ENCA-MDH
Mini DisplayPort to HDMI Adapter
ENCA-MDH enables you to connect directly any HDMI ready device (monitor, projector…)
to a Mini DisplayPort interface (on Laptop or Desktop…). This product provides an easy and
affordable solution between host system and HDMI ready display device. This product is
also compliant with both low-bit-rate and high-bit-rate DisplayPort.
ENCA-MDH allows you to connect a HDMI ready display device to all new Macs (MacBook /
MacBook Pro / MacBook Air / Mac Mini / iMac).
Note:
Interlaced modes and reduced blanking modes are not support
Features and Benefits
Easiest way to connect Mac and PC with Mini DisplayPort output to HDMI ready
devices, such as monitor and projector
Compliance with DisplayPort Specification V1.1a
Support up to 1920 x 1200 (WUXGA display) and 1080p HD Video
Support 18/24/30 bitdepth per pixel color format
Support DPCD Rev 1.1
Specification
Connector Mini DisplayPort Male to HDMI Female
Standard Compliant with DisplayPort Specification v1.1a
Resolution
Up to 1920X1200 (WUXGA Display) and 1080p @ 60Hz (Full HD
Video)
Cable Length 125 mm (excluding the connectors at both ends)
Dimension 60 x 21 x 13 mm (L x W x H) (HDMI side)
Weight 60 g
Housing Plastic (ABS)
Operation temperature 10 ~ 40 ºC
Storage temperature -10 ~ 80 ºC
Certification FCC, CE, RoHS
Connection Diagram
Package Content
ENCA-MDH
※
The specifications and picture are subject to change without prior notice! Please refer to the directions in product package
-
1
-
2
-
3
