2. Canon
  3. PIXMA MP210
PIXMA MP210

Canon PIXMA MP210 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Canon PIXMA MP210 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What should I do if I need to align the Print Head?
    How do I register my product?
    What should I do if the lines are misaligned or the print quality is unsatisfactory after installing the MP Drivers?
    What do I do if the Found New Hardware or Found New Hardware Wizard screen appears automatically?
    What should I do if I cannot go to the next procedure after three minutes?
    What if I want to select particular items to install?
Start Here
Easy Setup Instructions
Important
When moving the machine, carry the machine at both ends as shown below. Do
not lift the machine by grasping the Paper Support Extension.
aPlacethemachineonaatandhorizontalsurface,anddonot
placeanyobjectsinfrontofthemachine.
Removealltheshippingtapesandprotectivematerialontheoutsideofthe
machine.
ThenopenthePaperOutputTray.
bLifttheScanningUnit(PrinterCover),andpulltheScanningUnit
Supportdownintoplace.
ScanningUnit(PrinterCover)
cRemovetheprotectivematerialontherightside.
ProtectiveMaterial
Caution
Before turning on the machine, remove all of the shipping tapes.
1 Prepare the Machine
dLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
ePlugthepowercordinthebackofthemachineandconnectthe
otherendtothewalloutlet.
PowerCord
DocumentCover
Important
Make sure that the Document Cover is closed.
Note
DoNOTconnecttheUSBcableatthisstage.
fPresstheON/OFFbuttontoturnonthemachine.Themachine
willinitialize.Waituntilthe
Powerlampstopsashingand
remainslitgreen.
gLifttheScanningUnit(PrinterCover),andpulltheScanning
UnitSupportdownintoplace.TheFINECartridgeHolder
automaticallymovestotheleft.
ScanningUnit(PrinterCover)
h
Writedowntheserialnumberlocatedinsidethemachine.You
willneedthistoregisteryourproduct.
SerialNumber
2 Install the FINE Cartridges
aRemovetheBlackFINECartridgefromitsbox.
bRemovetheprotectivetapegently.
ProtectiveTape
PrintHeadNozzles
ElectricalContacts
Important
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.
The machine may not print out properly if you touch it.
Do not reattach the protective tape once you have removed it.
Be careful not to stain your hands or surrounding work area with ink on the
removed protective tape.
cInserttheBlackFINECartridgeslightlyslantedintotheleftslot
B
.
•
•
•
dPushuptheFINECartridgeuntilitclicksintoplace.
Important
For correct machine operation, make sure the FINE Cartridge is securely inserted.
Click
eRepeattheprocedurefortheColorFINECartridge,insertingit
intotherightslot
C
.
fLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
Important
Once you have installed the FINE Cartridges, the LED will ash green. Wait until
the LED stops ashing and displays 1. It takes about one to two minutes.
Hardware setup is complete.
Photo All-in-One
Q T 5 1 2 0 6 V 0 1
Unpack the Machine
Pleaseconrmtheincludeditemsagainsttheillustrationprintedonthelidofthepackingbox.
AUSBcableisnecessarytoconnectthemachinewithyourcomputer.
•
•
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.
Windows
Macintosh
Note
ThescreensbelowrefertoWindowsVista™operatingsystemUltimateEdition
(hereafterreferredtoas“WindowsVista”)installation.
Screensmayvarydependingontheoperatingsystemyouareusing.
Logintoauseraccountwiththeadministratorprivilege.
Beforeinstallingthesoftware,disableallanti-virusprogramsandautomatically
loadingprograms.
Amessageaskingforyourconfirmationtorestartyourcomputermayappear
duringtheinstallationprocess.Ifthismessageisdisplayed,followtheon-screen
instructionsandclickOK.
The installationresumesfromwhereitleftoffwhenyourcomputerhasbeenrestarted.
aBesuretoTURN THE MACHINE OFFbeforecontinuing.
(1) PresstheON/OFFbutton.
(2) MakesurethatthePowerlampstopsashing.
bTurnthecomputeronandstartWindows.
Important
If the Found New Hardware or Found New Hardware Wizard screen appears
automatically, remove the USB cable connected to your computer. Click Cancel
to quit the screen. In Windows Vista, the screen may close automatically when
the USB cable is unplugged. Then turn off the machine and proceed from step
c to install the software.
cInserttheSetupCD-ROM.Thesetupprogramshouldrun
automatically.
InWindowsVista,gotoStepd.InWindowsXPandWindows2000,goto
Step
f.
dIftheAutoPlayscreenappears,clickRun Msetup4.exe.
eIftheUser Account Controlscreenappears,clickContinue.
Ifthesamescreenreappearsinsubsequentsteps,click
Continue.
fWhenthemainmenuappears,clickEasy Install.
TheMPDrivers,On-screenManuals,andapplicationsoftwareareinstalled
automatically.
Note
Ifyouwanttoselectparticularitemstoinstall,clickCustom Installandfollowtheon-
screeninstructionstoproceedtheinstallation.
•
•
•
•
gWhenthelistofapplicationstoinstallappears,conrmthe
contents,click
Install.
