12/2003
1/2
Cleaner for plastic surfaces
Properties
* Cleaning agent for use with high pressure cleaner or for manual cleaning
* for cleaning oil, grease and mineral soiling
* very gentle to materials
* manual applicable
* easily biodegradable in accordance with OECD guidelines
* pH- value in concentrate approx. 10
* clear, yellow liquid with fresh odour
Fields of application:
* window frames * plastic surfaces
* garden furniture * all water resistant surfaces
* plastic floors
Processing:
pre-dilution dosage temperature
* manual normal soiling 1+10 pre-dilution up to 40°C
heavy soiling pure pre-dilution up to 40°C
* high pressure cleaning 1+3 1-5% up to 60°C
heavy soiling pure 1-5% up to 60°C
Economy:
1 l Plastic Cleaner is sufficient for cleaning of approx. 40 m², presolved 1+3, dosage 4% at
the high-pressure appliance, medium soiled area.
Handling:
pre-dilution: first measure the necessary amount of water, then add Plastic Cleaner under
stirring and mix properly.
Remarks:
* store frostfree
Plastic- Cleaner