Brodit 855018 Datasheet

Product 855018

855018 ProClip

Angled mount

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320288550183

Item no 855018 fits:

Cadillac CTS 14-15 (For USA)

Cadillac CTS Coupe 14-15 (For USA)

Cadillac ELR 15 (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read the instructions and look at the pictures before installing the ProClip.

1. Press the thin end of the enclosed gap opener into the gap between the center console panel fram and the

padded console edge, to widen the gap.

2. Press the angled edge on the left side of the ProClip into the gap below the gap opener. Remove the gap

opener.

3. Press the thin end of the gap opener into the gap between the console sidewall and the padded part of the

dashboard, to widen the gap. Push firmly forward on the right side of the ProClip face plate so the angled edge

flexes forward and hooks into the gap next to the gap opener. Remove the gap opener.

4. The ProClip is in place.

2(2)

Download PDF