Note
Movethecursoroveritemstodisplayexplanationsofeachapplication.
hReadtheLicenseAgreementcarefullyandclickYes.The
softwareinstallationscreenmayappearduringtheinstallation
process.Followtheon-screeninstructionstoinstallthe
software.
iWhenthePrinter Connectionscreenappears,connect
oneendoftheUSBcabletothecomputer,theothertothe
machine,then
TURN THE MACHINE ON.TheMPDriverswill
beginidentifyingtheprinterportbeingused.
Important
If you cannot go to the next procedure after three minutes, refer to “Trouble-
shooting” instructions in the User’s Guide on-screen manual.
USB
ToComputer
→
jWhenthePrint Head Alignment Recommendedscreen
appears,click
Next.
kWhentheSetup Completescreenappears,clickNext.
lWhentheUser Registrationscreenappears,clickNext.
Note
Toregisterlater,clickCancelandgotoStepm.Aftersoftwareinstallationiscomplete,
double-click onthedesktop.
Followon-screeninstructionstoregisteryourproduct.Youwillneedyour
productserialnumber,whichislocatedontheinsideofthemachine.See
Step1-
honthefrontpage.
mWhenthePIXMA Extended Survey Programscreen
appears,conrmthemessage.Wewouldappreciateitifyou
wouldtakepartinthisprogramregardingtheuseofCanon
printers.Ifyoucanagree,click
Agree.
nWhentheInstallation completed successfullyscreen
appears,click
Exit.
IfRestartisdisplayed,makesurethattheRestart the system now
(recommended)checkboxisselected,thenclickRestart.
Note
IfstraightlinesaremisalignedorprintqualityisnotsatisfactoryafterinstallingtheMP
Drivers,youmayneedtoalignthePrintHead.Referto“Aligning the Print Head” in
the Quick Start Guide.
Software installation is now complete.
Windows
®
Software Installation
Note
SinceMac
®
OS9,MacOSXClassicenvironments,orMacOSXv.10.2.7orearlier
arenotsupported,donotconnectthemachinetothese.
ThescreensbelowrefertoMacOSXv.10.4.xinstallation.Screensmayvary
dependingontheoperatingsystemyouareusing.
LogonasanAdministrator.
Beforeinstallingthesoftware,disableallanti-virusprogramsandautomatically
loadingprograms.
aConnectoneendoftheUSBcabletothecomputerandthe
othertothemachine.
Note
Makesurethemachineisturnedon.
USB
bTurnonyourMacandinserttheSetupCD-ROM.
Note
IftheCD-ROMfolderdoesnotopenautomatically,double-clicktheCD-ROMicon
onthedesktop.
cDouble-clicktheSetupicon.
dWhentheAuthenticatescreenappears,enteryour
administratornameandpassword.Click
OK.
Ifyoudonotknowyouradministratornameorpassword,click
,thenfollowtheon-screeninstructions.
eWhenthemainmenuappears,clickEasy Install.
TheMPDrivers,On-screenManuals,andapplicationsoftwareareinstalled
automatically.
Note
Ifyouwanttoselectparticularitemstoinstall,clickCustom Installandfollowtheon-
screeninstructionstoproceedtheinstallation.
fWhenthelistofapplicationstoinstallappears,conrmthe
contents,thenclick
Install.
Note
Movethecursoroveritemstodisplayexplanationsofeachapplication.
gReadtheLicenseAgreementcarefullyandclickYes.The
softwareinstallationscreenmayappearduringtheinstallation
process.Followtheon-screeninstructionstoinstallthe
software.
hWhenthePrint Head Alignment Recommendedscreen
appears,click
Next.
iWhentheSetup Completescreenappears,clickNext.
•
•
•
•
Macintosh
®
Software Installation
jWhentheUser Registrationscreenappears,clickNext.
Note
Toregisterlater,clickCancelandgotoStepk.Aftersoftwareinstallationiscomplete,
double-click onthedesktop.
Followon-screeninstructionstoregisteryourproduct.Youwillneedyour
productserialnumber,whichislocatedontheinsideofthemachine.See
Step1-
honthefrontpage.
kWhentheInstallation completed successfullyscreen
appears,click
Restart.
Thesystemisrestartedautomatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restartingthecomputerwhileconnectedtothemachinemaycausethe
machinenottobedetected.Toresolvethis,eitherunplugtheUSBcable
thenplugitbackinagain,orturnthemachineoffthenbackonagain.
Note
WhenusingMacOSXv.10.2.8tov.10.3.x,beforeusingtheOperationPanelon
themachinetosaveoriginalsscannedfromthePlatenGlasstothecomputer,it
isnecessarytoselectMP Navigator EX 1.0orMP Navigator EX 1asthelaunch
applicationonImageCaptureunderApplications.Fordetails,referto“Scanning
Images” in the User’s Guideon-screenmanual.
Ifstraightlinesaremisalignedorprintqualityisnotsatisfactoryafterinstallingthe
MPDrivers,youmayneedtoalignthePrintHead.Referto“Aligning the Print
Head” in the Quick Start Guide.
Software installation is now complete.
•
•
Partno.
QT5-1206-V01©2007CanonInc.“Microsoft”isaregisteredtrademarkofMicrosoftCorporation.“Windows”isatrademarkofMicrosoftCorporation,registeredintheU.S.andothercountries.“WindowsVista”isatrademarkofMicrosoftCorporation.“Macintosh”and“Mac”aretrademarksofAppleInc.,registeredintheU.S.andothercountries.
XXXXXXXXPRINTEDINVIETNAM
/