Cisco WS-X4648-RJ45-E= Datasheet

Category
Network switch components
Type
Datasheet
Data Sheet
© 12009 isco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 1
Cisco Catalyst 4500 Series Line Cards
Secure, Flexible, Nonstop Communications
Product Benefits
The Cisco
®
Catalyst
®
4500 Series Switches provide scalable nonblocking Layer 2–4 switching with
secure, flexible, nonstop communications, enabling business resilience for enterprises, small and
medium-sized businesses (SMBs), and Metro Ethernet customers deploying business-critical
applications. The Cisco Catalyst 4500 delivers predictable and scalable high performance, with
advanced dynamic quality-of-service (QoS) capabilities and configuration flexibility for enterprise
wiring closets and SMB access/core. Integrated resiliency features in both hardware and software
maximize network availability, helping to ensure workforce productivity, profitability, and customer
success. Its centralized, innovative, and flexible system design helps ensure smooth migration to
wire-speed IPv6 and 10 Gigabit Ethernet. The flexibility, scalability, and forward and backward
compatibility between generations of the Cisco Catalyst 4500 Series extend deployment life,
providing exceptional investment protection, reducing the total cost of ownership.
The Cisco Catalyst 4500 E-Series is a high-performance next-generation extension to the Cisco
Catalyst 4500 Series. The new “E-Series” is composed of the Cisco Catalyst 4500 Series
Supervisor Engine 6-E, E-Series line cards, and E-Series chassis that are designed for secure,
flexible, nonstop communications with superior backward and forward compatibility delivering
exceptional investment protection for organizations of all sizes.
Cisco Catalyst 4500 E-Series and Classic Line Cards
The Cisco Catalyst 4500 Series offers two classes of line cards: classic and E-Series. Classic line
cards provide 6 gigabits of switching capacity per slot. E-Series line cards increase the per slot
switching capacity to 24 gigabits. This increase in per slot switching capacity with the E-Series line
cards requires the Cisco Catalyst 4500 E-Series chassis and the Cisco Catalyst 4500 Series
Supervisor Engine 6-E. Classic line cards may be deployed in both classic and E-Series chassis
with either classic Cisco Catalyst 4500 Series supervisor engines or with the Supervisor Engine 6-
E. With the Supervisor Engine 6-E, the classic line cards per slot switching capacity remains at 6
gigabits per slot. However, because of the centralized switching architecture of the Cisco Catalyst
4500, the classic line cards will adopt all of the new Supervisor Engine 6-E features such as eight
queues per port, dynamic QoS, and hardware-based IPv6 routing. Please refer to the Supervisor
Engine 6-E data sheet for more feature details. Classic line cards and E-Series line cards may be
mixed and matched within a Cisco Catalyst 4500 E-Series chassis with no performance
degradation: classic line cards will operate at 6 gigabits per slot, and E-Series line cards will
operate at 24 gigabits per slot. Table 1 summarizes the chassis and supervisor support for both
classic and E-Series line cards.
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 23
Table 1. Cisco Catalyst 4500 Line-Card Support Options
Line-Card Type Per Slot Bandwidth Chassis Support Supervisor Support
Cisco Catalyst 4500 E-
Series Line Cards
24 Gbps Cisco Catalyst 4503-E, 4506-
E, 4507R-E, and 4510R-E
Supervisor Engine 6-E,
Supervisor Engine 6L-E,
Cisco Catalyst 4500 Series
Classic Line Cards
6 Gbps Cisco Catalyst 4503, 4506,
4507R, and 4510R
1
Switches
Cisco Catalyst 4503-E, 4506-
E, 4507R-E, and 4510R-E
Switches
Supervisor Engine 6-E,
Supervisor Engine 6L-E,
Supervisor Engine V-10GE,
Supervisor Engine V,
Supervisor Engine IV,
Supervisor II-Plus-10GE,
Supervisor Engine II-Plus,
Supervisor Engine II-Plus-TS
2
Cisco Catalyst 4500 E-Series Gigabit Ethernet Line Cards
The Cisco Catalyst 4500 E-Series 48-port Gigabit Ethernet line cards provide high-performance
10/100/1000 switching at 24 Gbps per slot. (2:1 oversubscribed). The Cisco Catalyst 4500 48-port
10/100/1000 E-Series line cards are designed for LAN access applications where desktop users
require gigabit connection speeds. The Cisco Catalyst 4500 48-port 10/100/1000 E-Series line
cards are available in two versions: one with standard PoE 802.3af, and the second one with
standard PoE 802.3af and PoEP ready features such as support for up to 30 Watts per port.
Cisco Catalyst 4500 E-Series 10 Gigabit Ethernet Line Card
The Cisco Catalyst 4500 E-Series now supports 10 Gigabit Ethernet line cards. The Cisco Catalyst
4500 6-port E-Series 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for
high-performance 10 Gigabit Ethernet aggregation in the campus, in small to medium networks as
a core switch, or for high-performance wiring closets where additional 10 Gigabit Ethernet uplinks
are required. The Cisco Catalyst 4500 E-Series 6-port 10 Gigabit Ethernet line card supports
standard X2 optics as well as the Cisco TwinGig modules. The Cisco Catalyst 4500 48-port
10/100/1000 E-Series linecards are available in two versions: one with data-only capabilities, and
the second one with standard PoE 802.3af and PoEP ready features such as support for up to 30
Watts per port.
The Cisco TwinGig Converter Module converts a single 10 Gigabit Ethernet X2 interface into two
Gigabit Ethernet port slots, which can be populated with appropriate Small Form-Factor Pluggable
(SFP) optics, providing a total of 12 wire-speed Gigabit Ethernet ports if used in all 6 X2 interface
slots. The flexibility provided by the TwinGig Converter Module enables customers to aggregate
Gigabit Ethernet and 10 Gigabit Ethernet LAN access switches on a single line card. The ability to
support either Gigabit Ethernet uplinks or 10 Gigabit Ethernet ports on a single line card further
demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 Series
architecture (Figure 1).
TwinGig modules convert a single X2 port into two Gigabit Ethernet SFP ports.
1
Supervisor Engine 6-E, Supervisor Engine V-10GE and Supervisor Engine V are the only supervisors
supported on 4510R-E and 4510-R Chassis
2
Supervisor Engine II-Plus-TS is supported on 4503-E and 4503 Chassis only
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 23
Figure 1. TwinGig Module
Cisco Catalyst 4500 E-Series and Classic Power over Ethernet Line Cards
The Cisco Catalyst 4500 Series offers line cards, power supplies, and accessories required to
deploy and operate a standards-based PoE internetwork. PoE provides –48 VDC power over
standard Category 5 unshielded twisted-pair (UTP) cable up to 100 meters when an IEEE 802.3af-
compliant or Cisco prestandard powered device is attached to the PoE line-card port. Instead of
requiring wall power, attached devices such as IP phones, wireless base stations, video cameras,
and other IEEE-compliant appliances can use power provided from the Cisco Catalyst 4500 Series
PoE line cards. This capability gives network administrators centralized control over power and
eliminates the need to install outlets in ceilings and other out-of-the-way places where a powered
device can be installed.
Although all references to “PoE,” “inline power,” and “voice” power supplies and line cards are
synonymous, there are currently only two versions: Cisco prestandard and IEEE 802.3af
compliant. Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the IEEE
802.3af standard and the Cisco prestandard power implementation, helping ensure backward
compatibility with existing devices powered by Cisco. All IEEE 802.3af-compliant line cards can
distinguish an IEEE or Cisco prestandard powered device from an unpowered network interface
card (NIC), helping ensure power is applied only when an appropriate device is connected.
Cisco Catalyst 4500 Classic Fast Ethernet and Gigabit Line Cards
The Cisco Catalyst 4500 Series offers a variety of classic Fast Ethernet and Gigabit Ethernet line
cards that include fiber and copper interfaces optimized for desktops, branch office backbones,
and servers for enterprise and commercial switching solutions, and service provider metropolitan
Ethernet networks. Gigabit Ethernet line cards include cost-effective, high-performance
1000BASE-X gigabit interface converter (GBIC) and SFP-based Gigabit Ethernet line cards and
the high-density 10/100/1000BASE-T triple-speed autosensing, autonegotiating Gigabit Ethernet
line cards. Fast Ethernet line cards include various densities of wire-speed 10/100, 100-FX,
100BASE-LX10, and 100BASE-BX-D options.
Features and Benefits
Functionally Transparent
Cisco Catalyst 4500 Series switches offers an extensive line of modules that support numerous
speeds and physical media combinations. These line cards are functionally transparent; all the
packet processing, queuing, buffering, and QoS occur in the supervisor engine. To that end, both
classic and E-Series line cards acquire the features and capabilities of the installed supervisor
engine. For example, a classic line card previously deployed with a classic supervisor engine using
4 queues per port will automatically have capability for 8 queues per port (first half CY2008) if
redeployed with a Supervisor Engine 6-E. This architecture enables customers to easily upgrade
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 23
all Ethernet line cards on their Cisco Catalyst 4500 Series systems to higher-layer switching
functions by adding a new supervisor engine. The simple design of the line cards results in a very
high mean time between failures (MTBF), helping ensure high availability for a single connection to
an end user.
Modular Versatility
The Cisco Catalyst 4500 Series is a centralized architecture that is designed to provide dedicated
wire-speed bandwidth to each line-card slot within the chassis. Each line card has a dedicated
bandwidth to the supervisor engine for packet processing. All network data that flows into the
Cisco Catalyst 4500 Series through the various line cards goes through the supervisor engine for
processing, even in single-slot port-to-port communications. All line cards have some per slot
bandwidth that allows network administrators to design a system that offers full dedicated
bandwidth-to-server and switch-to-switch applications and still provide high performance over
subscribed gigabit to the desktop.
A modular centralized design allows customers to use their investment in high-performance line
cards across the entire line of Cisco Catalyst 4500 Series chassis and supervisor engines. For
example, line cards that shipped with the original Cisco Catalyst 4003 Switch in 1999 will work in
the Cisco Catalyst 4500 E-Series chassis. Because of the centralized architecture of the Cisco
Catalyst 4500, all line cards deployed in a chassis benefit from the enhanced features the
supervisor engine provides including Security, QoS, Layer 2/3/4 routing, and hardware-based
IPv6.
Following are descriptions of line cards that are available for Cisco Catalyst 4500 Series switches.
Cisco Catalyst 4500 E Series Fiber Line Card
Figure 2 shows the WS-X4624-SFP-E.
Figure 2. WS-X4624-SFP-E
WS-X4624-SFP-E:
24 port Line Rate SFP line card providing 24 gigabits per slot capacity
24 ports
Supports pluggables; GLC-BX-D, GLC-BX-U, GLC-SX-MM, GLC-LH-SM, GLC-ZX-SM,
GLC-T, CWDM and DWDM
Cisco IOS
®
Software Release 12.2(44)SG or later
L2-4 Jumbo Frame support (up to 9216 bytes)
Inherits Supervisor Engine 6-E QoS capability
Compatible ONLY with Supervisor Engine 6-E
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 23
Compatible with Classic Catalyst 4500 line cards in the E-Series chassis with no
performance degradation
Mid-market and Commercial Core and Distribution deployments requiring line rate
capability
Cisco Catalyst 4500 E Series 10/100/1000 Line Cards
Figure 3 shows the WS-X4648-RJ45-E.
Figure 3. WS-X4648-RJ45-E Cisco Catalyst 4500 E-Series 48-Port Data-only 10/100/1000 (RJ-45)
WS-X4648-RJ45-E:
24 gigabits per slot capacity
48 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.2(50)SG or later
Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1)
L2-4 Jumbo Frame support (up to 9216 bytes)
Enterprise Campus, Commercial collapsed core and Branch applications requiring
enhanced performance for large file transfers and network backups
Figure 4 shows the WS-X4648-RJ45V+E.
Figure 4. WS-X4648-RJ45V+E Cisco Catalyst 4500 E-Series 48-Port 802.3af PoE and PoEP-ready
10/100/1000 (RJ-45)
WS-X4648-RJ45V+E:
24 gigabits per slot capacity
48 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.2(40)SG or later
IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control
Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1)
L2-4 Jumbo Frame support (up to 9216 bytes)
Capable of up to 30W of inline power per port
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 23
Enterprise and commercial: designed to power next generation IP phones, wireless base
stations, video cameras, and other PoE devices
Campus and Branch applications requiring enhanced performance for large file transfers
and network backups
Figure 5 shows the WS-X4648-RJ45V-E.
Figure 5. WS-X4648-RJ45V-E Cisco Catalyst 4500 E-Series 48-Port 802.3af PoE 10/100/1000 (RJ-45)
WS-X4648-RJ45V-E:
24 gigabits per slot capacity
48 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.2(40)SG or later
Bandwidth is allocated across eight 6-port groups, providing 3 Gbps per port group (2:1)
L2-4 Jumbo Frame support (up to 9216 bytes)
IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices
Campus and Branch applications requiring enhanced performance for large file transfers
and network backups
Cisco Catalyst 4500 E Series 10 Gigabit Line Card
Figure 6 shows the WS-X4606-X2-E.
