(x2)
Pan head screws
Additional bracing/ structure may be required to support fixture.
(x4)
(by others)
Appropriate fasteners
Attention:
Exploded View and Part Call-out
Integral Shroud
(wedge)
J-box gasket
Mounting plate
J-box
(by others)
Fixture and ballast
assembly
Preparing Fixture for Mounting
#10-32 x 1/2"
#10-32 x 1/2"
Pan head screws
(x3)
Installing Mounting Plate
mounting plate over j-box using appropriate
Gasket
Using dimensions provided on page 3, install
fasteners(by others).
J-box
(by others)
2.
Ensure gasket seals J-box.
1.
Mounting
plate
ȱȱȱȱȱȱȱǯȱȱȱ
ȱȱȱȦȱȱȱȱ
ȱŗȱȱř
Ř
ADY080112 REV A(ECN080444)
DZȱȱȱȱ¢ȱȱȱ
ȱ¢ȱȱȱǯ
ȱ
ȱȱŖŗ ȱȱŖŘ ȱȱŖř
ȱȱȱȱȱȱȱ¡ȱ¢ǯ
ŗ
22 1/2"
Large, OUTDOOR
SSIxx
(Shroud, Integral)
#10-32 x 1/2"
(x3)
Pan head screws
safe place.
Pull fixture from mounting plate and store in a
3.
enclosure.
x 1/2" Pan head screws from behind ballast
#10-32 x 1/2"
Pan head screws
(x2)
1.
To mount fixture, begin by removing both #10-32
x 5/8" pan head screws and remove shroud.
2.
While supporting fixture, remove all three #10-32
Ballast
enclosure
11
5
8
"
295.28
C
L
2
"
38.10
635
25"
1
490.98
"19
32
11
368.30
"14
2
1
1
23
1
590.55
"
4
2x 1
1
2
"
38.05
ȱ
ȱȱŖŗ ȱȱȱŖŘ ȱȱȱŖř
ȱȱȱȱȱȱȱȱ¡ȱ¢
Mounting Plate Dimensions (In and mm)
Lamping Size Chart
(lamps provided by others)
DZȱȱȱȱ¢ȱȱȱ
ȱȱȱȱȱȱȱǯȱȱȱ
ȱȱȱȦȱȱȱȱ
ȱ¢ȱȱȱǯȱȱ
ȱ
ȱ
ȱ¡ȱ¢ǯȱ
22 1/2"
Large, OUTDOOR
SSIxx
(Shroud, Integral)
ȱřȱȱř
ADY080112 REV A(ECN080444)
FIXTURE SIZE
(inches/ mm)
WATTAGE
# OF
LAMPS
LAMP TYPE LAMP DESCRIPTION
LAMP
(not to scale)
22
1/2 /571.5 mm 250 W 1 ET18 Metal Halide
22
1/2 /571.5 mm 400 W 1 ET18 Metal Halide
22
1/2 /571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2 /571.5 mm 32 W 2 T4 Compact Flourescent
22
1/2 /571.5 mm 42 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22 1/2 /571.5 mm 400 W 1 ET18 Metal Halide
22
1/2 /571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2 /571.5 mm 350 W 1 T3 Halogen(Double Ended)
22
1/2 /571.5 mm 500 W 1 T3 Halogen(Double Ended)
/
