Purolator C36179 Installation guide

Installation Instructions

Cabin Filter

Instrucciones de montaje

Filtro de habitaculo

Notice de montage

Filtre d’habitacle

Installation Instructions

Instructions may vary by make, model and year.

1240847S01

C36179

LOCATION: BEHIND THE GLOVE COMPARTMENT

QUANTITY USED: 1

DEGREE OF DIFFICULTY: EASY

ESTIMATED INSTALLATION TIME: 18 MINUTES

1. Open the glove compartment door.

2. Remove the two glove compartment stoppers, then lower the

glove compartment, Figure 1.

3. Disconnect damper rod from the glove compartment, Figure 2.

4. Remove the ﬁlter cover by pushing the cover knob, Figure 3.

5. Remove the cabin air ﬁlter element from the ﬁlter housing.

6. Install the new cabin air ﬁlter element into the ﬁlter housing.

Ensure the ﬁlter element is facing in the proper direction.

7. Install the cabin air ﬁlter cover. Ensure the cover is properly

seated.

8. Lift the glove compartment and connect damper rod.

9. Install the glove compartment stops.

10. Close the glove compartment.