PrecisionPower XO-2 Owner's manual

Type
Owner's manual
70Hz 100Hz 150Hz 180Hz
350Hz 400Hz 450Hz 500Hz
Frequency Selection
180Hz
*HighPass Dip Switch
100Hz
*LowPass Dip Switch
(Factory Settings)
Stereo/Mono
x10 Switch
x10 Switch
RCA Lowpass Output RCA Input RCA Highpass Output
*PLEASE NOTE THAT THE HIGHPASS AND LOWPASS SWITCHES
ARE LOCATED OPPOSITE TO THEIR RCA OUTPUT LOCATIONS.
Specifications
Input Impedance: 10k Ohm
Input Sensetivity: .1-3 Volts
Output Load: 2k-10k Ohm
Crossover Slope: 12dB/Octave
PassBand Gain: Unity Gain
Distortion: <.01%
S/N Ratio: >98dB
Power Requirement: 11-16 Volts
Dimensions: 6.6" x 3.75" x 1"
All Switches are in the on Position
Example:
Green Wire: +12Volts
Blue Wire: Remote
Black Wire: Ground
Sedona XO-2
  • Page 1 1

PrecisionPower XO-2 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI