2. Computers & electronics
  3. Telecom & navigation
  4. Holders
  5. Brodit
  6. 855018

Brodit 855018 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Brodit 855018 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
29 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 855018
855018 ProClip
Angled mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288550183
Item no 855018 fits:
Cadillac CTS 14-15 (For USA)
Cadillac CTS Coupe 14-15 (For USA)
Cadillac ELR 15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the center console panel fram and the
padded console edge, to widen the gap.
2. Press the angled edge on the left side of the ProClip into the gap below the gap opener. Remove the gap
opener.
3. Press the thin end of the gap opener into the gap between the console sidewall and the padded part of the
dashboard, to widen the gap. Push firmly forward on the right side of the ProClip face plate so the angled edge
flexes forward and hooks into the gap next to the gap opener. Remove the gap opener.
4. The ProClip is in place.
2(2)
/