Camco 39072 Installation guide

Type
Installation guide
39072
Dual Flush
is a unique holding
tank and sewer hose
rinser with two-way jet
cleaning action.
Attach Dual Flush
to any
standard water hose and
create a powerful spray
that helps reduce odors
and malfunctions.
Water hose
To holding
tank
#0810 885450
Sewer hose
Camco Manufacturing, Inc.
121 Landmark Drive / Greensboro, NC 27409
Made in USA
1-800-334-2004 / www.camco.net
Our return policy is limited to the replacement of original purchase. No other
liability, responsibility or warranty is expressed or implied, including any
regarding merchantability or suitability for a particular purpose.
CALIFORNIA PROPOSITION 65 WARNING:
This product contains chemicals known to the
State of California to cause cancer, and birth defects
or other reproductive harm.
4. Turn black valve to TANK
position to direct water jet
toward tank for flushing.
Close waste valve when
complete.
5. Reverse water jet direction
by turning valve to HOSE
position. This will rinse
sewer hose.
6. Place valve in OFF position
to end flushing.
1. Connect Dual Flush
between sewer hose and
RV’s dump connection.
2. Empty black water tank, then
grey water tank. Leave Dual
Flush
connected with waste
valve open.
3. Connect black vacuum
breaker between faucet
and water hose. (Always
use a vacuum breaker with
the Dual Flush
to avoid
fresh water contamination.)
Connect other end of water
hose to threads on side of
Dual Flush
.
Sewer
hose
To
holding
tank
  • Page 1 1
  • Page 2 2

Camco 39072 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI