White Hardboard Panels and Frames
Your new closet doors and frames have been delivered without any type of factory-
applied protective coating such as lacquer, wax, or other surface protection. Though
virtually maintenance-free, areas of the door surfaces that come into human contact
will produce fingerprints due to salts and oils in the skin. Routine maintenance,
Including cleaning and dusting may be required in order to maintain the brilliance
and rich luster of the frame and surface of the white hardboard panels.
Transporting & Unpacking
It is recommended that doors and frames be carefully unpacked on-site just prior to
installation, and placed in a vertical position. When securing or transporting doors
and frames, do NOT allow ropes, straps, or cords to come into direct contact with
the frames or door panels surfaces or scratching may occur. NOTE: Your doors are
constructed from commercial grade materials but they CAN be scratched.
Care & Maintenance for Mirror Doors
• Use warm water with a clean soft cloth. Do not allow edges to remain wet.
• Do not use bleach, acid or alkali cleaners as they will damage and dull the
surface.
• Always use soft, grit-free cloths to reduce chances of scratching the surface.
• Be sure to dry all joints and edges thoroughly.
• Routine cleaning maintenance can be accomplished simply by wiping the
panels with a damp cloth.
• Keep bottom track free and clear of debris so that doors roll smoothly.
501 Kettering Drive, CA 91761 Phone: 909-563-1700 Fax: 909-563-1791
/