Page is loading ...
Satisfying the professional’s needs
Product information
www.makitauk.com
Details correct as of:
Makita reserve the right to change specifications at any time owing to their policy of constant improvement.
Accessories shown are not necessarily supplied.
BHR261RDE
36v LXT SDS-PLUS Rotary Hammer
Noise sound pressure 91 dB(A)
Impact energy per stroke 2.5 Js
Battery Type Lithium-Ion
Vibration: Drilling 3 m/sec²
Charging Time 22 min
Vibration K factor 1.5 m/sec²
Vibration: Hammer Drilling 13.5 m/sec²
Max. in masonry 26 mm
No Load Speed 0 - 1200 rpm
Vibration: Chiselling 11 m/sec²
Max. in steel 13 mm
Max. in wood 32 mm
Blows per minute 0 - 4800 bpm
STANDARD EQUIPMENT:
194873-2 36V Li-ion Battery, DC36RA 36V BATTERY CHARGER
●
22 minute charge time with the air cooled Makstar Optimum Charging System.
●
Conveniently located push button for forward and reverse.
●
High comfort grips.
●
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
●
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt
Ni-MH battery.
●
LED job light with afterglow.
●
Triple operation mode: Rotary only, hammer only and rotary hammer.
●
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
●
Vibration absorbing handle reduces hand fatigue.
●
One-touch sliding chuck for easy bit changes.
●
Torque limiter: The drill stops when the bit hits against reinforcements.
5-11-2012
/