Figure 6. WS-X4606-X2-E Cisco Catalyst 4500 E-Series 6-Port 10 Gigabit Ethernet (X2)
WS-X4606-X2-E:
24 gigabits per slot capacity
Up to 6 ports 10GE X2 or 12 ports 1GE SFP via TwinGig Converter Module
TwinGig modules must be used in groups of three: ports 1-3 or ports 4-6
10GBASE-X (X2) and 1GBASE-X (SFP)
Cisco IOS Software Release 12.2(40)SG or later
IEEE 802.3
24-gigabit bandwidth is allocated across six 10 Gigabit Ethernet ports (2.5:1)
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 23
L2-4 Jumbo Frame support (up to 9216 bytes)
Enterprise and commercial: designed for high-speed backbone, switch-to-switch
applications, or small server farms
Cisco Catalyst 4500 Classic Line Cards
Classic Gigabit Ethernet over Copper with Power over Ethernet
Figure 7 shows the WS-X4548-RJ45V+
Figure 7.
WS-
X4548
-RJ45V+ Cisco Catalyst 4500 48-Port 802.3af PoE and PoEP-ready 10/100/1000 (RJ-45)
WS-X4548-RJ45V+:
48 ports
10/100/1000 (RJ-45)
Cisco IOS Software Release 12.2(50)SG or later
IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control
Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group
Capable of up to 30W of inline power per port
Enterprise and commercial: designed to power next generation IP phones, wireless base
stations, video cameras, and other PoE devices that require power up to 30 Watts
Figure 8 shows the WS-X4548-GB-RJ45V.
Figure 8. WS-X4548-GB-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45)
WS-X4548-GB-RJ45V:
48 ports
10/100/1000 (RJ-45)
Cisco IOS Software Release 12.2(18)EW or later
IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control
Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 23
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices
Figure 9 shows the WS-X4524-GB-RJ45V.
Figure 9. WS-X4524-GB-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 24 Port (RJ-45)
WS-X4524-GB-RJ45V:
24 ports
10/100/1000 (RJ-45)
Cisco IOS Software Release 12.2(20)EW or later
IEEE 802.3af and Cisco prestandard PoE, IEEE 802.3x flow control
Bandwidth is allocated across six 4-port groups, providing 1 Gbps per port group
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices
Classic Gigabit Ethernet over Copper
The Cisco Catalyst 4500 Series offers a variety of gigabit-over-copper solutions for wiring closets
and server farms, enabling high-density gigabit connectivity to the desktop and servers over
Category 5 copper cabling. The line-card options for the Cisco Catalyst 4500 Series (Table 2)
include a 24- and 48-port 10/100/1000BASE-T module in both PoE and non-PoE versions. These
modules provide wiring closet investment protection by allowing Fast Ethernet desktops to migrate
to Gigabit Ethernet in the future without replacement of the switch line cards.
Figure 10 shows the WS-X4548-GB-RJ45.
Figure 10. WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)
WS-X4548-GB-RJ45:
48 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.1(19)EW or later
IEEE 802.3x flow control
Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 23
More power efficient and more cost effective than the WS-X4448-GB-RJ45
Enterprise and commercial: designed for gigabit to the desktop
Figure 11 shows the WS-X4448-GB-RJ45.
Figure 11. WS-X4448-GB-RJ45 Cisco Catalyst 4500 48-Port 10/100/1000 Module (RJ-45)
WS-X4448-GB-RJ45:
48 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3x flow control
Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group
Enterprise and commercial: designed for gigabit-to-the-desktop applications
Figure 12 shows the WS-X4424-GB-RJ45.
Figure 12. WS-X4424-GB-RJ45 Cisco Catalyst 4500 24-Port 10/100/1000 Module (RJ-45)
WS-X4424-GB-RJ45:
24 ports
10/100/1000 module (RJ-45)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3x flow control
Bandwidth is allocated across six 4-port groups, providing 1 Gbps per port group
Enterprise and commercial: designed for gigabit-to-the-desktop and server-farm
applications
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 23
Classic Gigabit Ethernet (GBIC or SFP)
The Cisco Catalyst 4500 Series offers a variety of GBIC- or SFP-enabled gigabit solutions for high-
performance Gigabit Ethernet uplinks and server farm connectivity. The five GBIC- or SFP-enabled
gigabit line-card options for the Cisco Catalyst 4500 Series include 2-, 6-, 18-, and 48-port
versions. GBIC or SFP technology allows customers to intermix intrabuilding MMF connections
and long-distance single-mode connections simply by changing the GBIC or SFP type. (See Table
3 for more information.)
Figure 13 shows the WS-X4302-GB.
