Roberts R8250-1 Installation guide

Brand: Roberts

Model: R8250-1

Type: Installation guide

The brand that stands for excellence.

Universal Floor Polish

R8250

D0412-7390

Roberts Consolidated Industries, Inc. www.robertsconsolidated.com U.S. Headquarters (866) 435 8665

Allow floor to dry a minimum of 1 hour before walking on the

floor. If more gloss is desired, a second coat may be applied

after 2 hours. Allow floor to dry for 24 hours before replacing

furniture and rugs on floor and before allowing heavy

foot traffic.

For application questions not covered please contact our

Technical Services Department at (706) 277-5294.

Limited Warranty:

Roberts warrants that this product will be free from

manufacturing defects for 12 months from the date of

purchase, when applied in accordance with Roberts’

instructions and industry standards. Roberts’ sole liability is

to either supply new product

or refund the original purchase

price. This limited warranty

excludes all other express

warranties including the

warranties of merchantability

for a particular use or

purpose. Any implied

warranties arising by

operation of law are limited to

one year. Roberts will not be

liable for any incidental or

consequential damages. Visit

www.robertsconsolidated.com

for additional information and

full warranty details.

Available Size:

Roberts

R8250 is a commercial strength floor polish for

use on vinyl composition tile (VCT), vinyl tile and plank,

prefinished hardwood and ceramic tile. R8250 quickly

restores luster and shine to floors!

R8250 may also be high-speed buffed to a high gloss.

Features:

• Easy to apply

• Low odor, water-based formula

• Polishes up to 2000 sq. ft. per gallon

General:

Not for use on unfinished wood or unsealed floors.

Prior to application, clean floor thoroughly and allow floor to

dry completely.

Physical Characteristics:

Color: Milky white; dries clear

VOC: 38 g/L

Flash Point: > 200°F TCC

Shelf Life: One year in unopened container

Application Instructions:

Apply polish to a small section of the floor.

Using a slightly damp microfiber pad or similar applicator

pad, spread the polish until it is evenly worked into the

flooring. Make sure to work with the grain when polishing

wood. R8250 can also be high-speed buffed to a high gloss.

Note: Use a clean pad to apply Roberts R8250 (do not use

the same pad that was used for cleaning the floor).

Continue working in small sections until entire floor

is polished.

1 Gallon R8250-1 075378825012

SIZE PRODUCT # UPC

Roberts R8250-1 Installation guide

Roberts R8250-1 Installation guide

Roberts R8250-1 Installation guide

Related papers

Other documents