Distribute To:
Americas
Europe/Middle East/Africa
Asia/Pacific
MAGELLAN™ 800i 2D UPGRADE KIT NOW AVAILABLE
Overview
Datalogic ADC is pleased to announce the 2D decoding upgrade kit for
the Magellan 800i reader. This kit will add 2D decoding to any standard
1D Magellan 800i reader. To upgrade a 1D model for 2D scanning
applications, simply scan the provided programming bar code and the
software will automatically be updated in only a few seconds. Once
upgraded, the scanner will support PDF417, Micro PDF, Data Matrix,
QR Code, Aztec Code and MaxiCode symbologies for a multitude of
scanning applications. The 2D upgrade kit is available now for
purchase.
Ordering Details
1. Order the quantity of the part number below for the number of Magellan 800i units that need to be
upgraded. At the time of order, the serial number of each unit to be updated is also required.
2. Determine how the serial numbers should be bundled in groups of 1 to 20 scanners per upgrade bar
code. Each bar code produced will only work for the serial numbers that are embedded into it, up to a
maximum number of 20 Magellan’s per bar code.
3. The information in steps 1 and 2 will then be confirmed via a simple Professional Services Agreement
from Datalogic Technical Support. Once the ordering information is confirmed to Datalogic Technical
Support the upgrade bar codes will be built and sent to the designated contact.
Ordering Information
PART NUMBER
DESCRIPTION
90ACC0033
Magellan 800i 2D Upgrade Kit (1 License) – Requires Magellan 800i serial number(s) at time of order to be valid
For More Information
Please contact your local Datalogic ADC representative.
Product Bulletin:
PB20120625
Issue Date:
June 25, 2012
Product:
Magellan™ 800i
General Availability:
June 20, 2012
Business Unit:
Fixed Retail
Contact:
Please contact your local Datalogic ADC Office for more information
/