Figure 13. WS-X4302-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 2 Ports (GBIC)
WS-X4302-GB:
2 ports
1000BASE-X GBIC
Cisco IOS Software Release 12.1(19)EW or later
IEEE 802.3 standard Ethernet over fiber
L2-4 Jumbo Frame support (up to 9216 bytes)
Enterprise and commercial: designed for uplinks, server farms, and switch-to-switch
applications
Metro Ethernet: GBIC flexibility designed for network operators building the next generation
of Metro Ethernet networks
Figure 14 shows the WS-X4306-GB.
Figure 14. WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC)
WS-X4306-GB:
6 ports
1000BASE-X (GBIC)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 23
L2-4 Jumbo Frame support (up to 9216 bytes)
Enterprise and commercial: designed for high-speed backbone, switch-to-switch
applications, or small server farms
Metro Ethernet: GBIC flexibility, six ports of dedicated 1000BASE-X Gigabit Ethernet
uplinks
Figure 15 shows the WS-X4418-GB.
Figure 15. WS-X4418-GB Cisco Catalyst 4500 Gigabit Ethernet Module, Server Switching 18 Ports (GBIC)
WS-X4418-GB:
18 ports
1000BASE-X (GBIC)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3, IEEE 802.3x flow control
2 ports of wire-speed 1000BASE-X Gigabit Ethernet uplinks
16 ports: 4:1 oversubscribed
Enterprise and commercial: designed for fiber to the desktop, switch-to-switch applications,
or small server farms
Metro Ethernet: GBIC flexibility designed for network operators building the next generation
of Metro Ethernet networks
Figure 16 shows the WS-X4448-GB-SFP.
Figure 16. WS-X4448-GB-SFP Cisco Catalyst 4500 Gigabit Ethernet Module, 48 Ports 1000X (SFP)
WS-X4448-GB-SFP:
48 ports
1000BASE-X (SFP)
Cisco IOS Software Release 12.2(20)EW or later
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 23
IEEE 802.3x flow control
Bandwidth is allocated across six 8-port groups, providing 1 Gbps per port group
Enterprise and commercial: designed for server farms and switch-to-switch applications
Metro Ethernet: designed for service providers to run point-to-point Gigabit Ethernet over
single-mode fiber
Figure 17 shows the WS-X4506-GB-T.
Figure 17. WS-X4506-GB-T Cisco Catalyst 4500 6-Port 10/100/1000 RJ-45 PoE IEEE 802.3af and
1000BASE-X (SFP)
WS-X4506-GB-T:
6-port 10/100/1000 and 6-port SFP (any combination of up to 6 ports can be active at one
time)
10/100/1000 RJ-45 PoE and 1000BASE-X (SFP)
Cisco IOS Software Release 12.2(20)EWA
PoE IEEE 802.3af and Cisco prestandard (RJ-45 only)
Provides full line-rate gigabit switching on all ports
L2-4 Jumbo Frame support (up to 9216 bytes)
Designed to give customers the choice of RJ-45 with or without PoE and SFP without
incurring extra costs
Enterprise and commercial: high-performance desktop connectivity and server farms;
designed to power IP phones, wireless base stations, video cameras, and other IEEE-
compliant appliances
Metro Ethernet: designed for service providers to run point-to-point Gigabit Ethernet over
single-mode fiber
Classic Fast Ethernet Power over Ethernet
Figure 18 shows the WS-X4224-RJ45V.
Figure 18. WS-X4224-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100, 24 Ports (RJ-45)
WS-X4224-RJ45V:
24 ports
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 23
10/100 (RJ-45)
Cisco IOS Software Release 12.2(20)EW or later
IEEE 802.3af PoE and Cisco prestandard PoE
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices
Figure 19 shows the WS-X4248-RJ45V.
Figure 19. WS-X4248-RJ45V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100, 48 Ports (RJ-45)
WS-X4248-RJ45V:
48 ports
10/100 (RJ-45)
Cisco IOS Software Release 12.2(18)EW or later
IEEE 802.3af PoE and Cisco prestandard
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices
Figure 20 shows the WS-X4248-RJ21V.
Figure 20. WS-X4248-RJ21V Cisco Catalyst 4500 PoE IEEE 802.3af 10/100, 48 Ports (RJ-21)
WS-X4248-RJ21V:
48 ports
10/100 (RJ-21)
Cisco IOS Software Release 12.2(18)EW or later
IEEE 802.3af PoE and Cisco prestandard
Enterprise and commercial: designed to power IP phones, wireless base stations, video
cameras, and other IEEE-compliant powered devices with improved cable management
RJ-21 connectors
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 14 of 23
Classic Fast Ethernet over Copper
Figure 21 shows the WS-X4124-RJ45.
Figure 21. WS-X4124-RJ45 Cisco Catalyst 4500 10/100 Module, 24 Ports (RJ-45)
WS-X4124-RJ45:
24 ports
10/100BASE-T module (RJ-45)
Cisco IOS Software Release 12.2(20)EW or later
IEEE 802.3
Enterprise and commercial: designed for desktop connectivity and wiring closets
Figure 22 shows the WS-X4148-RJ.
Figure 22. WS-X4148-RJ Cisco Catalyst 4500 10/100 Module, 48 Ports (RJ-45)
WS-X4148-RJ:
48 ports
10/100BASE-T module (RJ-45)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3
Enterprise and commercial: high-port-density solution for desktop connectivity
Figure 23 shows the WS-X4148-RJ21.
Figure 23. WS-X4148-RJ21 Cisco Catalyst 4500 10/100 Module, 48 Ports Telco (4 x RJ-21)
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 15 of 23
WS-X4148-RJ21:
48 ports
Telco 10/100BASE-T module (4 x RJ-21)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3
Enterprise and commercial: high-port-density solution with improved cable management
RJ-21 connectors for desktop connectivity
Classic Fast Ethernet over Fiber
Figure 24 shows the WS-X4248-FE-SFP.
Figure 24.
WS-X4248-FE-SFP Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-X (SFP)
WS-X4248-FE-SFP:
48-port 100BASE-X (SFP optional)
Customers can mix and match 100BASE-X SFP optics on the same line card.
An alternative to the Cisco Catalyst 4500 fixed 100BASE-X line cards (WS-X4148-FX-MT,
WS-X4124-FX-MT, WS-X4148-FE-LX-MT and WS-X4148-FE-BD-LC).
SFP optics supported in Cisco IOS Software Release 12.2(25)SG include 100BASE-FX,
100BASE-LX10, 100BASE-BX-D, and 100BASE-BX-U.
IEEE 802.3, IEEE 802.3ah, IEEE 802.3x flow control
Enterprise and commercial: fiber-to-the-desktop applications
Metro Ethernet: For service providers running point-to-point Fast Ethernet to the home or
business
Figure 25 shows the WS-X4124-FX-MT.
Figure 25. WS-X4124-FX-MT Cisco Catalyst 4500 Fast Ethernet Switching Module, 24-Port 100BASE-FX
(MT-RJ)
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 16 of 23
WS-X4124-FX-MT:
24 ports
100BASE-FX multimode fiber (MMF) (MT-RJ)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3
Enterprise and commercial: affordable connection for fiber-to-the-desktop applications.
Optimized for government or for anyone requiring the security and resiliency of fiber to the
desktop.
Metro Ethernet: residential customers located within a 1.2-mile (2-km) radius
Figure 26 shows the WS-X4148-FX-MT.
Figure 26. WS-X4148-FX-MT Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-FX
(MMF)
WS-X4148-FX-MT:
48 ports
100BASE-FX MMF (MT-RJ)
Cisco IOS Software Release 12.1(8a)EW or later
IEEE 802.3
Enterprise and commercial: affordable high-density connection for fiber-to-the-desktop
applications. Optimized for government or for anyone requiring the security and resiliency
of fiber to the desktop.
Metro Ethernet: residential customers located within a 1.2-mile (2-km) radius
Figure 27 shows the WS-X4148-FE-BD-L.
Figure 27. WS-X4148-FE-BD-LC Cisco Catalyst 4500 Series 48-Port 100BASE-BX10-D Fast Ethernet Line
Card for Single Strand of SMF
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 17 of 23
WS-X4148-FE-BD-LC:
48 ports
100BASE-BX10-D for single strand of single-mode fiber
Cisco IOS Software Release 12.2(18)EW or later
IEEE 802.3ah, IEEE 802.3
Bidirectional Fast Ethernet operates over a single strand of fiber
Metro Ethernet: designed for network operators building the next-generation Metro Ethernet
network over distances up to 6.2 miles (10 km)
Specification Summary
Tables 2 through 8 summarize product specifications.
Table 2. Port Information for Line Cards
Cisco Catalyst 4500 Series Min/Max Ports
Line Card
Number of
Ports Port Speed Port Type Wire Rate
4503-E 4506-E/
4507R-E
4510R-E
E-Series Line Cards
WS-X4648-
RJ45V+E
48 10/100/1000 RJ-45 2-to-1 48/96* 48/240* 48/240*
WS-X4648-
RJ45V-E
48 10/100/1000 RJ-45 2-to-1 48/96* 48/240* 48/240*
WS-X4648-
RJ45-E
48 10/100/1000 RJ-45 2-to-1 48/96* 48/240* 48/240*
WS-X4624-
SFP-E
24 1000 Pluggables 1:1 24/48 24/120 24/168
WS-X4606-
X2-E
6 10GBASE-X X2 or SFP
with TwinGig
Converter
Module
2.5-to-1 with
X2
1:1 with SFP
6/14*
12/26*
6/34*
12/68*
6/34*
12/68*
Classic Gigabit over Copper PoE Line Cards
WS-X4548-
RJ45V+
48 10/100/1000 RJ-45 PoE
IEEE 802.3af,
Cisco
prestandard
and PoEP-
ready
8-to-1** 48/96 48/240 48/384
WS-X4548-
GB-RJ45V
48 10/100/1000 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
8-to-1
**
48/96 48/240 48/384
WS-X4524-
GB-RJ45V
24 10/100/1000 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
4-to-1
**
24/48 24/120 24/168
Classic Gigabit Ethernet (Copper) Line Cards
WS-X4548-
GB-RJ45
48 10/100/1000 RJ-45 8-to-1
**
48/96 48/240 48/384
WS-X4448-
GB-RJ45
48 10/100/1000 RJ-45 8-to-1
**
48/96 48/240 48/384
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 18 of 23
Cisco Catalyst 4500 Series Min/Max Ports
Line Card
Number of
Ports Port Speed Port Type Wire Rate
4503-E 4506-E/
4507R-E
4510R-E
WS-X4424-
GB-RJ45
24 10/100/1000 RJ-45 4-to-1
**
24/48 24/120 24/168
Classic Gigabit Ethernet (GBIC or SFP) Line Cards
WS-X4302-
GB
2 1000BASE-X
IEEE 802.3
GBIC Yes 2/4 2/10 2/16
WS-X4306-
GB
6 1000BASE-X GBIC Yes 6/12 6/30 6/42
WS-X4418-
GB
18 1000BASE-X GBIC 2 ports full
16 ports
4-to-1**
18/36 18/90 18/126
WS-X4448-
GB-LX
48 1000BASE-
LX
48 SFPs
(included)
8-to-1
**
48/96 48/240 48/384
WS-X4448-
GB-SFP
48 1000BASE-X SFP 8-to-1
**
48/96 48/240 48/384
WS-X4506-
GB-T
6 + 6 10/100/1000 1000BASE-X
(SFP) RJ-45
PoE IEEE
802.3af
and Cisco
prestandard
Yes 6/12 6/30 6/42
Classic Fast Ethernet over Fiber Line Cards
WS-X4248-
FE-SFP
48 100BASE-X SFP Yes 48/96 48/240 48/384
WS-X4124-
FX-MT
24 100BASE-FX
(MT-RJ)
Yes 24/48 24/120 24/168
WS-X4148-
FX-MT
48 100BASE-FX MMF
MT-RJ
Yes 48/96 48/240 48/384
WS-X4148-
FE-BD-LC
48 100BASE-
BX10-D
SMF
Single LC
Yes 48/96 48/240 48/384
Classic Fast Ethernet over Copper Line Cards
WS-X4124-
RJ45
24 10/100 RJ-45 Yes 24/48 24/120 24/168
WS-X4148-
RJ
48 10/100 RJ-45 Yes 48/96 48/240 48/384
WS-X4148-
RJ21
48 10/100 RJ-21 Yes 48/96 48/240 48/384
Classic Fast Ethernet PoE Line Cards
WS-X4224-
RJ45V
24 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 24/48 24/120 24/168
WS-X4248-
RJ45V
48 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 48/96 48/240 48/384
WS-X4248-
RJ21V
48 10/100 RJ-45 PoE
IEEE 802.3af
and Cisco
prestandard
Yes 48/96 48/240 48/384
* E-Series line cards require E-Series chassis.
** The amount of oversubscription can be controlled by varying the number of ports used at 1000 Mbps. All
ports can use Gigabit EtherChannel
®
or IEEE 802.3ad for high-speed interconnection applications. All
oversubscribed ports use the standard IEEE 802.1x flow control (PAUSE frame) mechanism to control Gigabit
Ethernet host traffic.
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 23
Table 3. X2 Options
Interface Type Name Max Distance Cable Type Part Number
10GBASE-LR 10GBASE-LR X2
transceiver module for
SMF, 1310-nm
wavelength, SC duplex
connector
10km SMF X2: X2-10GB-LR
10GBASE-SR 10GBASE-SR X2
transceiver module for
MMF, 850-nm
wavelength, SC duplex
connector
33m MMF X2: X2-10GB-SR
10GBASE-CX4 10GBASE-CX4 X2
transceiver module for
CX4 cable, copper,
InfiniBand 4X
connector
15m Copper InfiniBand X2: X2-10GB-CX4
10GBASE-ER 10GBASE-ER X2
transceiver module for
SMF, 1550-nm
wavelength, SC duplex
connector
40km SMF X2: X2-10GB-ER
10GBASE-LX4 10GBASE-LX4 X2
transceiver module for
MMF, 1310-nm
wavelength, SC duplex
connector
300m MMF X2: X2-10GB-LX4
10GBASE-LRM 10GBASE-LX4 X2
transceiver module for
MMF, 1310-nm
wavelength, SC duplex
connector
220m MMF X2-10GB-LRM
10GBASE-ZR 10GBASE-ZR X2
transceiver module for
SMF, 1550 nm
wavelength. DOM is
not supported.
80km SMF X2-10GB-ZR
10GBASE-DWDM 10GBASE-ZR X2
transceiver module for
SMF, 32 nontunable
ITU 100-GHz
wavelengths. DOM is
supported. Dual SC/PC
connectors are
supported.
80km SMF X2-10GB-DWDM
X2 to SFP converter TwinGig Converter
Module
CVR-X2-SFP
X2 to SFP converter
(10G)
10G X2 to SFP+
Converter
CVR-X2-SFP10G
Table 4. GBIC, SFP Options
Interface Type Name Max Distance Cable Type Part Number
1000BASE-T Category 5 twisted
pair
100m Category 5
SFP: GLC-T
GBIC: WS-G5483
1000BASE-SX Short wavelength 550m MMF
SFP: GLC-SX-MM
GBIC: WS-G5484
1000BASE-LX Long
wavelength/long haul
10 km on SMF
5 km on MMF
SMF
SFP: GLC-LH-SM
GBIC: WS-G5486
1000BASE-ZX Extended distance 70 km to 100 km SMF
SFP: GLC-ZX-SM
GBIC: WS-G5487
CWDM Coarse wavelength-
division multiplexing
100 km SMF
SFP: CWDM-SFP-XXXX
GBIC: CWDM-GBIC-XXXX
DWDM Dense wavelength-
division multiplexing
GBIC only
Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 20 of 23
Table 5. Fast Ethernet Optical Transmission Characteristics
Launch Power
Port Type BER
Nominal Wavelength
(NM)
Max (dBm) Min (dBm)
100BASE-FX 2.5 x 10e-(10) 1270–1380 –14 –20
100BASE-LX10* 1 x 10e-(12) 1260–1360 –8 –15
100BASE-BX10-D3** 1 x 10e-(12) 1480–1580 –8 –14
* Draft 1.3.
** Draft 2.0.
Table 6. Fast Ethernet Optical Reception Characteristics
Receive Sensitivity
Port Type BER
Nominal Wavelength
(NM)
Max (dBm) Min (dBm)
100BASE-FX 2.5 x 10e-(10) 1270–1380 –14 –31
100BASE-LX10
Error!
Bookmark not defined.
1 x 10e-(12) 1260–1360 –8 –25
100BASE-BX10-D 1 x 10e-(12) 1260–1360 –8 –28.2
Table 7. Gigabit Ethernet Port Cabling Specifications
Port Type Wavelength
(Nanometer)
Fiber Type Core Size
(Micron)
Modal
Bandwidth
(MHz/km)
Cable Distance
Cisco 1000BASE-SX 850 MMF
62.5
62.5
50.0
50.0
160
200
400
500
722 ft (220m)
902 ft (275m)
1640 ft (500m)
1804 ft (550m)
Cisco 1000BASE-LX 1300
MMF
SMF
62.5
50.0
50.0
9/10
500
400
500
1804 ft (550m)
1804 ft (550m)
1804 ft (550m)
32,810 ft (10 km)
Cisco 1000BASE-ZX 1550 SMF 9/10 44–62 miles
(70–100 km)
Table 8. Gigabit Ethernet Link Distance
Fiber Core 62.5um MMF 50um MMF 9/10um SMF
Fiber Modal Bandwidth 160/500 MHz-km
200/500 MHz-km
400/400 MHz-km
500/500 MHz-km
1000BASE-SX 220m
275m
500m
550m
1000BASE-LX/LH 550m
550m
550m
550m
10 km
1000BASE-ZX 70 to 100 km
Coarse Wavelength-
Division Multiplexing
(CWDM)
100 km
Product Specification
Table 9 lists product specifications.
Table 9. Product Specifications
Feature Description
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Cisco WS-X4648-RJ45-E= Datasheet

Category
Network switch components
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI