NetSafety Upgrade Kit for UNI-TRAN-Basic, Standard, Premium Owner's manual

NetSafety
Brand
NetSafety
Model
Upgrade Kit for UNI-TRAN-Basic, Standard, Premium
Type
Owner's manual
H2S-100-UPG KIT
Part Number: MAN-0049-00 Rev 0
11
11
1
Identify which type of controller you have
UNI-TRAN STANDARD/PREMIUM H2S DETECTOR
ST1210 H2S SENSOR
RED
BLACK
+24Vdc
COMMON
4-20 O/P
+ vDC (iso)
WHITE
COMMON
+24Vdc
4-20 O/P
B
R
W
UNI-TRAN BASIC H2S DETECTOR
ST1210 H2S SENSOR
Go to Page 2
Go to Page 4
Controller Identification
11
11
1
22
22
2
Turn off power to the unit.
Disconnect the ST1210 sensor from the enclosure.
Connect the ST1200 sensor into the Basic UNI-TRAN Controller enclosure.
Refer to the wiring diagram on the next page.
Connect the Red sensor wire to the +24Vdc terminal.
Connect the black wire to the Red terminal
Connect the green wire to the ground lug
Connect resistor package between Black and Red terminal.
Turn the unit’s power on
Calibrate the unit.
UNI-TRAN Modifications
22
22
2
UNI-TRAN Basic
UNI-TRAN Modifications
33
33
3
RED
BLACK
GREEN
ST1200 SENSOR
BASIC UNI-TRAN CONTROLLER
+24Vdc
COMMON
4-20 O/P
B
R
W
RESISTOR
TERMINAL BLOCK
BLACK WIRE
Enlarged View
33
33
3
Turn off power to the unit.
Disconnect the ST1210 sensor from the enclosure.
Connect the ST1200 sensor into the Standard/premium UNI-TRAN Controller enclosure.
Refer to the wiring diagram on the next page.
Connect the Red sensor wire to the +24Vdc terminal.
Connect the black wire to the Red terminal
Connect the green wire to the ground lug
Connect resistor package between Black and Red terminal.
Turn the unit’s power on..
Calibrate the unit.
UNI-TRAN Modifications
44
44
4
UNI-TRAN Standard/Premium
UNI-TRAN Modifications
+24Vdc
COMMON
4-20 O/P
+ vDC (iso)
BLACK
RED
Black (-)
Red (+)
Black (-)
Red (+)
ST1200 SENSOR
SEPARATION KIT
P/N JB2-2-ASSY
STANDARD/PREMIUM
UNI-TRAN CONTROLER
B
R
W
CUT SHIELD
SHIELD TO GROUND
Green
55
55
5
RESISTOR
TERMINAL BLOCK
BLACK WIRE
Enlarged View
66
66
6
2721 Hopewell Place NE
Calgary, Alberta, Canada T1Y 7Y7
Telephone: (403) 219-0688 Fax: (403) 219-0694
www.net-safety.com
E-mail: netsafe@net-safety.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

NetSafety Upgrade Kit for UNI-TRAN-Basic, Standard, Premium Owner's manual

NetSafety
Brand
NetSafety
Model
Upgrade Kit for UNI-TRAN-Basic, Standard, Premium
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents