply follow the step-by-step instructions included in the kit to get your faucet up and running again in no time.

DANCO 88103 is compatible with DELTA® and PEERLESS® faucets. It is also backed by a lifetime warranty, so you can be sure that it will last for years to come.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages