Philips SWN2117/10 Datasheet

Category
Networking cables
Type
Datasheet

Philips SWN2117/10 is a high-quality CAT 5e Networking Cable designed to provide a reliable and fast connection to your Ethernet, Local Area Networks (LAN), and other networks. With its superior shielding, it minimises data transfer loss by guarding against external radio frequency noise, ensuring optimal performance. The cable meets the required TIA/EIA-568 specifications for data transmission standards.

The snagless boot prevents accidental disconnections, while the corrosion-resistant connectors and moulded plug ensure secure connections and extended durability. Its flexible PVC jacket offers protection and ease of installation. Moulded ends prevent fraying, further enhancing the cable's lifespan.

Philips SWN2117/10 is a high-quality CAT 5e Networking Cable designed to provide a reliable and fast connection to your Ethernet, Local Area Networks (LAN), and other networks. With its superior shielding, it minimises data transfer loss by guarding against external radio frequency noise, ensuring optimal performance. The cable meets the required TIA/EIA-568 specifications for data transmission standards.

The snagless boot prevents accidental disconnections, while the corrosion-resistant connectors and moulded plug ensure secure connections and extended durability. Its flexible PVC jacket offers protection and ease of installation. Moulded ends prevent fraying, further enhancing the cable's lifespan.

Philips
CAT 5e Networking Cable
Moulded RJ45 connectors
15 m Black
SWN2117
Connect to the Ethernet
High-speed data transfer
Ensure a reliable connection to the Ethernet, Local Area Networks (LAN) and other
networks with this STP/RJ45 Cat5e cable. Shielded, twisted design increases performance
with speeds up to 350 MHz.
Meets your specific connection requirements
Meets TIA/EIA-568 specifications
RJ45/RJ45 connectors
Maximises data transfer
Superior shielding maximises data transfers
Enjoy extended durability
Snagless boot
Corrosion-resistant connectors
Moulded plug for secure connections
Flexible PVC jacket
Moulded ends for extended durability
Issue date 2010-08-24
Version: 2.0.10
12 NC: 8670 000 55307
EAN: 87 12581 49647 0
© 2010 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
SWN2117/10
CAT 5e Networking Cable
Moulded RJ45 connectors 15 m Black
Highlights
Superior shielding
Superior shielding maximises data transfer by
guarding against external radio frequency noise.
Meets TIA/EIA-568 specs
Meets required standard for data transmission.
Snagless boot
The snagless boot prevents the cable from being
accidentally disconnected by protecting the
disconnect tab.
Corrosion-resistant connectors
Compressed brass with 24K gold-electroplated
connectors creates a secure and extremely durable
connection that optimises signal quality and delivers
the best picture and data transfer.
Moulded plug
Moulded plugs ensure secure connections between
components and offer extended durability.
Flexible PVC Jacket
Flexible PVC jacket provides protection to the
delicate core of the cable. It also offers extended
durability and ease of installation.
Moulded ends
Moulded ends prevent fraying and extend the life of
your cable.
Inner Carton
Number of consumer packages: 4
•Inner carton (L x W x H): 42.5 x 14 x 19.5 cm
Gross weight: 2.744 kg
Net weight: 2.196 kg
Tare weight: 0.548 kg
EAN: 87 12581 50704 6
Outer Carton
Number of consumer packages: 8
Outer carton (L x W x H): 44 x 30 x 21 cm
Gross weight: 5.938 kg
Net weight: 4.392 kg
Tare weight: 1.546 kg
EAN: 87 12581 50703 9
Packaging dimensions
Packaging type: Blister
Number of products included: 1
Packaging dimensions (W x H x D):
18 x 24.5 x 6 cm
Gross weight: 0.636 kg
Net weight: 0.549 kg
Tare weight: 0.087 kg
EAN: 87 12581 49647 0
  • Page 1 1
  • Page 2 2

Philips SWN2117/10 Datasheet

Category
Networking cables
Type
Datasheet

Philips SWN2117/10 is a high-quality CAT 5e Networking Cable designed to provide a reliable and fast connection to your Ethernet, Local Area Networks (LAN), and other networks. With its superior shielding, it minimises data transfer loss by guarding against external radio frequency noise, ensuring optimal performance. The cable meets the required TIA/EIA-568 specifications for data transmission standards.

The snagless boot prevents accidental disconnections, while the corrosion-resistant connectors and moulded plug ensure secure connections and extended durability. Its flexible PVC jacket offers protection and ease of installation. Moulded ends prevent fraying, further enhancing the cable's lifespan.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI